Design for Dismantling for Recycling and Recovery Clause Samples

Design for Dismantling for Recycling and Recovery. 7.3.1. OEM Signatories shall ensure that joining, fastening or sealing techniques do not prevent access to the following components (when present) in a non-destructive extraction method, and that the extraction method can be carried out using non- proprietary and Commonly Available Tools: a) Batteries b) Printed circuit boards greater than 10 cm² c) Ink and toner Cartridges and Containers d) Plastic containing brominated flame retardants e) Liquid crystal displays greater than 100 cm² f) External electric cables g) Electrolyte capacitors containing substances of concern (height > 25 mm, diameter > 25 mm or proportionately similar volume) 7.3.2. Accessing such components shall be facilitated by OEM Signatories documenting the sequence of dismantling operations needed to access the targeted components, i.e. each of these operations, the type and the number of joining, fastening and sealing techniques(s) to be unlocked, and tool(s) required. Dismantling instructions will be made available to third parties upon request. Manufacturers may use the ▇▇▇▇://▇▇▇.▇▇▇-▇▇▇▇▇▇▇▇.▇▇ to meet their information sharing requirements. 7.3.3. These requirements shall not apply: a) to the extent that non-removable joining, fastening or sealing techniques are necessary to ensure the safety of the Product concerned or its relevant components; or b) to the extent that such requirements are exempted by specific provisions of other Community law applicable to the Products or components concerned. 7.3.4. Products will be deemed to comply with the requirements of paragraph 7.3 if they hold a relevant GEN member Type Eco Label.
View SourceView Similar (2)

Related to Design for Dismantling for Recycling and Recovery

  • CONTRACTOR NAME CHANGE An amendment is required to change the Contractor's name as listed on this Agreement. Upon receipt of legal documentation of the name change the State will process the amendment. Payment of invoices presented with a new name cannot be paid prior to approval of said amendment.

  • Removal of General Partner (a) Upon the occurrence of an Event of Bankruptcy as to, or the dissolution of, the General Partner, the General Partner shall be deemed to be removed automatically; provided, however, that if the General Partner is on the date of such occurrence a partnership, the withdrawal, death, dissolution, Event of Bankruptcy as to or removal of a partner in such partnership shall be deemed not to be a dissolution of the General Partner if the business of the General Partner is continued by the remaining partner or partners. The Limited Partners may not remove the General Partner, with or without cause. (b) If the General Partner has been removed pursuant to this Section 7.04 and the Partnership is continued pursuant to Section 7.03, the General Partner shall promptly transfer and assign its General Partnership Interest in the Partnership to the substitute General Partner approved by a Majority in Interest in accordance with Section 7.03(b) and otherwise be admitted to the Partnership in accordance with Section 7.02. At the time of assignment, the removed General Partner shall be entitled to receive from the substitute General Partner the fair market value of the General Partnership Interest of such removed General Partner as reduced by any damages caused to the Partnership by such General Partner. Such fair market value shall be determined by an appraiser mutually agreed upon by the General Partner and a Majority in Interest (excluding the General Partner and any Subsidiary of the General Partner) within ten days following the removal of the General Partner. In the event that the parties are unable to agree upon an appraiser, the removed General Partner and a Majority in Interest (excluding the General Partner and any Subsidiary of the General Partner) each shall select an appraiser. Each such appraiser shall complete an appraisal of the fair market value of the removed General Partner’s General Partnership Interest within 30 days of the General Partner’s removal, and the fair market value of the removed General Partner’s General Partnership Interest shall be the average of the two appraisals; provided, however, that if the higher appraisal exceeds the lower appraisal by more than 20% of the amount of the lower appraisal, the two appraisers, no later than 40 days after the removal of the General Partner, shall select a third appraiser who shall complete an appraisal of the fair market value of the removed General Partner’s General Partnership Interest no later than 60 days after the removal of the General Partner. In such case, the fair market value of the removed General Partner’s General Partnership Interest shall be the average of the two appraisals closest in value. (c) The General Partnership Interest of a removed General Partner, during the time after default until transfer under Section 7.04(b), shall be converted to that of a special Limited Partner; provided, however, such removed General Partner shall not have any rights to participate in the management and affairs of the Partnership, and shall not be entitled to any portion of the income, expense, profit, gain or loss allocations or cash distributions allocable or payable, as the case may be, to the Limited Partners. Instead, such removed General Partner shall receive and be entitled only to retain distributions or allocations of such items that it would have been entitled to receive in its capacity as General Partner, until the transfer is effective pursuant to Section 7.04(b). (d) All Partners shall have given and hereby do give such consents, shall take such actions and shall execute such documents as shall be legally necessary and sufficient to effect all the foregoing provisions of this Section 7.04.

  • Contract Monitoring The criminal background checks required by this rule shall be national in scope, and must be conducted at least once every three (3) years. Contractor shall make the criminal background checks required by Paragraph IV.G.1 available for inspection and copying by DRS personnel upon request of DRS.

  • Prohibition of City Funding for Purchase of Single Serving Bottled Water The City’s policy is that City funds should not be used for the purchase of single-serving bottled water except for any of the following: • Public safety emergencies, investigations and extended deployments or activation of the Office of Emergency Services; • Situations where there is a high risk of cross-contamination with non-potable water; or • Situations where there are no reasonable alternatives to bottled water, such as large public events and when large quantities of water need to be distributed for health and safety reasons. An invoice seeking reimbursement from City for the cost of single-serving bottled water under one of the above exceptions must be accompanied by a waiver form provided by the City and signed by the Director.

  • Procurement of Small Works Works estimated to cost less than $30,000 equivalent per contract, up to an aggregate amount not to exceed $500,000 equivalent, may be procured under lump-sum, fixed-price contracts awarded on the basis of quotations obtained from three (3) qualified domestic contractors in response to a written invitation. The invitation shall include a detailed description of the works, including basic specifications, the required completion date, a basic form of agreement acceptable to the Bank, and relevant drawings, where applicable. The award shall be made to the contractor who offers the lowest price quotation for the required work, and who has the experience and resources to complete the contract successfully. Part D: Review by the Bank of Procurement Decisions