CONFORMITY OF PRODUCTION AND ROUTINE TESTS Clause Samples

The "Conformity of Production and Routine Tests" clause ensures that products manufactured in series consistently meet the agreed-upon specifications and quality standards. In practice, this clause requires the manufacturer to implement regular testing and inspection procedures during production to verify that each batch or unit conforms to the required criteria. For example, this may involve sampling finished products for quality checks or conducting specific performance tests before shipment. The core function of this clause is to maintain product reliability and compliance, thereby reducing the risk of defects and ensuring that customers receive goods that match contractual expectations.
CONFORMITY OF PRODUCTION AND ROUTINE TESTS. 10.1. The helmet or visor approved under this Regulation (whether the visor is approved as such or as forming part of the helmet), having satisfied the acceptability conditions of production qualification, shall be so manufactured as to conform to the type approved by complying with the requirements set out in paragraphs 6. and 7. 10.2. In order to verify that the conditions stated in paragraph 10.1. have been met, appropriate control of the production must be performed. 10.3. The holder of the approval is responsible for the conformity of production procedures and he must in particular: 10.3.1. Ensure the existence of effective procedures so that the quality of the products can be inspected; 10.3.2. Have access to the testing equipment needed to inspect the conformity of each approved type; 10.3.3. Ensure that the test results are recorded and that the annexed documents remain available for a time period of 10 years after test; 10.3.4. Analyse the results of each type of test in order to verify and ensure the stability of the helmet or visor characteristics, making allowances for the variations of industrial production; 10.3.5. Ensure that for each type of helmet or visor at least those tests prescribed in paragraphs 10.5. and 10.6. of the present Regulation are carried out; 10.3.6. Ensure that when any samples or test pieces show non-conformity with the standard test concerned, further samples are taken and tested. All the necessary steps must be taken to restore conformity of the corresponding production. 10.4. The authority which has granted the approval may at any time verify the conformity control methods applied in each production facility. 10.4.1. At every inspection, the test records and production progress records must be available to the visiting inspector. 10.4.2. The inspector may select samples at random to be tested in the manufacturer's test laboratory (in the case where the manufacturer has such a laboratory). The minimum number of samples may be determined according to the results of the manufacturer's own verification. 10.4.3. When the level of control appears unsatisfactory, or when it seems necessary to check the validity of the tests carried out in application of paragraph 10.4.2., the inspector must select samples which will be sent to the technical service which conducted the approval tests. 10.4.4. The relevant authorities may carry out all of the tests prescribed in the present Regulation. 10.4.5. The relevant authorities must con...
View SourceView Similar (4)
CONFORMITY OF PRODUCTION AND ROUTINE TESTS. The conformity of production procedures shall comply with those set out in the Agreement, (Schedule 1 E/ECE/TRANS/505/Rev.3), with the following requirements: 10.1. Suitable controls of the production shall be carried out. In this case, suitable controls mean checking the dimensions of the product as well as the existence of procedures for the effective control of the quality of products as to conform to the type approved by meeting the requirements set forth in paragraphs 7. to 8. above. 10.2. The competent authority which has granted the Type Approval may at any time verify the conformity control methods applicable to each production unit and carry out on samples any test deemed necessary among the tests carried out for the approval. The normal frequency of these verifications shall be once a year.
View SourceView Similar (2)
CONFORMITY OF PRODUCTION AND ROUTINE TESTS. 11.6.MODIFICATION AND EXTENSION OF APPROVAL OF A CHILD RESTAINT SYSTEM 12.7.PENALTIES FOR NON-CONFORMITY OF PRODUCTION 13.8.PRODUCTION DEFINITELY DISCONTINUED 14.9.INFORMATION FOR USERS 15.10.TRANSITIONAL PROVISIONS 16.11.NAMES AND ADDRESSES OF TECHNICAL SERVICES RESPONSIBLE FOR CONDUCTING APPROVAL TESTS, AND OF ADMINISTRATIVE DEPARTMENTS
View SourceView Similar (2)
CONFORMITY OF PRODUCTION AND ROUTINE TESTS. The conformity of production procedures shall comply with those set out in the Agreement, Appendix 2 (E/ECE/324-E/ECE/TRANS/505/Rev.2), with the following requirements: 12.1. Any child restraint system approved to this Regulation shall be so manufactured as to conform to the type approved by meeting the requirements set forth in paragraphs 6. to 8. above. 12.2. The minimum requirements for conformity of production control procedures set forth in Annex 16 to this Regulation shall be complied with. 12.3. The authority which has granted type approval may at any time verify the conformity control methods applied in each production facility. The normal frequency of these verifications shall be twice a year.
View Source

Related to CONFORMITY OF PRODUCTION AND ROUTINE TESTS

  • Conformity of production 8.1. Procedures concerning conformity of production shall comply with those set out in the 1958 Agreement, Schedule 1 (E/ECE/TRANS/505/Rev.3) and meet the following requirements: 8.2. A vehicle approved pursuant to this Regulation shall be so manufactured as to conform to the type approved by meeting the requirements of paragraph 5. above; 8.3. The Type Approval Authority which has granted approval may at any time verify the conformity of control methods applicable to each production unit. The normal frequency of such inspections shall be once every two years.

  • Inspection and Tests 3.8.1 The Procuring entity or its representative shall have the right to inspect and/or to test the goods to confirm their conformity to the Contract specifications. The Procuring entity shall notify the tenderer in writing in a timely manner, of the identity of any representatives retained for these purposes. 3.8.2 The inspections and tests may be conducted in the premises of the tenderer or its subcontractor(s), at point of delivery, and/or at the Goods’ final destination If conducted on the premises of the tenderer or its subcontractor(s), all reasonable facilities and assistance, including access to drawings and production data, shall be furnished to the inspectors at no charge to the Procuring entity. 3.8.3 Should any inspected or tested goods fail to conform to the Specifications, the Procuring entity may reject the equipment, and the tenderer shall either replace the rejected equipment or make alterations necessary to make specification requirements free of costs to the Procuring entity. 3.8.4 The Procuring entity’s right to inspect, test and where necessary, reject the goods after the Goods’ arrival shall in no way be limited or waived by reason of the equipment having previously been inspected, tested and passed by the Procuring entity or its representative prior to the equipment delivery. 3.8.5 Nothing in paragraph 3.8 shall in any way release the tenderer from any warranty or other obligations under this Contract.

  • Inspection and Testing Each Constructing Entity shall cause inspection and testing of the Interconnection Facilities that it constructs in accordance with the provisions of this section. The Construction Parties acknowledge and agree that inspection and testing of facilities may be undertaken as facilities are completed and need not await completion of all of the facilities that a Constructing Entity is building.

  • Inspections and Tests 26.1 The Supplier shall at its own expense and at no cost to the Procuring Entity carry out all such tests and/or inspections of the Goods and Related Services as are specified in the SCC. 26.2 The inspections and tests may be conducted on the premises of the Supplier or its Subcontractor, at point of delivery, and/or at the Goods' final destination, or in another place in Kenya as specified in the SCC. Subject to GCC Sub-Clause 26.3, if conducted on the premises of the Supplier or its Subcontractor, all reasonable facilities and assistance, including access to drawings and production data, shall be furnished to the inspectors at no charge to the Procuring Entity. 26.3 The Procuring Entity or its designated representative shall be entitled to attend the tests and/or inspections referred to in GCC Sub-Clause 26.2, provided that the Procuring Entity bear all of its own costs and expenses incurred in connection with such attendance including, but not limited to, all travelling and board and lodging expenses. 26.4 Whenever the Supplier is ready to carry out any such test and inspection, it shall give a reasonable advance notice, including the place and time, to the Procuring Entity. The Supplier shall obtain from any relevant third party or manufacturer any necessary permission or consent to enable the Procuring Entity or its designated representative to attend the test and/or inspection. 26.5 The Procuring Entity may require the Supplier to carry out any test and/or inspection not required by the Contract but deemed necessary to verify that the characteristics and performance of the Goods comply with the technical specifications codes and standards under the Contract, provided that the Supplier's reasonable costs and expenses incurred in the carrying out of such test and/or inspection shall be added to the Contract Price. Further, if such test and/or inspection impedes the progress of manufacturing and/or the Supplier's performance of its other obligations under the Contract, due allowance will be made in respect of the Delivery Dates and Completion Dates and the other obligations so affected. 26.6 The Supplier shall provide the Procuring Entity with a report of the results of any such test and/or inspection. 26.7 The Procuring Entity may reject any Goods or any part thereof that fail to pass any test and/or inspection or do not conform to the specifications. The Supplier shall either rectify or replace such rejected Goods or parts thereof or make alterations necessary to meet the specifications at no cost to the Procuring Entity, and shall repeat the test and/or inspection, at no cost to the Procuring Entity, upon giving a notice pursuant to GCC Sub- Clause 26.4. 26.8 The Supplier agrees that neither the execution of a test and/or inspection of the Goods or any part thereof, nor the attendance by the Procuring Entity or its representative, nor the issue of any report pursuant to GCC Sub-Clause 26.6, shall release the Supplier from any warranties or other obligations under the Contract.

  • Penalties for non-conformity of production 9.1. The approval granted in respect of a vehicle type pursuant to this Regulation may be withdrawn if the requirements set forth above are not met. 9.2. If a Contracting Party to the Agreement applying this Regulation withdraws an approval it has previously granted, it shall forthwith so notify the other Contracting Parties applying this Regulation, by means of a communication form conforming to the model in Annex 1 to this Regulation.