Minor defect Sample Clauses

POPULAR SAMPLE Copied 2 times
Minor defect. A minor defect is a defect that is not likely to reduce materially the usability of the unit of product for its intended purpose, or is a departure from established standards having little bearing on the effective use of operation of the unit. Age of Ingredients: Contractors formulating and producing end-item operational rations food items, and for each item that is manufactured, shall maintain a list of ingredients (generic name, brand name, producer name, or supplier name in case of bulk packed plant or animal ingredients, country of origin) and the time and temperature serviceability limitations the contractor will impose on each ingredient. Each ingredient’s time limitation is to be calculable using its date of pack as the starting point. A copy of this list will be made available to the Contracting Officer or to the USDA upon either's request. This paragraph does not modify time and/or temperature limitations specified for ingredients elsewhere in this solicitation/contract, including its technical data package and product specifications. INGREDIENTS FROM FOREIGN SOURCES: When ingredients are from a foreign country, the contractor shall have that ingredient listed on their “Master List of Ingredients from Foreign Sources”. For each ingredient, the Master List shall list the ingredient, the country of origin, and the product(s) in which the ingredient is used. The Master List shall be updated as necessary. The Master List shall be provided to the in-plant GQAR and, upon request, to DLA Troop Support Contracting Officer.” RATIONS NATIONAL CONTRACT (RNC) DELIVERIES AND USDA/USDC CERTIFICATION: All deliveries of USDA/USDC inspected Rations National Contract (RNC) product shall be USDA/USDC certified. Original USDA/USDC certificates shall accompany each delivery; however, assembler’s may receive deliveries accompanied by facsimiles (faxes, scans, etc.) as preliminary evidence of certification. RNC product that requires USDA/USDC certification shall not be accepted without the appropriate original USDA/USDC certification.” J.
View Source
Minor defect. A Minor Defect is a defect that is not likely to reduce the usability of CP for its intended purpose, or is a deviation from established standards according ANNEX 1 CONTRACTUAL PRODUCTS and ANNEX 2 DOCUMENTATION, having minor influence on the effective use, operation of CP or appearance.
View Source
Minor defect. A minor defect shall exist if use of the application is possible without restriction or with minor restrictions.
View SourceView Similar (2)
Minor defect any defect not classified as a major defect.
View SourceView Similar (2)
Minor defect. Minor defects are definitely objectionable but will not cause failure of the container to fulfill its intended purposes. Minor defects are not serious but may affect the appearance of the ends and may result in unacceptability by the consumer.
View Source
Minor defect. When Licensee reports a Minor Defect to MicroPact using the MicroPact hotline, MicroPact shall within a commercially reasonable time initiate efforts to (i) recreate and correct such minor defect within a reasonable time and (ii) suggest solutions to avoid and minimize the impact of the minor defect on the operation of the Licensed Software until the minor defect is corrected. For purposes of this Agreement, a minor defect means that some of the Licensed Software functionality is rendered inoperable, or most or all of the Licensed Software functionality is substantially reduced in effectiveness or throughput.
View Source
Minor defect. A minor failure does not prevent the vehicle from continuing in revenue service, but local policy prevents that. Examples of a minor defect include: i. Minor lighting deficiencies; and ii. Other minor electrical deficiencies.
View Source
Minor defect. Minor defect is a defect, other than Major, that is not likely to result in failure, but "down grades" the product in terms of the intended end use or application. 4.4 "Defect" and "Defective" - Definition and application to sampling plans shall be per ANSI/ASQC Z1.4-1993. Accept/Reject criteria shall be per "Defective" definition.
View Source
Minor defect. A minor defect is a defect that is not likely to reduce materially the usability of the unit of product for its intended purpose, or is a departure from established standards having little bearing on the effective use of operation of the unit. AGE OF INGREDIENTS: Contractors formulating and producing end-item operational rations food items, and for each item that is manufactured, shall maintain a list of ingredients (generic name, brand name, producer name, supplier name, or in case of bulk packed plant or animal ingredients, country of origin) and the time and temperature serviceability limitations the contractor will impose on each ingredient. Each ingredient’s time limitation is to be calculable using its date of pack as the starting point. A copy of this list will be made available to the Contracting Officer upon request. This paragraph does not modify time and/or temperature limitations specified for ingredients elsewhere in this solicitation/contract, including its technical data package and product specifications. INGREDIENTS FROM FOREIGN SOURCES: When ingredients are from a foreign country, the contractor shall have that ingredient listed on their “Master List of Ingredients from Foreign Sources”. For each ingredient, the Master List shall list the ingredient, the country of origin, and the product(s) in which the ingredient is used. The Master List shall be updated as necessary. The Master List shall be provided to the DLA Troop Support Contracting Officer upon request. INGREDIENT SOURCES: The following ingredient suppliers are being provided: CONTINUED ON NEXT PAGE CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: SPE3S1-16-R-0012 PAGE 13 OF 112 PAGES Ingredient Company/ Point of Contact #FT150302 -Premix - Calcium Carbonate/Vit D3 DSM Nutritional Products (formerly Foritech) ▇▇▇▇ ▇▇▇▇▇▇▇▇▇▇ ▇▇▇▇▇, ▇▇▇▇▇▇▇▇▇▇▇, ▇▇ ▇▇▇▇▇ POC: ▇▇▇▇ ▇▇▇▇▇▇▇▇- Foritech Premixes Phone: (▇▇▇) ▇▇▇-▇▇▇▇ Email: ▇▇▇▇.▇▇▇▇▇▇▇▇@▇▇▇.▇▇▇ #0306070 Plum/Date/Grape Paste (50 lb pail) #0306080 Plum/Date/Grape Paste (30 lb pack) ▇▇▇▇▇▇▇ Packaging Company POC: ▇▇▇▇▇ ▇▇▇▇▇▇ Phone: (▇▇▇) ▇▇▇-▇▇▇▇
View Source

Related to Minor defect

  • Correction of Defects 35.1 The Engineer shall give notice to the Contractor of any Defects before the end of the Defects Liability Period, which begins at Completion and is defined in the Contract Data. The Defects Liability Period shall be extended for as long as Defects remain to be corrected. 35.2 Every time notice of a Defect is given, the Contractor shall correct the notified Defect within the length of time specified by the Engineer’s notice.

  • Liability for defects 5.1 The Customer is required to inspect the delivered Products without undue delay after delivery and to report any defects. 5.2 The delivered Products are deemed to have been approved if ▇▇▇▇, with regard to obvious defects, obvious shortages or other defects which were or would have been identifiable in the course of an immediate, careful inspection, has not received notifi- cation of the defect within 7 days of delivery of the product, or otherwise – in the case of unclear or hidden defects – within 7 days of the discovery of the defect or the time at which the defect was identifiable to the Customer in the course of normal use of the Product without closer inspection. 5.3 In the event of a justified complaint, the Customer will be entitled to two attempts to rectify defects or make a replacement delivery at ▇▇▇▇'▇ discretion free of charge within a reasonable period of time. Shortages will be delivered subsequently. If two attempts to rectify defects or make a replacement delivery within a reasonable period of time are unsuccessful, the Customer will be entitled to the statutory rights, subject to the provisions of clause 7. Subsequent performance will include neither removal of the defective item nor reassembly if ▇▇▇▇ was not originally required to carry out assembly. The expenses required for the purpose of inspection and subsequent performance, in particular transport, travel, labour and material costs (not: removal and assembly costs), insofar as these are not increased because the subject matter of the contract is located at a place other than our Customer's place of performance, will be borne by ▇▇▇▇ if there is actually a defect. Otherwise, ▇▇▇▇ may demand compensation from the Customer for the costs incurred by the unjustified request for rectification of the defect (in particular inspection and transport costs), unless the lack of defectiveness was not identifiable for the Customer. ▇▇▇▇ can refuse to rectify defects or make a replacement delivery if the Customer does not fulfil its payment obligations towards ▇▇▇▇ to an extent that corresponds to the defect-free part of the service provided. 5.4 No warranty will be assumed, in particular, in the following cases: Unsuitable or in- correct use by the Customer or by third parties instructed by the Customer, in particular through the use of insufficiently qualified personnel, faulty assembly or commission- ing, natural wear and tear (wearing parts), faulty or negligent handling, improper maintenance, unsuitable operating materials, defective construction work, unsuitable construction land, chemical, electrochemical or electrical influences, provided ▇▇▇▇ is not responsible for these circumstances. 5.5 ▇▇▇▇ is also not required to provide a warranty insofar as defects of Products are based on defective materials supplied by the Customer or insofar as defects of Products are based on the fact that the Customer has prescribed the execution of the order ac- cording to construction plans of third parties. 5.6 A delivery of used Products agreed with the Customer in the individual case is made to the exclusion of any warranty, unless ▇▇▇▇ has caused the defect intentionally or through gross negligence or has fraudulently concealed the defect. 5.7 The warranty period will be one year from delivery or, where acceptance was stipu- lated, from acceptance. Replaced parts will become our property and must be sent to us at our request. If shipping, assembly or commissioning is delayed through no fault of our own, our liability will expire no later than twelve months after the transfer of risk. 5.8 The right of recovery in accordance with sections 445a, 445b German Civil Code (BGB) is excluded, unless ▇▇▇▇ has caused the defect intentionally or by gross neg- ligence or has fraudulently concealed the defect.

  • Latent Defects Notwithstanding anything to the contrary set forth herein, no acceptance, or deemed acceptance, by City pursuant to this Section shall be applicable with respect to any Latent Defects. An acceptance, or deemed acceptance, by City pursuant to this Section shall not mean that City has accepted, or the other party has been relieved of, responsibility for: (i) compliance with the Laws; (ii) the proper application of construction means or methods; or (iii) correcting any portion of the Project if it later is determined that any portion of the Project is inconsistent with the Final Documents and Drawings.

  • Nonconforming Work 5.6.1 Rejection, Removal and Replacement of Nonconforming Work

  • Correction of Errors Contractor shall perform, at its own cost and expense and without reimbursement from the District, any work necessary to correct errors or omissions which are caused by the Contractor’s failure to comply with the standard of care required herein.