REFERENCE SAMPLES Sample Clauses

REFERENCE SAMPLES. 9.1 AMGEN shall retain Reference Samples for each manufactured lot of Product released to PARTNER for a minimum of five (5) years after the expiration period. This period may be shortened if the period of stability of the material, as indicated in its specification, is shorter.

REFERENCE SAMPLES. NASTECH shall supply MERCK, upon request, with reasonable quantities of reference standards relating to PRODUCT, at the [***] of NASTECH, in order to facilitate MERCK's confirmatory testing.

REFERENCE SAMPLES. 8.1 The collection and storage of any reference samples of each batch of Material delivered to GEHC shall be the responsibility of the Supplier.

REFERENCE SAMPLES. ▇▇▇ shall retain reference samples from each batch of Finished Products for the period of time required by applicable Law after the expiry date. Finished Products will be kept in their final packaging and stored under the recommended conditions. Samples of starting materials (other than solvents, gases and water) will be retained for the period of time required by applicable Law after the expiry date of the corresponding Finished Product. ▇▇▇ DOVONEX® AGREEMENT 16 shall retain samples sufficient to conduct at least two (2) re-examinations and an annual evaluation. ▇▇▇ shall make reference samples available for inspection, testing, analysis and examination by WCCI and any relevant Governmental or Regulatory Authority, promptly upon request of WCCI.

REFERENCE SAMPLES. LEO shall retain reference sample▇ ▇rom each batch of Finished Products for the period of time required by applicable Law after the expiry date. Finished Products will be kept in their final packaging and stored under the recommended conditions. Samples of starting materials (other than solvents, gases and water) will be retained for the period of time required by applicable Law after the expiry date of the corresponding Finished Product. LEO shall retain samples ▇▇fficient to conduct at least two (2) re-examinations. LEO shall make reference samples ▇▇▇ilable for inspection, testing, analysis and examination by GALEN and any relevant Government▇▇ ▇▇ Regulatory Authority, promptly upon request of GALEN.

REFERENCE SAMPLES ordered before Commencement Ordering process, terms and conditions Delay

REFERENCE SAMPLES. ARIAD shall retain sufficient samples from each batch of Product (each, a “Reference Sample”) to allow retesting to be performed. In no event shall the amount retained from each batch be less than the amount needed to perform [***] ([***]) complete sets of necessary tests excluding bioburden. ARIAD shall retain each Reference Samples from the date of production until the date that is [***] ([***]) [***] following the expiry date for the relevant batch (or, if longer, the minimum period required by Applicable Laws).

REFERENCE SAMPLES. NASTECH shall supply P&GP, upon request, with reasonable quantities of reference standards relating to PRODUCT as specified in the QUALITY AGREEMENT, [***], in order to facilitate P&GP's confirmatory testing.

REFERENCE SAMPLES. They are adopted for products for which SAPA has issued only the dimensional drawing and/or specifications, or, having binding characteristics that cannot be expressed or qualified by drawing (e.g.: colour, appearance, etc.). These samples may be instituted and used by the bodies concerned to compare the conformity of the product and in cases of dispute, they must, therefore, be replaced whenever the product undergoes changes regarding the characteristics represented in the sample itself or renewed according to the deadlines of the programme, in the case of products subject to ageing, perishable or alienated. The reference sampling will be identified with an approval label signed for acceptance by SAPA Quality Assurance and the Supplier. The Supplier is responsible for the approval activities.