DFC Components definition

DFC Components means a quantity of Repeating Components (RC), Non-Repeating Components (NRC) and Module Components from which a complete Fuel Cell Stack Module may be assembled.
View Source
DFC Components means one set of RC and NRC components necessary for the assembly of one complete DFC Module.
View Source
DFC Components means a quantity of Repeating Components (RC) and Non-Repeating Components (NRC) from which a complete DFC Module may be assembled. 1.11 “DFC Power Plants” or “DFC Plants” means the complete power plants manufactured by Seller at the facilities of Seller or its sub-vendors, including BOP and DFC Modules. 1.12 “DFC Specifications” means the documents prepared by Seller containing performance specifications for the DFC Plants. 1.13 “DFC Manuals” means the documents normally prepared and routinely provided by Seller which contain, but are not necessarily limited to, instructions for installation, operation, initial start-up, field procedures, instrumentation and controls, and maintenance of the DFC Plants. 1.14 “POSCO Plant” or “Plant” shall mean the carbonate-based fuel cell power plant which is manufactured by Buyer or POSCO Affiliate using the Direct FuelCell® technology of the Seller . 1.15 “Engineer” means the person designated by the Buyer as engineer, with notification of such designation being sent to the Seller, for the purpose of the inspection and testing stipulated in Article 9 hereof, or in absence of such notification, the word Engineer means the Buyer or its duly authorized representatives. 1.16 “Equipment” means the DFC Modules, Repeating Components, Non-Repeating Components, and any machinery, equipment, apparatus, instruments, ship loose items, materials and other items which are supplied by Seller pursuant to this Contract. 1.17 “Facilities” means the connections, interfaces, and supporting equipment for the Plant, including the support system, slab or pedestal on which the Plant is located, fuel supply, electrical distribution system, and equipment connected to the Plant’s interface points but excluding the Plant itself. 1.18 “EXW” or “Ex Works” shall have the meaning assigned as published by the United Nations Commission on International Trade Law in the “International Commercial Terms (INCOTERMS 2000) “ as amended, except as may be otherwise provided herein. 1.19 “Force Majeure” shall mean unforeseen circumstances beyond the reasonable control and without the fault or negligence of either party and which such party is unable to prevent or provide against the exercise of reasonable diligence including, acts of God, any acts or omissions of any civil or military authority, earthquakes, strikes or other labor disturbances, wars (declared or undeclared), terrorist and similar criminal acts, epidemics, civil unrest and riots. 1.20 “Fuel Cell ...
View Source

Examples of DFC Components in a sentence

  • The expected MW output rating for the DFC Modules and DFC Components to be sold to Buyer under this Contract is shown in Annex A.

  • The Seller warrants, for a period of eighteen (18) months from the date of EXW shipment, or twelve (12) months from the date of first operation at the installation site, whichever occurs first, that (i) the DFC Modules and DFC Components to be delivered hereunder shall be free from defects in material and workmanship; and (ii) the DFC Modules and DFC Components conform to the DFC Module Specifications and DFC Component Specifications and other requirements set forth in this Contract.

  • In the event the POSCO Plant fails to achieve at least 95% of the guaranteed power output and/or efficiency solely due to the fault of the DFC Module or DFC Components after repeated FA tests, Seller shall notify Buyer in writing of the reason for such failure.

  • If the reason is solely attributable to causes related to DFC Module or DFC Components provided by Seller, then Seller shall have a period of six (6) months from the first FA test to take necessary corrective actions and repeat the FA test to achieve greater than 95% of the guaranteed power output and/or efficiency.

  • For POSCO Modules assembled by POSCO Power and/or POSCO Affiliates from DFC Components supplied by FCE, POSCO Power shall be responsible to the end user for warranty, performance guarantees and service obligations related to the POSCO Modules.

  • The Seller shall conduct normal and standard inspections of all materials and the workmanship of all DFC Components to be supplied under this Contract in accordance with the standard pre-shipment factory inspection procedures for DFC Components.

  • The parties shall negotiate in good faith to agree on the standard pre-shipment factory inspection procedures for DFC Components which will be included in the ▇▇▇▇▇.

  • One copy of the Inspection Report for each set of DFC Components provided pursuant to this contract shall be supplied to Buyer prior to shipment.

  • For DFC Modules assembled by Buyer and/or POSCO Affiliate from DFC Components supplied by Seller, Buyer shall be responsible to the end user for warranty, performance guarantees, and service obligations related to the DFC Modules.

  • Seller shall prepare an Inspection Report documenting results of the standard pre-shipment factory inspections for DFC Components.

Related to DFC Components

  • Bearing components means the bearing element, retainer, inner race, or outer race.

  • Components means articles, materials, and supplies incorporated directly into end products at any level of manufacture, fabrication, or assembly by the Contractor or any subcontractor.

  • Structural components means liners, leachate collection systems, final covers, run-on/run-off systems, and any other component used in the construction and operation of the MSWLF that is necessary for protection of human health and the environment.

  • Class X-A Components The Class A-1 Component, Class A-2 Component, Class A-3 Component, Class A-4 Component, Class A-AB Component and Class A-S Component, each of which constitutes a separate class of “regular interests”, within the meaning of Code Section 860G(a)(1), in the Upper-Tier REMIC with a pass-through rate equal to its Class X Strip Rate from time to time and a notional amount equal to its Component Notional Amount from time to time.

  • Removed Components means components of the Project or portions thereof which the Company or any Sponsor Affiliate in its sole discretion, elects to remove from the Project pursuant to Section 4.04 hereof or as a result of any Condemnation Event.