SAMPLE CONTAINERS Sample Clauses

The SAMPLE CONTAINERS clause defines the requirements and responsibilities related to the provision, use, and handling of containers used for collecting or transporting samples. Typically, this clause specifies which party must supply the containers, the standards or specifications the containers must meet, and any procedures for returning or disposing of them after use. By clearly outlining these details, the clause ensures that samples are properly managed and preserved, reducing the risk of contamination or loss and clarifying logistical responsibilities between the parties.
SAMPLE CONTAINERS. The CONTRACTOR shall provide the COUNTY with sample containers of adequate number, size, and type, pre-labeled, and containing preservatives, if required (sample container type shall be as specified by approved methods in accordance with section 1 of this scope of work (“Laboratory Procedures for the Analyses of Groundwater and Surface Waters”). Preparation of sample containers shall include proper cleaning and/or sterilization as specified in the appropriate methods. Unused portions of water samples will be retained by CONTRACTOR in the containers in which they were collected for a minimum period of four weeks following transmittal of report of analysis to COUNTY in case a repeat analysis is required. Following this period of retention, the unused portion of water samples shall be discarded by CONTRACTOR at no additional cost to COUNTY.
View SourceView Similar (7)
SAMPLE CONTAINERS. The Contractor shall either provide County with disposable or recyclable sample containers of adequate number, size and type (sample container must be quality assured to be free of residual organic and trace metal contaminants). Sample containers shall be adequately prepared or pretreated by Contractor to prevent contamination of the samples. Contractor shall periodically provide County with data on "container blank" analyses to assure that adequate pretreatment is performed. County will accept pre-cleaned containers from approved Companies, such as I-Chem, and may request certified containers supported by quality control documentation.
View SourceView Similar (7)
SAMPLE CONTAINERS. The Contractor shall provide all the necessary new or certified-clean sample bottles and sample labels as required to perform field sampling. Reagent grade preservatives shall be added to the appropriate sampling container by the Contractor prior to shipment of bottles. Sample containers shall be pre-labeled identifying the analyses types requested and preservatives used by the City. The sample label information provided by the City will correspond to information contained in the chain of custody forms and shall include: the analyses requested, the sample ID number, the date and time the sample was taken, the location of field sampling, and the name or initials of the sampler. The Contractor shall supply any necessary trip blanks. The Contractor shall subject all supply bottles and/or containers to a Quality Assurance and Quality Control program and shall conduct a testing program on sample bottles and/or containers.
View SourceView Similar (2)
SAMPLE CONTAINERS. AFL may provide sample containers upon request. AFL reserves the right to charge a fee for sample containers.
View SourceView Similar (2)
SAMPLE CONTAINERS. Company may provide sample containers upon request. Company reserves the right to charge a fee for sample containers.
View Source
SAMPLE CONTAINERS. Paragon will provide all sample containers for use on this project. Sample containers will only be used one time. Paragon supplies vendor-prepared I-Chem 200™, 300™, Eagle Pitcher (level 3), or equivalent sample containers. Paragon’s sample control department maintains certificates of cleanliness, which are provided to clients upon request. A summary sheet of sample containers for each sample will be prepared prior to sample collection, once bottles are received by the contract laboratory.
View Source
SAMPLE CONTAINERS. Charges will apply. Only project specific sampling containers will be supplied. Soil Sampler Vials (ex. Encores) Method 5035 $15 Tedlar Bags Storm Water Sampling Kit Request Quote $15 SMR Sampling Kit $10 Wipe Kits, 15cm x 15cm, for metals ASTM E1792 $2.50 Wipe Kits, filter paper, for organic compounds $2.50 Sorbent Tubes, TPH Diesel NIOSH 1550 $25/each PUF cartridges and housing, Low Volume Quote XAD Sorbent Tubes, High Volume Quote $3 per sample container (including Tedlar bags). $10 per container No charge for the shipment of samples to Torrent Lab within the San Francisco Bay Area by Federal Express Ground Service only. There will be a charge for Fed Ex overnight shipping.
View Source
SAMPLE CONTAINERS. ‌ Sample containers will be selected based on the laboratory parameter analyzed. All containers will be provided by the analytical laboratory in a new pre-cleaned condition, collected into the appropriate sampling container, and placed in a chilled cooler for shipment to the analytical laboratory. All sample containers will be packed in a way that minimizes breakage.
View Source

Related to SAMPLE CONTAINERS

  • Containers An extra charge will be made for returnable containers and special shipping devices (such as oil barrels, reels, tarpaulins, commutator clamps, etc.) where they are consigned to the Purchaser, but refund will be made if returned in good condition to the factory, or other points designated by EXION, within ninety (90) days from the date of original shipment, charges prepaid.

  • Packing Materials and Containers for Shipment Packing materials and containers in which a good is packed for shipment shall be disregarded in determining whether: (a) all non-originating materials used in the production of the good undergo an applicable change in tariff classification set out in Annex 4; and (b) the good satisfies a regional value content requirement.

  • Packaging Materials and Containers for Retail Sale 1. When packaging materials and containers in which a good is packaged for retail sales are classified in the Harmonized System with the good, they shall not be taken into account in determining whether all non-originating materials used in the production of the good undergo the applicable change in tariff classification set out in Annex 4.03. 2. When the good is subject to a requirement of regional value content, the value of these packaging materials and containers shall be taken into account as originating or non-originating materials, as the case may be, in calculating the regional value content of the good.

  • Preservative-treated Wood Containing Arsenic Grantee may not purchase preservative-treated wood products containing arsenic in the performance of this Agreement unless an exemption from the requirements of Chapter 13 of the San Francisco Environment Code is obtained from the Department of the Environment under Section 1304 of the Code. The term “preservative-treated wood containing arsenic” shall mean wood treated with a preservative that contains arsenic, elemental arsenic, or an arsenic copper combination, including, but not limited to, chromated copper arsenate preservative, ammoniacal copper zinc arsenate preservative, or ammoniacal copper arsenate preservative. Grantee may purchase preservative-treated wood products on the list of environmentally preferable alternatives prepared and adopted by the Department of the Environment. This provision does not preclude Grantee from purchasing preservative-treated wood containing arsenic for saltwater immersion. The term “saltwater immersion” shall mean a pressure-treated wood that is used for construction purposes or facilities that are partially or totally immersed in saltwater.

  • Samples The Contractor shall submit the following samples of Materials and relevant information to the Authority’s Engineer for pre-construction review: (a) manufacturer's test reports and standard samples of manufactured Materials; and (b) samples of such other Materials as the Authority’s Engineer may require.