Layout of the Work Clause Samples

Layout of the Work. The Licensee shall employ, at its own expense, a California-registered civil engineer or California- licensed land surveyor to layout the Work of the Project and establish reference points and elevations required for the construction. Reference points for the construction shall be set in accordance with layout control points identified in the Request for Proposal. On projects with new foundations (for buildings, site improvements, bridges, light poles, others), the Licensee shall prepare a survey illustrating dimensions, locations, angles and elevations of the construction associated with the new foundation, and shall show the as-built location of the construction on the Project Site Boundary drawing provided by the Trustees. The Licensee shall specify the horizontal location using California Coordinate System, NAD 83 Coordinates. A California-licensed land surveyor shall certify the survey with its stamp and signature, after which the Licensee shall submit it promptly to the Trustees. The Licensee shall prepare surveys and design for excavations and shorings, where required, for the Project. The Trustees have the right, but not the obligation, to check the location and elevation of such stakes and reference points and/or to check Work constructed from such stakes or reference points. Work that is not correctly located shall be rejected. The Licensee shall provide to the Trustees the record survey and a copy of the closure data of the layout of the Project showing the ties to the University layout control points. The information shall be provided in the form of a CD-ROM containing “PDF” and “CAD” files of the same.
Layout of the Work. A. Unless otherwise specified herein, Contractor shall set, cut and lay out the Work as necessary and shall furnish all stakes, templates, platforms, equipment and labor that may be required in performing the Work. All stakes or other marks shall be preserved by Contractor until removal is authorized by Owner. Owner shall furnish, on request from Contractor, all location and limit marks reasonably necessary per the Specifications for the conduct of the Work. B. Basic elevations and controlling location reference points, as may be designated in the drawings or Specifications, shall be established by Contractor. In addition, Contractor shall provide all survey work required for execution of the Work. Contractor shall be responsible for the accuracy of such intermediate lines and grades which shall be subject to check, from time to time, by Owner. Failure to check shall not relieve Contractor of responsibility for the accuracy of all lines and grades. Dimensions shown on the drawings or specifications are to be verified in the field by Contractor.
Layout of the Work. The Contractor shall be responsible for the location and layout of all work, and shall be responsible for all field measurements and elevations that may be required for execution of the work to the exact position and
Layout of the Work. Delete clause 3.6.1 in its entirety, and replace with the following:

Related to Layout of the Work

  • Cost of the Work The sum of all allowable costs necessarily incurred and paid by Contractor in the proper performance of the Work.

  • SCOPE OF THE WORK The Contractor shall furnish all the materials, perform all of the Work, and do all things required by the Contract Documents.

  • Completion of the Work The Contractor must obtain Material Completion as defined in Section 6.1.2 below prior to any occupancy of the Project.

  • THE WORK The Work comprises the completed construction required by the Contract Documents and includes all labor necessary to produce such construction, and all materials and equipment incorporated or to be incorporated in such construction.

  • Performance of the Work The Contractor shall perform all of the Work required for the complete and prompt execution of everything described or shown in, or reasonably implied from the Contract Documents for the above referenced Project.