CREW REST Sample Clauses

POPULAR SAMPLE Copied 1 times
CREW REST. There will be a scheduled twenty-four (24) hour crew rest at layover stations; When the outbound and the return flight are scheduled to operate on the same type of aircraft, cabin personnel will receive no less crew rest than that received by the pilots. This restriction does not apply; where one of the two flight legs is scheduled to operate on a different type of aircraft the pilots cannot operate in an irregular operation to contractual differences in the definition of the duty period
View SourceView Similar (8)
CREW REST. Minimum crew rest, prior to first DOD segment or between DOD segments, is 10 hours. At the contractor’s discretion, that rest can be reduced to nine hours if the crew is still able to receive eight hours of uninterrupted rest. NOTE: The reduced rest cannot be combined with the two-hour crew duty extension during a preceding or subsequent duty period.
View Source
CREW REST a. Any duty day that is scheduled for or actually exceeds eight (8) consecutive “live” block hours will require rest for Flight Attendants. b. In the event all seats are occupied, the Flight Attendant rest seat shall be a cabin jumpseat.
View Source
CREW REST. Any Flight Attendant who works a Duty Period that exceeds fourteen (14) hours, whether scheduled or unscheduled, must be given twelve (12) hours of rest at the end of duty. In this situation, the Flight Attendant's rest period cannot be reduced. A Flight Attendant who is unable to check into their hotel room, through no fault of their own, may notify Crew Services to ensure that they receive contractual rest.
View Source
CREW REST. When an Employee who is required to work in a situation whereby they have less than eight (8) hours of rest available at the completion of their assigned duties until the beginning of their assigned starting time of their next assigned shift, within the assigned workweek, the Employee will be allowed to report to work eight (8) hours after leaving the facility to report back to work for their next assigned shift, as defined in Article 12 or to take PTO, or Leave of Absence at the Employee’s choice.
View Source
CREW REST. 22.04.01 Company is committed to ensuring an employee has a minimum rest period of at least eight (8) consecutive and uninterrupted hours off duty between the end of one working period and the commencement of the next working period. Such rest periods shall be applicable within each twenty-four
View Source

Related to CREW REST

  • Uncovering and Correction of Work 12.1 The Contractor shall promptly correct Work rejected by the Owner or failing to conform to the requirements of the Contract Documents, whether observed before or after Substantial Completion and whether or not fabricated, installed or completed, and shall correct any Work found to be not in accordance with the requirements of the Contract Documents within a period of two years from the date of Substantial Completion, or by terms of an applicable special warranty required by the Contract Documents. The provisions of this Article apply to work done by Subcontractors as well as to Work done by direct employees of the Contractor. 12.2 At any time during the progress of the work, or in any case where the nature of the defects shall be such that it is not expedient to have them corrected, the Owner, at their option, shall have the right to deduct such sum, or sums, of money from the amount of the contract as they consider justified to adjust the difference in value between the defective work and that required under contract including any damage to the structure.

  • Ordering and Provisioning 53.3.1 CenturyLink will provide necessary ordering and provisioning business process support as well as those technical and systems interfaces as may be required to enable CLEC to provide resale services, including the functions, features, and capabilities of such services, and Unbundled Network Elements. If CenturyLink deploys any enhanced electronic capability CenturyLink will notify CLEC of availability and CLEC shall use the processes for performing transaction(s) to the extent practicable and the use of any other interface or process will be discontinued. 53.3.2 The Parties agree that orders for services under this Agreement will not be submitted or accepted until thirty (30) Days after the completion of all account establishment activities, including but not limited to, the documents and information subscribed in Section 45.1, unless the Parties mutually agree upon a different date based on the specific circumstances of the Parties’ relationship. 53.3.3 Except as specifically provided otherwise in this Agreement, pre- ordering, ordering and provisioning of resold services shall be governed in accordance with CenturyLink’s Standard Practices. 53.3.4 CenturyLink will provide provisioning intervals and procedures for design and complex services on a nondiscriminatory basis. Complex Service Order charges pursuant to Tariff terms may apply. 53.3.5 Where Technically Feasible, the NEAC will coordinate support for all designed and/or complex services provided to CLEC. 53.3.6 To the extent required by Applicable Law, and upon request from CLEC, employing CenturyLink’s LSR, CenturyLink will provide blocking of 700, 900, and 976 services, or other services of similar type as may now exist or be developed in the future, and shall provide Billed Number Screening (BNS), including required LIDB updates, or equivalent service for blocking completion of bill-to-third party and collect calls, on a line, PBX, or individual service basis. Blocking shall be provided to the extent (a) it is an available option for the Telecommunications Service resold by CLEC, or (b) it is Technically Feasible when requested by CLEC as a function of Unbundled Network Elements. 53.3.7 When ordering a resale service via an LSR Service Order, CLEC may order separate interLATA and IintraLATA service providers (i.e., two PICs) on a line or trunk basis, and CLEC agrees to pay the applicable Service Order and PIC charges associated with such order. CenturyLink will accept PIC change orders for IntraLATA toll and long distance services through the service provisioning process. 53.3.8 The standard Service Order charges as listed in the Table 1 of this Agreement shall apply to all orders.

  • CONTRACTOR NAME CHANGE An amendment is required to change the Contractor's name as listed on this Agreement. Upon receipt of legal documentation of the name change the State will process the amendment. Payment of invoices presented with a new name cannot be paid prior to approval of said amendment.

  • Procedures for Providing NP Through Full NXX Code Migration Where a Party has activated an entire NXX for a single Customer, or activated at least eighty percent (80%) of an NXX for a single Customer, with the remaining numbers in that NXX either reserved for future use by that Customer or otherwise unused, if such Customer chooses to receive Telephone Exchange Service from the other Party, the first Party shall cooperate with the second Party to have the entire NXX reassigned in the LERG (and associated industry databases, routing tables, etc.) to an End Office operated by the second Party. Such transfer will be accomplished with appropriate coordination between the Parties and subject to appropriate industry lead times for movements of NXXs from one switch to another. Neither Party shall charge the other in connection with this coordinated transfer.