Quality of the Products Sample Clauses

Quality of the Products. The Company agrees that it will use its commercially reasonable, good faith efforts to maintain the high quality of all of Products delivered to Distributor.

Quality of the Products. 8.1. The Product(s) must be of a quality as specified in Appendix A. If the Prod- uct(s) do not fulfil the requirements of Appendix A or the warranty given by the Contractor, the Product(s) will be considered defective. 8.2. Furthermore, the Product(s) shall be deemed to have a defect if the Prod- uct(s) do not possess such properties or do not work in such a manner as Fødevarestyrelsen may reasonably expect on the basis of the content of the present Contract. 8.3. The Contractor warrants that the Product(s) delivered are in compliance with applicable mandatory rules.

Quality of the Products. 7.1 Piramal shall perform, or cause to be performed, the tests required to be performed by Piramal pursuant to the Specifications on each batch of Products manufactured pursuant to this Agreement before delivery to P▇▇▇▇▇▇, including, without limitation, release testing. 7.2 Each test report shall set forth the items tested, Specifications, and test results in a Certificate of Analysis for each batch of the Product delivered to P▇▇▇▇▇▇.

Quality of the Products. 1. Vesper has a best-efforts obligation to supply products to the customer that meet the in the confirmation notice specified specifications. 2. Customer hereby understands and accepts that all samples, drawings, models, figures, dimensions, weights or any other specifications for products are estimates only, and for demonstrative purposes, and although Vesper will use best efforts to ensure their accuracy, it cannot guarantee the absence of anomalies or that the quantity or quality of the products will not differ, unless it has been explicitly stated in writing. 3. The products sold by Vesper are derived from or are recyclable materials which means divergences in color, composition, moisture, hardness, vulcanization rate, ▇▇▇▇▇▇, tensile strength, packaging etc. will occur. The customer is aware that due to the nature of the products sold by Vesper these differences can and will occur. As a result, the customer cannot derive any rights and/or price reductions from these divergences. 4. The customer shall examine the products or cause them to be examined immediately on receipt. The customer shall notify Vesper in writing of any lack of conformity of the products, specifying the nature of the lack of conformity, within 2 business days after the customer has discovered or should have discovered the lack of conformity. 5. If the customer fails to notify Vesper in writing of any lack of conformity at the latest within a period of 7 days from the date on which the products were delivered, the products are deemed accepted and in accordance with customer's order, and Vesper will have no obligation to correct such shipments, unless customer bears all the expenses thereof. 6. In the case of any alleged shortage, errors, defects or non-conformance with the agreement, customer shall allow Vesper to inspect the products subject to the alleged defect and/or co-operate with any potential investigation by Vesper or by a third party engaged by ▇▇▇▇▇▇. If the customer has given due notice of non-conformity to Vesper and completed the claims form required by Vesper, and Vesper confirms the non-conformance with the agreement, a fitting solution will be found for all parties. Complaints regarding shipment or products do not allow the customer to suspend performance under the agreement, terminate the agreement, or make or request any deductions from payments due to Vesper. THE SOLE AND EXCLUSIVE REMEDY FOR ALLEGEDLY DEFECTIVE PRODUCTS IS THE REPLACEMENT OF SUCH PRODUCTS OR PAR...

Quality of the Products. 4.1 In entering into this contract, the Client relies on the Manufacturer’s expertise to manufacture the Goods, and the Manufacturer accordingly warrants to the Client that all goods under this contract shall: 4.1.1 Conform in all respects to the specifications in schedule 1; 4.1.2 For a period of [specify duration] from delivery, be of the quality required by the contract and free from defects in design, workmanship or materials; in case of delivery of defective or non- conforming goods, the Manufacturer shall remedy the defect or the non-conformity within 30 days after receipt of a written notice giving full particulars of the defect or the non-conformity and requiring it to be remedied. If the defect or the non-conformity amounts to a material breach of any of the provisions of this contract and the Manufacturer fails to remedy the breach within 30 days after receipt of the aforesaid written notice, the Client shall be entitled to terminate this contract in conformity with Article 7.2.1. 4.1.3 Comply with all standards and applicable statutes and regulations relating to the Goods [specify type of standards/statutes/ regulations – delete sub-Article if not applicable]. 4.2 [Only if samples are to be submitted to the Client] Subject to Article 1.6, the Client may reject any of the Goods that do not comply with Article 4.1. 4.3 For the purposes of assuring to the Client the quality of the Goods required under this contract the Manufacturer shall permit the duly authorized representative of the Client, at any time during normal working hours and on reasonable notice, to inspect any premises of the Manufacturer or any third party where any of the Goods, or any labelling or packaging for them, are manufactured or stored by or for the Manufacturer. 4.4 If any claim is made against the Client arising out of or in connection with the manufacture of or any defect in the Goods, the Manufacturer shall, except to the extent that the claim is due to any defect in the specification made by the Client or the technology or the equipment provided by the Client, indemnify the Client against all damages or other compensation awarded against the Client in connection with the claim or paid or agreed to be paid by the Client in settlement of the claim and all legal or other expenses incurred by the Client in or about the defence or settlement of the claim. The Client shall notify the Manufacturer as soon as practicable after becoming aware of the claim, and take all action re...

Quality of the Products. The Company agrees that it will use its commercially reasonable, good faith efforts to maintain the high quality of all of Products delivered to Distributor. NOTE: 제품의 특성에 따라 공급자는 판매권자에게 품질관리의무를 부여하도록 할 수 있습니다. 특히 식품가공품과 같은 경우 그 청결도나 유통기한의 관리 등은 궁극적으로 공급자의 브랜드가치에도 큰 영향을 끼치게 되는 것이므로 엄격한 관리의무의 부여가 필요합니다. 공급하는 물품의 특성에 맞추어 적절한 수준의 규정이 필요할 것입니다.

Quality of the Products. Inspection and Rejection; -------------------------------------------------- Replacement Product. Without prejudice to AMD Inc.'s obligation to make payment ------------------- for Products Onshipped pursuant to Section 3.05: (a) AMD Holding shall use, and shall cause AMD Saxonia to use, all reasonable efforts to ensure that each Product Onshipped meets the Specifications for that Product. In order to assist AMD Holding in such efforts and for the purpose of assuring to AMD Inc. the quality of the Products required under this Agreement, AMD Holding shall permit the duly authorized representatives of AMD Inc., at any time during normal working hours and on reasonable notice, to inspect any premises of AMD Holding, and shall use all reasonable efforts to permit such representatives, at such time and on such notice, to inspect any premises of any third party where any of the Products, or any labeling or packaging for them, are stored by or for AMD Holding. In addition, AMD Holding shall cause AMD Saxonia to permit the duly authorized representatives of AMD Inc., at any time during normal working hours and on reasonable notice, to inspect any premises of AMD Saxonia, and shall cause AMD Saxonia to use all reasonable efforts to permit such representatives, at such time and on such notice, to inspect any premises of any third party where any of the Products, or any labeling or packaging for them, are manufactured or stored by or for AMD Saxonia. (b) AMD Inc. shall promptly notify AMD Holding and AMD Saxonia in writing should the quality of the Products Onshipped vary materially from the typical quality of the four previous shipments or, in the case of the first four shipments, from that quality of the previous shipments. In such event, AMD Holding shall use, and shall cause AMD Saxonia to use, its reasonable commercial efforts to restore the quality of the Products delivered hereunder to again meet such typical quality as soon as possible.

Quality of the Products. Swisspearl shall be responsible for the quality and other features of the products only in accordance with the information provided in the agreement between the Parties or information explicitly provided by Swisspearl in writing for an individual purchase.

Quality of the Products. 4.3.1. R.H. shall maintain quality assurance standards in accordance with ISO9002. R.H. suppliers’ Quality Assurance, and its Control and Inspection processes shall be in full compliance with ISO9002 standards during the term of this Agreement. 4.3.2. The Products shall be manufactured to meet the following manufacturing standards requirements: 4.3.2.1. IPC610. 4.3.3. R.H. will coordinate, participate and cooperate with on-going quarterly inspections as required by UL for Allot’s Products. 4.3.4. R.H. shall permit Allot to audit its quality process, upon five (5) days advance notice to R.H., and shall provide such assistance which is reasonably necessary for Allot to evaluate the quality of the Products and the manufacturing process. 4.3.5. R.H. shall inform Allot of any violation or change of the production and/or testing procedure within one (1) working day of their occurrence.