Testing and Quality Control Sample Clauses

POPULAR SAMPLE Copied 1 times
Testing and Quality Control. The Contractor shall engage the services of an approved and independent testing laboratory for the testing of materials and the quality testing of layerworks to ensure that his work conforms to the specifications. Additional testing may be done as per item 1.3.1 PSA 2 by the Engineer /client. No separate payment will be made for contracting the services of an approved laboratory and the costs for complying with this requirement will be deemed to be included in the Contractor's tendered rates for the various items of work requiring testing in accordance with the specifications. The results of all tests performed during the course of the Contract will be made available to the Municipality as soon as these become available.
View SourceView Similar (2)
Testing and Quality Control. (i) Contractor to engage services of an independent laboratory Notwithstanding the requirements of the Specifications pertaining to testing and quality control, the Contractor shall engage the services of an approved independent laboratory to undertake all testing of materials, the results of which are specified in, or may reasonably be inferred from, the Contract. These results will be taken into consideration by the Employer’s Agent in deciding whether the quality of materials utilised, and workmanship achieved by the Contractor comply with the requirements of the Specifications. The foregoing shall apply irrespective of whether the specifications indicate that the said testing is to be carried out by the Employer’s Agent or by the Contractor. The Contractor shall be responsible for arranging with the independent testing laboratory for the timeous carrying out of all such testing specified in the Contract, at not less than the frequencies and in the manner specified. The Contractor shall promptly provide the Employer’s Agent with copies of the results of all such testing carried out by the independent laboratory. For the purposes of this clause, an "independent laboratory" shall mean an "approved laboratory" (as defined in subclause PSA 7.2) which is not under the management or control of the Contractor and in which the Contractor has no financial interest, nor which has any control or financial interest in the Contractor. (ii) Additional testing required by the Employer’s Agent In addition to the provisions of subclause C3.4.2.5(b)(i): Contractor to engage services of an independent laboratory, the Employer’s Agent shall be entitled at times during the Contract to require that the Contractor arrange with the independent laboratory to carry out any such tests, additional to those described in subclause C3.4.2.5(b)(i), at such times and at such locations in the Works as the Employer’s Agent shall prescribe. The Contractor shall promptly and without delay arrange with the independent laboratory for carrying out all such additional testing as required by the Employer’s Agent, and copies of the test results shall be promptly submitted to the Employer’s Agent. (iii) Costs of testing (a) Tests in terms of subclause C3.
View SourceView Similar (3)
Testing and Quality Control. Buyer shall have the right at all times during the performance of this Agreement to request that Seller perform reasonable tests and inspections from time to time to assure that the Product conforms to the Product Warranty and applicable legal requirements. From time to time, upon Buyer’s reasonable request, Seller will provide Buyer with such data, specifications, test results, test methodologies, sampling schedules, and other documents and information as may enable Buyer to assure that the Product conforms to the Product Warranty and applicable legal requirements. Buyer shall make the results of all such tests and inspections available to Seller at Seller’s request. Both parties acknowledge that Buyer’s ability to request tests for certain aspects of compliance does not release or diminish in any way Seller’s obligations under the Product Warranty or applicable legal requirements.
View SourceView Similar (2)
Testing and Quality Control. Observation of the Contractor's work to determine compliance with the plans and specifications will include testing of material installed on the project as well as inspection of construction as dictated by the International Building Code and as required in the contract documents. A Testing Laboratory, contracted by the Owner, shall do testing of materials furnished and work performed. The Contractor shall use only materials in the work, which meet the requirements of the specifications. When requested, the Contractor shall furnish a complete written statement of the origin, composition, and/or manufacturer of any or all materials that are to be used in the work. All materials not conforming to the requirements of the specifications will be rejected. THIS QUALITY CONTROL SERVICE DOES NOT RELIEVE THE CONTRACTOR OF HIS RESPONSIBILITY WITH REGARD TO CONSTRUCTING THE WORK IN ACCORDANCE WITH THE CONTRACT. Contractor shall submit appropriate tests including, but not limited to: 1) Any test required in the technical specifications 2) Any structural element called for on the plans, including, but not limited to dam construction, concrete asphalt roads or paths, shelters, bridges or other structure tests, pressure test of irrigation. 3) Test to prove adequacy of design and construction of any feature that may have been accepted by Owner under contractor's "Alternate Proposal". 4) Any test that may be occasioned by any local, state, or federal law.
View Source
Testing and Quality Control a SPECIFICATIONS; INSPECTION. All Products delivered to GNP must meet the specifications in SCHEDULE 2 (or as otherwise agreed to by the parties and incorporated herein, the "Release Specifications") and contain a certificate of analysis. Prior to the initial shipment of Products to GNP, GalaGen agrees to provide GNP with complete specifications. Further, GalaGen agrees to provide GNP with analytical test methodology and analytical and technical information on Products for quality control purposes. GNP shall have the right to inspect during reasonable business hours GalaGen's production facilities used in connection with the manufacture of Products. GalaGen agrees to grant GNP reasonable access to the reports, records and other documents relating to the manufacture of Products, including copies of all inspection and other reports by federal, state and local regulatory agencies. GalaGen shall have the right to inspect GNP's production facilities during reasonable business hours in connection with production of products incorporating Products.
View Source
Testing and Quality Control. The converted timing database will be downloaded to a test controller to verify proper conversion and acceptance in the controller environment. Engineers will validate that the databases have been properly converted prior to making a recommendation for field deployment. TJKM will provide oversite and quality control of this step to ensure controllers are field-ready before deployment.
View Source
Testing and Quality Control 
View SourceView Similar (2)

Related to Testing and Quality Control

  • SMHS Governance, Safety and Quality Requirements 4.1 Participates in the maintenance of a safe work environment. 4.2 Participates in an annual performance development review. 4.3 Supports the delivery of safe patient care and the consumers’ experience including participation in continuous quality improvement activities in accordance with the requirements of the National Safety and Quality Health Service Standards and other recognised health standards. 4.4 Completes mandatory training (including safety and quality training) as relevant to role. 4.5 Performs duties in accordance with Government, WA Health, South Metropolitan Health Service and Departmental / Program specific policies and procedures. 4.6 Abides by the WA Health Code of Conduct, Occupational Safety and Health legislation, the Disability Services Act and the Equal Opportunity Act.

  • STANDARDS AND QUALITY The Supplier shall at all times during the Contract Period ensure that the Services are delivered in accordance with: the Digital Service Design Manual (and the Supplier shall comply with the processes and procedures set out therein); the Standards; the KPIs; the Methodology; the applicable SOW; and all other applicable provisions of this Contract.

  • EMHS Governance, Safety and Quality Requirements 4.1 Participates in the maintenance of a safe work environment. 4.2 Actively participates in the Peak Performance program. 4.3 Supports the delivery of safe patient care and the consumers’ experience including participation in continuous quality improvement activities in accordance with the requirements of the National Safety and Quality Health Service Standards and other recognised health standards. 4.4 Completes mandatory training (including safety and quality training) as relevant to role. 4.5 Performs duties in accordance with the EMHS Vision and Values, WA Health Code of Conduct, Occupational Safety and Health legislation, the Disability Services Act and the Equal Opportunity Act and Government, WA Health, EMHS and Departmental / Program specific policies and procedures.

  • NMHS Governance, Safety and Quality Requirements 2.1 Participates in the maintenance of a safe work environment. 2.2 Participates in an annual performance development review. 2.3 Supports the delivery of safe patient care and the consumers’ experience including participation in continuous quality improvement activities in accordance with the requirements of the National Safety and Quality Health Service Standards and other recognised health standards. 2.4 Completes mandatory training (including safety and quality training) as relevant to role. 2.5 Performs duties in accordance with Government, WA Health, North Metropolitan Health Service and Departmental / Program specific policies and procedures. 2.6 Abides by the WA Health Code of Conduct, Occupational Safety and Health legislation, the Disability Services Act and the Equal Opportunity Act.

  • Use; Quality Control a. Neither party may alter the other party’s trademarks from the form provided and must comply with removal requests as to specific uses of its trademarks or logos. b. Each party agrees to use, and to cause its Permitted Sublicensees to use, the other party’s trademarks only in good faith and in a dignified manner consistent with such party’s use of the trademarks. Upon written notice to the breaching party, the breaching party has 30 days of the date of the written notice to cure the breach or the license will be terminated.