MARKING AND PACKAGING Clause Samples

The Marking and Packaging clause sets out the requirements for how goods must be labeled and packaged before delivery. It typically specifies standards for packaging materials, labeling information such as product codes or handling instructions, and may require compliance with certain industry or regulatory guidelines. By clearly defining these expectations, the clause helps ensure that products arrive safely, are easily identifiable, and meet both contractual and legal obligations, thereby reducing the risk of damage, loss, or confusion during shipping and handling.
MARKING AND PACKAGING. 9.1. The Seller warrants that it complies with the provisions of Regulation EC No. 765/2008, Decision No. 768/2008/EC and the harmonised EN 50581 standard for all sales of its Products, including the manufacturer’s obligation to provide a declaration of conformity. Proof of conformity will be made available to the Buyer at its request, in the form of technical documents. 9.2. The Seller warrants that it complies with the essential requirements of Dutch legislation and regulations, EU directives and regulations and the standards applicable to the Products. 9.3. The prices set out in the proposal include ordinary packaging in accordance with the Seller’s standard practice. If the Buyer wishes to use a different type of packaging from the packaging normally used by the Seller, an extra packaging fee will be charged. The Seller does not take back packaging, in any circumstances whatsoever.
View SourceView Similar (4)
MARKING AND PACKAGING. 9.1. The Seller warrants that it complies with the provisions of Regulation EC No. 765/2008, Decision No. 768/2008/EC and the harmonised EN 50581 standard, and/or the equivalent requirements imposed by UK law as applicable, for all sales of its Products, including the manufacturer’s obligation to provide a declaration of conformity. Proof of conformity will be made available to the Buyer at its request, in the form of technical documents. 9.2. The Seller warrants that it complies with the essential requirements of the United Kingdom legislation and regulations, EU directives and regulations and the standards applicable to the Products. 9.3. The prices set out in the proposal include ordinary packaging in accordance with the Seller’s standard practice. If the Buyer wishes to use a different type of packaging from the packaging normally used by the Seller, an extra packaging fee will be charged. The Seller does not take back packaging, in any circumstances whatsoever.
View SourceView Similar (3)
MARKING AND PACKAGING. QUALCOMM shall package the Product in bulk for safe arrival to Customer using QUALCOMM’s standard procedures and best commercial practices. Customer will provide QUALCOMM, in advance of shipment, any special markings required on packaging and/or shipping documents.
View SourceView Similar (2)
MARKING AND PACKAGING. 9.1. The Seller warrants that it complies with the provisions of Regulation EC No. 765/2008, Decision No. 768/2008/EC and the harmonised EN 50581 standard for all sales of its Products, including the manufacturer’s obligation to provide a declaration of conformity. Proof of conformity will be made available to the Buyer at its request, in the form of technical documents. 9.2. The Seller warrants that it will comply with the essential requirements and provisions set forth by the laws of the Federal Republic of Germany and the German standards applicable to the Products as well as the EU directives and regulations. 9.3. The prices set out in the proposal include ordinary packaging in accordance with the Seller’s standard practice. If the Buyer wishes to use a different type of packaging from the packaging normally used by the Seller, an extra packaging fee will be charged.
View SourceView Similar (2)
MARKING AND PACKAGING. 9.1. The prices set out in the proposal include ordinary packaging in accordance with Neways’ standard practice. If the Customer wishes to use a different type of packaging from the packaging normally used by Neways, an extra packaging fee will be charged. Neways does not take back packaging, in any circumstances whatsoever.
View SourceView Similar (2)
MARKING AND PACKAGING. 9.1. The Seller warrants that it complies with the provisions of Regulation EC No. 765/2008, Decision No. 768/2008/EC and the harmonised EN 50581 standard, and/or the equivalent requirements imposed by UK law as applicable, 9.2. The Seller warrants that it complies with the essential requirements of the United Kingdom legislation and regulations, EU directives and regulations and the standards applicable to the Products. 9.3. The prices set out in the proposal include ordinary packaging in accordance with the Seller’s standard practice. If the Buyer wishes to use a different type of packaging from the packaging normally used by the Seller, an extra packaging fee will be charged. The Seller does not take back packaging, in any circumstances whatsoever.
View SourceView Similar (2)
MARKING AND PACKAGING. A. Sensor chamber covers will be engraved with artwork shown below. Art will be monochromatic (inverted color from artwork shown below) and will provide for contrast against black anodized aluminum substrate cover. B. Sensor substrates will be labeled with unique serial numbers. C. Sensors will be packaged in bulk with labels indicating a description of contents. Packaging will provide for sufficient protection of sensors during shipping and handling
View Source
MARKING AND PACKAGING. 9.1. The Seller warrants that it complies with the provisions of Regulation EC No. 765/2008, Decision No. 768/2008/EC and the harmonised EN 50581 (in Switzerland: Product Saftey Law, PrSG) standard for all sales of its Products, including the manufacturer’s obligation to provide a declaration of conformity. Proof of conformity will be made available to the Buyer at its request, in the form of technical documents. 9.2. The Seller warrants that it will comply with the essential requirements and provisions set forth by the laws of Switzerland and the Swiss standards applicable to the Products as well as the EU directives and regulations. 9.3. The prices set out in the proposal include ordinary packaging in accordance with the Seller’s standard practice. If the Buyer wishes to use a different type of packaging from the packaging normally used by the Seller, an extra packaging fee will be charged.
View Source
MARKING AND PACKAGING. QTI shall package the Product in bulk for safe arrival to Customer using QTI’s standard procedures and best commercial practices. Customer will provide QTI, in advance of shipment, any special markings required on packaging and/or shipping documents.
View Source

Related to MARKING AND PACKAGING

  • Packing and Marking By supplier

  • Packaging and Labeling Seller shall properly ▇▇▇▇, ▇▇▇▇, and ship Goods and provide Buyer with shipment documentation showing the Order number, Seller’s identification number for the subject Goods, the quantity of goods in shipment and the number of cartons or containers in the shipment.

  • PACKING AND SHIPPING a. Seller shall pack Goods to prevent damage and deterioration. Unless otherwise set forth in this Contract, Seller shall package Goods in accordance with the requirements of Boeing Document D37522-6 “Supplier Packaging.” Buyer may charge Seller for damage to or deterioration of any Goods resulting from improper packing or packaging. b. If this Contract specifies FOB destination (place of delivery), then in addition to any other shipping instructions, Seller shall forward Goods freight prepaid. Seller shall make the transportation arrangements, pay the shipping costs, and remain responsible for Goods until Goods are delivered and Buyer takes possession at the destination. c. If this Contract specifies FOB origin (place of shipment), then in addition to any other shipping instructions, Seller shall forward Goods collect. For Goods shipped within the United States, Seller shall make no declaration concerning the value of Goods shipped except on Goods where the tariff rating is dependent upon released or declared value. In such event, Seller shall release or declare such value at the maximum value within the lowest rating. Seller shall ship Goods in accordance with the Boeing Global Routing Guide found at ▇▇▇▇▇://▇▇▇.▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇.▇▇▇/logistics.html. Upon Buyer’s request, Seller shall identify packaging charges showing material and labor costs for container fabrication. d. Seller shall provide with each container shipped under this Contract an Advanced Shipping Notice (“ASN”). For each container shipped, Seller shall provide two (2) readable copies of the ASN barcode as follows: one (1) copy is to be securely affixed to the outside of each container and one (1) copy is to be loose inside each container. Non-conforming shipments are subject to rejection and repackaging at Seller’s expense. Instructions and guidelines related to the ASN process can be found on the Boeing Supplier Portal. Seller shall access by selecting the “Enterprise ASN Instructions” hyper-link under the header “Exostar Resources.” A copy of these instructions can also be found at ▇▇▇▇▇://▇▇▇.▇▇▇▇▇▇▇.▇▇▇/.

  • Packaging and Shipping All shipping containers shall be packed and packaged to: (i) ensure safe arrival to final destination; (ii) secure the lowest transportation costs;(iii) comply with requirements of common carriers; (iv) meet Buyer's written instructions; and (v) meet the requirements of all applicable laws, ordinances, rules and regulations.

  • PACKING AND SHIPMENT Deliveries shall be made as specified without charge for boxing, carting, or storage, unless otherwise specified. Articles shall be suitably packed to secure lowest transportation cost and to conform to the requirements of common carriers and any applicable specifications. Order numbers and symbols must be plainly marked on all invoices, packages, bills of lading, and shipping orders. Bill of lading should accompany each invoice. Count or weight shall be final and conclusive on shipments not accompanied by packing lists.