Application for Grant Sample Clauses

The 'Application for Grant' clause outlines the process and requirements for submitting a formal request to receive a grant. Typically, this clause specifies the necessary documentation, eligibility criteria, and deadlines that applicants must meet, such as providing a detailed project proposal or budget. Its core function is to establish a clear and standardized procedure for evaluating and awarding grants, ensuring fairness and transparency in the selection process.
Application for Grant to draw sick leave days from the bank shall be submitted to the sick leave bank committee. In order for an employee to be eligible to apply to sick leave benefits from the sick leave bank, the employee must first: i. Be a contributor to the bank prior to September 15 of the contracted year or two weeks after active employment. An employee upon learning of a catastrophic illness or life-threatening incident as outlined in the PURPOSE shall be ineligible to join the sick leave bank. ii. Have been absent from work more than ten continuous working days due to long illness or accident as described in the above PURPOSE. iii. Have used all his/her accumulated sick and personal leave days or used thirty of his/her total accumulated sick leave days. If an employee has less than ten days of sick leave to use before starting to draw from the sick leave bank, his/her salary will be reduced in full for the number of days up to ten. iv. Provide verification of need for extended leave from a qualified professional. A second verification may be requested at the discretion of the sick leave bank. v. Contact Human Resources to apply for use of sick leave bank. The number of sick leave days granted shall not exceed the number of days absent from work due to illness or accident. Bank’s grants to individual employees will not be carried over from one fiscal year to another; all such grants will end at the termination of the school year. If the employee does not use all the days granted by the committee, the unused sick leave days will be returned to the bank. In no case shall an employee be granted more than a total of ninety (90) days per fiscal year from the sick leave bank for all illnesses or disabilities.
Application for Grant. (a) In general (1) the plan is received by the Secretary not later than September 1 of the fiscal year prior to the fiscal year for which a State is seeking funds, and the report from the previous fiscal year as required under section 300x–51 of this title is received by December 1 of the fiscal year of the grant; (2) the application contains each funding agreement that is described in this subpart or subpart III for such a grant (other than any such agreement that is not applicable to the State); (3) the agreements are made through certifi- cation from the chief executive officer of the State; (4) with respect to such agreements, the ap- plication provides assurances of compliance satisfactory to the Secretary; (5) the application contains the plan re- quired in section 300x–1(a) of this title, the in- formation required in section 300x–4(b)(3)(B) 1 of this title, and the report required in section 300x–52(a) of this title; (6) the application contains recommenda- tions in compliance with section 300x–4(a) of this title, or if no such recommendations are received by the State, the application other- wise demonstrates compliance with such sec- tion; and (7) the application (including the plan under section 300x–1(a) of this title) is otherwise in
Application for Grant. Application to draw sick leave days from the bank shall be submitted to the sick leave bank committee. In order for an employee to be eligible to apply to sick leave benefits from the sick leave bank, the employee must first:
Application for Grant 

Related to Application for Grant

  • Application Form To apply for a pole attachment or conduit occupancy license under this Agreement, Applicant shall submit to SWBT two signed copies of the appropriate application forms. SWBT represents that the forms specified in subsections (a)-(b) are forms in use prior to the effective date of this Agreement and that SWBT is in the process of revising such forms to conform to the provisions of this Agreement and to streamline the application process. The parties therefore agree that the forms specified in subsections (a) and (b) will be interim forms only. SWBT reserves the right to change the format and content of these forms upon 60 days written notice to Applicant. (a) To apply for a pole attachment license, Applicant shall submit to SWBT two signed copies of SWBT’s Form SW-9434 (“Access Application and Make- Ready Authorization”) together with completed Form SW-9433 (“Pole Attachments”). An application for a pole attachment license will not be complete or subject to processing by SWBT until these forms have been submitted to SWBT; provided, however, that such forms will be deemed to be substantially complete if they contain the information specified in subsections (c)-(h) below, as applicable. Copies of Forms SW-9433 and SW-9434 are attached to this Agreement as parts of APPENDIX III. (b) To apply for a conduit occupancy license, Applicant shall submit to SWBT two signed copies of SWBT’s Form SW-9434 (“Access Application and Make-Ready Authorization”) together with completed Form SW-9435 (“Conduit Occupancy”). An application for a conduit occupancy license will not be complete or subject to processing by SWBT until these forms have been submitted to SWBT; provided, however, that such forms will be deemed to be substantially complete if they contain the information specified in subsections (c)-(h) below, as applicable. Copies of Forms SW-9434 and SW-9435 are attached to this Agreement as parts of APPENDIX III. (c) Each application for a license under this Agreement shall include, at a minimum, the following information: (1) the poles, ducts, and conduits (including all manholes) along Applicant’s proposed route to or within which Applicant desires to attach or place its facilities; (2) a description of the facilities to be attached to SWBT’s poles and a description of the facilities to be placed within each component of SWBT’s conduit system (including but not limited to ducts, conduits, manholes, and handholes) along the proposed route; (3) for poles, the proposed points of attachment; (4) for building entrance or building distribution ducts or conduits or other space within a building, a conspicuous statement, as required by Section 5.06 of this Agreement, that the application pertains to a building entrance or building distribution duct or conduit or other space within a building; (5) if applicable, a conspicuous notation that the space requested is not to be assigned (or billed) to Applicant until SWBT has received Applicant’s written instruction to make such assignment or issued a license authorizing Applicant to occupy the space requested; and (6) if applicable, a conspicuous statement that Applicant intends to occupy the space before the issuance of a license, as provided in Section 8.03 of this Agreement. (d) Facilities descriptions which apply to multiple pole attachments or conduit occupancies need only be described once on any form. Facilities descriptions shall include, at a minimum, the following information: (1) the number and types of cables, including the physical size (diameter) and weight (weight per foot); (2) the number and types of strands, if any, which will be used to support the cables, including the rated holding capacity expressed in thousand pound increments (e.g., 2.2M) of such strands; and (3) sufficient information to identify and describe the physical characteristics (size, dimensions, and weight) of apparatus enclosures and other facilities to be attached to SWBT’s poles or placed in SWBT’s conduit system. (e) When it appears to Applicant that facilities modification, capacity expansion, or make-ready work may be required to accommodate Applicant’s access requests, Applicant shall describe the facilities modification, capacity expansion, or make-ready work which Applicant proposes. Applicant shall also describe its plans, if any, to use any infrequent construction technique or connectivity solution authorized under Section 6.03 to avoid high or unusual expenditures and state its reasons for the use of such technique or solution. (f) Applicant acknowledges that the poles along a particular pole line or route may include poles owned by firms (such as electric utilities) other than SWBT, that it may be necessary for SWBT to rearrange its facilities or perform other make-ready work on poles other than poles it owns or controls in order to accommodate Applicant’s request for access to SWBT’s poles and that, at the time an application is submitted, it may be difficult for Applicant to determine with certainty whether a particular pole is owned or controlled by SWBT or by another entity. Accordingly, the application shall, to the extent feasible, identify all poles utilized by SWBT (without regard to ownership) along Applicant’s proposed route. (g) Each application for a license under this Agreement shall be accompanied by a construction schedule showing Applicant’s projected dates for beginning and completing construction at the sites specified in the application. Information on this schedule may be used by SWBT’s engineering and outside plant construction personnel in scheduling work required to process Applicant’s applications and scheduling such capacity expansions, make- ready work, and facilities modifications, if any, as may be necessary to accommodate Applicant’s facilities. (h) Applicant may include multiple cables in a single license application and may provide multiple services (e.g., CATV and non-CATV services) under the same cable sheath or jacket. When both CATV and non-CATV services are provided under the same cable sheath or jacket, or CATV and non-CATV services are provided using different cables attached or lashed to the same strand or otherwise occupying the same space on a pole or the same duct or inner duct within a conduit, Applicant will so advise SWBT and SWBT shall, if permitted by law, adjust its charges to enable SWBT to charge Applicant the rate applicable to telecommunications carriers rather than the rate applicable to cable television systems solely to provide cable service.

  • Application for approval 3.1. The application for approval of a vehicle type with regard to the AEBS shall be submitted by the vehicle manufacturer or by his authorised representative. 3.2. It shall be accompanied by the documents mentioned below in triplicate: 3.2.1. A description of the vehicle type with regard to the items mentioned in paragraph 2.4., together with a documentation package which gives access to the basic design of the AEBS and the means by which it is linked to other vehicle systems or by which it directly controls output variables. The numbers and/or symbols identifying the vehicle type shall be specified. 3.3. A vehicle representative of the vehicle type to be approved shall be submitted to the Technical Service conducting the approval tests.

  • Application for Benefits Requests for short-term leaves shall be in writing, upon the appropriate form prescribed and provided by the District, and shall be filed with the unit member's supervisor and the appropriate manager five (5) days in advance of the intended leave (except in emergency situations), unless otherwise stated by the provisions of the specific leave.

  • Application for Leave Any request for a leave of absence shall be submitted in writing by the employee to the Employer or designee. The request shall state the reason the leave of absence is being requested and the length of time off the employee desires. Authorization for a leave of absence shall be furnished to the employee by the Employer or designee, and it shall be in writing.

  • New Application for Licensure Any time after the three-month period has lapsed from the Effective Date of this Agreement and Respondent has paid the Administrative Penalty set forth in Section III, Paragraph 1 of this Order, Respondent may apply for a new mortgage loan originator license or, as applicable, petition for the reinstatement of an MLO Activity Endorsement in any or all of the Participating States with the understanding that each State Mortgage Regulator reserves the rights to fully investigate such application for licensure or petition for reinstatement of an MLO Activity Endorsement and may either approve or deny such application or petition pursuant to the normal process for such licensing or endorsement investigations. No license application or petition described in this paragraph will be denied solely based on the facts, circumstances, or consensual resolution provided for in this Agreement. Respondent further agrees that Respondent must satisfy the Administrative Penalty provision prior to submitting an application for a new mortgage loan originator license or, as applicable, petition for the reinstatement of an MLO Activity Endorsement.