Installation and Activation Sample Clauses

The Installation and Activation clause defines the responsibilities and procedures for setting up and enabling a product, service, or system. It typically outlines the steps required for delivery, physical installation, configuration, and the criteria for confirming that the product is operational and ready for use. For example, it may specify timelines for installation, the party responsible for performing the work, and the process for verifying successful activation. This clause ensures that both parties have a clear understanding of when and how the product or service becomes functional, thereby reducing disputes and setting expectations for project completion.
Installation and Activation. If you have not already done so, you can download the installer for the Software by visiting ▇▇▇▇://▇▇▇▇▇▇▇▇▇▇.▇▇▇▇▇▇.▇▇▇/. You must install the Software onto a clean server with a fresh installation of the operating system. After installing the Software, you must complete the Mandatory Activation Process as set forth in the EULA. If you should have any questions regarding the installation or if you would like our Technical Analysts to perform the installation for you, please submit a support request by going to ▇▇▇▇://▇▇▇.▇▇▇▇▇▇.▇▇▇/support/support.htm and our analysts can provide further assistance. You must also designate a static public IP address to be used in connection with this Agreement. If you wish to change the IP address associated with this Agreement, you will need to login to your direct license account at ▇▇▇▇▇://▇▇▇▇▇.▇▇▇▇▇▇.▇▇▇/my/licenses and update the licensed IP address. If you fail to follow the installation and activation instructions (or other such instructions provided to you by cPanel from time to time), cPanel may terminate this Agreement and the ▇▇▇▇ or suspend or disable access to the Software. Please refer to the ▇▇▇▇ for additional details.
View SourceView Similar (2)
Installation and Activation. The Services require professional installation. A standard professional installation and activation are provided for a set fee, as set out in a Agreement. Standard professional installation includes an antenna, which is mounted on the external surface of a building using a stock mount (no higher than 15 feet), and up to 30 feet of antenna cable. Standard professional installation includes travel to and from a Site, which may be up to 150km from a POP. Rogers will advise you if your location is outside of the standard installation range of 150km. Professional installation requirements beyond the standard installation are subject to additional fees. Any additional fees will be quoted and accepted by you prior to Rogers proceeding with any such non-standard installation.
View SourceView Similar (2)
Installation and Activation. 5.1 The Customer shall be solely responsible for installation of the Sensor and / or Other Products and shall install the Sensor and / or Other Products in accordance with the User Guide. AbiBird is not responsible for any incorrect or improper installation. 5.2 Once the Sensor and / or Other Products are properly installed the Customer shall connect the Sensor and / or Other Products to the Smart Device App using an acceptable device with the Smart Device App properly downloaded and installed and shall activate the Sensor and / or Other Products in accordance with the User Guide. 5.3 As soon as reasonably possible after Delivery of the Sensor and / or Other Products, the Customer shall inspect the Sensor and / or Other Products and shall satisfy itself that: (a) it has received the Sensor and / or Other Products in good condition in the quantity ordered; (b) it, and any person installing and activating the Sensor and / or Other Products and the Smart Device App, has read the User Guide and fully understands its proper use and the means of installation and removal; and (c) the Service is in working order. 5.4 If the Customer is not satisfied with the matters in clause 5.3 and provided that it has otherwise complied with this clause 5, it shall contact AbiBird. AbiBird shall use its best endeavours to resolve any issues with the Service. The means by which AbiBird resolves any issues with the Service (including conducting any repairs or arranging a replacement Sensor and / or Other Products) shall be within its discretion.
View Source
Installation and Activation. For each User License granted under this SLA, Licensee may install and activate one (1) copy of the Licensed Software on a single computer for use by a single User. Upon receipt by ▇▇▇▇▇ of a completed, executed SLA, Nitro shall promptly provide to Licensee an activation code to activate the Licensed Software. Licensee shall take reasonable precautions to ensure that the activation code is kept confidential and Licensee shall immediately notify Nitro in writing if it believes that an activation code has been disclosed to any other person or entity. Licensee shall be solely responsible for all expenses incurred in connection with Licensee’s installation and activation of the Licensed Software.
View Source
Installation and Activation. 6.1 For the installation and activation of our Services we will endeavour to: 6.1.1 Provide the Service to you by the date set by us. However, unless we inform you otherwise such dates are best estimates only; 6.1.2 install the Software, Device and/or Dhiraagu Equipment in any specific location requested by you. If for technical and other reasons, we are unable to install at the requested location we may decide on alternative locations based on our requirements; and 6.1.3 minimise any disturbance to you when carrying out any work at the Premises. 6.2 If any direct physical damage to the Premises is caused due to our or our Contractor’s negligence, we agree to make good to you such damages as is reasonable. 6.3 We may provide special installation services to you if we are required to expand our Network. 6.4 Notwithstanding clause 6.1.1, we may at your request, agree to provide you with special or express installation and/or activation services. The Charges for any such services will either be set out in our Prices or can be obtained through a quotation from us. 6.5 You agree to supply at your own cost, suitable facilities necessary for installation and activation of the Services, including but not limited to a suitable environment, a secure electricity supply and all necessary electrical and any other installations and fittings, including concealed internal wiring if required. 6.6 Depending on the Service, you may be required to sign a service acceptance form upon completion of the installation process signifying that the Service, Device and/or Dhiraagu Equipment has been installed and/or activated, tested and is fully functional.
View Source
Installation and Activation. 6.1 You must be the rightful owner of the property at the Address at which the FetchTV Service is installed or you must have obtained installation approval from the rightful owner of the property. 6.2 Instructions on how to self-install the FetchTV Equipment at your Address are set out in the Quick Start Guide which you will receive at the same time as the FetchTV Equipment. If you encounter any problems installing the FetchTV Equipment, please refer to the Quick Start Guide or, if possible, to the troubleshooting guide onscreen. If you are still experiencing difficulties, you can contact us on 133 061. 6.3 Instructions on how to install the PLC are set out in the Quick Install Guide, available from your customer service agent or tech support, which you can contact on 133 061. 6.4 After installing the FetchTV Equipment you will be prompted to Activate the FetchTV Service by inputting the activation code (provided to your installer or to you, as part of the self install kit) and then following the On-Screen instructions. You must Activate your FetchTV Service before it will work. 6.5 Upon Activation, we will perform a diagnostic test. We record the result of that diagnostic test for the purpose of providing you with technical support. 6.6 If you do not activate the FetchTV Service within 25 days from the date we accept your Application, we will deem the FetchTV Service to be Activated in accordance with condition 24.1 and will commence delivering and charging you for the FetchTV Service from the 26th day onward.
View Source
Installation and Activation. 6.1 In the event the Subscriber needs installation, the Subscriber should call the Helpline No. 39407575 or the Toll Free No.1800 200 7575 (subject to change) in order to schedule the Installation. Installations will take place at a mutually convenient time and Sun Direct through authorized Distributor /Dealer will make reasonable efforts to arrange for an Engineer to perform any Installation on the time and date requested by the Subscriber.
View Source
Installation and Activation. 5.1. The Software Subscription is licensed for local installation on the customer’s device. 5.2. To activate the Software Subscription, the user must enter a license key provided by Tab- ular Editor, which will be uniquely associated with the user’s email address. The license key will be issued to the customer upon completion of the ordering process, regardless of the chosen payment method.
View Source
Installation and Activation. All new Xpress Wireless Internet accounts will be charged a $99.00 Installation Fee and a $35.00 Activation Fee on their first bill.
View Source

Related to Installation and Activation

  • Installation and Use You may install and use the Software only for the number of licenses acquired by you. In order to exercise your rights to the Software under this Agreement, you must activate your copy of the Software in the manner described during the launch sequence.

  • Inspection and Access Landlord and its agents, representatives, and contractors may enter the Premises at any reasonable time to inspect the Premises and to make such repairs as may be required or permitted pursuant to this Lease and for any other business purpose. Landlord and Landlord’s representatives may enter the Premises during business hours on not less than 48 hours advance written notice (except in the case of emergencies in which case no such notice shall be required and such entry may be at any time) for the purpose of effecting any such repairs, inspecting the Premises, showing the Premises to prospective purchasers and, during the last year of the Term, to prospective tenants or for any other business purpose. Landlord may erect a suitable sign on the Premises stating the Premises are available to let or that the Project is available for sale. Landlord may grant easements, make public dedications, designate Common Areas and create restrictions on or about the Premises, provided that no such easement, dedication, designation or restriction materially, adversely affects Tenant’s use or occupancy of the Premises for the Permitted Use. At Landlord’s request, Tenant shall execute such instruments as may be necessary for such easements, dedications or restrictions. Tenant shall at all times, except in the case of emergencies, have the right to escort Landlord or its agents, representatives, contractors or guests while the same are in the Premises, provided such escort does not materially and adversely affect Landlord’s access rights hereunder.

  • Cooperation and Access The Cooperative Member agrees that it will cooperate in compliance with any reasonable requests for information and/or records made by the Cooperative. The Cooperative reserves the right to audit the relevant records of any Cooperative Member. Any breach of this provision shall be considered material and shall make the Agreement subject to termination on ten (10) days written notice to the Cooperative Member.

  • Installation and Maintenance Except for the bi‐directional and production metering equipment owned by the City, all equipment on Customer’s side of the delivery point, including the required disconnect device, shall be provided and maintained in satisfactory operating condition by Customer and shall remain the property and responsibility of the Customer. The City will bear no responsibility for the installation or maintenance of Customer’s equipment or for any damage to property as a result of any failure or malfunction thereof. The City shall not be liable, directly or indirectly for permitting or continuing to allow the interconnection of the Facility or for the acts or omissions of Customer or the failure or malfunction of any equipment of Customer that causes loss or injury, including death, to any party.

  • Installation and Conversion State Street and the Fund shall be responsible for the technical installation and conversion (“Installation and Conversion”) of the Designated Configuration. The Fund shall have the following responsibilities in connection with Installation and Conversion of the System: (i) The Fund shall be solely responsible for the timely acquisition and maintenance of the hardware and software that attach to the Designated Configuration in order to use the Data Access Services at the Designated Locations, and (ii) State Street and the Fund each agree that they will assign qualified personnel to actively participate during the Installation and Conversion phase of the System implementation to enable both parties to perform their respective obligations under this Addendum.