Daily Inspection Reports Sample Clauses

The Daily Inspection Reports clause requires regular documentation of site conditions, work progress, and any issues encountered each day. Typically, this involves the contractor or site supervisor completing a standardized report at the end of each workday, noting activities performed, materials used, weather conditions, and any incidents or delays. This clause ensures ongoing transparency and accountability, helping to promptly identify and address problems while maintaining a clear record for project management and dispute resolution.
Daily Inspection Reports. Each Contractor quality control technician shall maintain a daily log of all inspections performed for both Contractor and subcontractor operations on a form acceptable to the Engineer. These technician's daily reports shall provide factual evidence that continuous quality control inspections have been performed and shall, as a minimum, include the following: 1. Technical specification item number and description; 2. Compliance with approved submittals; 3. Proper storage of materials and equipment; 4. Proper operation of all equipment; 5. Adherence to plans and technical specifications; 6. Review of quality control tests; and
View SourceView Similar (26)
Daily Inspection Reports. Daily Tracking of Bid Item Quantities.
View SourceView Similar (2)
Daily Inspection Reports. Each Contractor quality control technician shall maintain a daily log of all inspections performed for both Contractor and subcontractor operations on a form acceptable to the Designated Representative. The daily inspection reports shall identify inspections conducted, results of inspections, location and nature of defects found, causes for rejection, and remedial or corrective actions taken or proposed. The daily inspection reports shall be signed by the responsible quality control technician and the Superintendent. The Designated Representative shall be provided at least one copy of each daily inspection report on the Work day following the day of record. These technician's daily reports shall provide factual evidence that continues quality control inspections have been performed and shall, as a minimum, include the following:
View SourceView Similar (2)
Daily Inspection Reports. Reports shall identify daily start and stop times, size of contractor’s crew, equipment used, visitors to jobsite, climatic conditions throughout the day, quantity of materials used, work accomplished, periods of Contractor down time and cause, inspection procedures used and results, verification and recording of surface preparation, coating material "batch numbers" mixing, thinning, application and thickness. All entries shall be dated and timed. i. Pictures shall be taken at key points in the project documenting the progress of the work.
View Source
Daily Inspection Reports. Each CMR quality control technician shall maintain a daily log of all inspections performed for both CMR and subcontractor operations on a form acceptable to the Design Professional. These technician’s daily reports shall provide factual evidence that continuous quality control inspections have been performed and shall, as a minimum, include the following: (1) technical specification item number and description; (2) compliance with approved submittals; (3) proper storage of materials and equipment; (4) proper operation of all equipment; (5) adherence to plans and technical specifications; (6) review of quality control tests; and
View Source
Daily Inspection Reports. Sterling Crane LLC has provided each crane with a log to assist you in complying with OSHA inspection requirements. Bare rental customers are required to designate a competent person to inspect cranes on a daily basis and record inspection in the Crane Log Book. If you do not locate a Crane Log book, please contact our Service Office immediately at (▇▇▇) ▇▇▇-▇▇▇▇.
View Source
Daily Inspection Reports. Contractor QC personnel shall maintain a daily log of all inspections performed for both Contractor and Subcontractor operations on a form acceptable to the Engineer. These will include all testing and certifications performed at the source by the manufacturer. These daily reports shall provide factual evidence and certify that continuous QC inspections have been performed and shall, at a minimum, include the following:
View Source

Related to Daily Inspection Reports

  • Inspection Reports A "full inspection report" comprises a Site Master File (compiled by the manufacturer or by the inspectorate) and a narrative report by the inspectorate. A "detailed report" responds to specific queries about a firm by the other Party.

  • Construction Reports Each Constructing Entity shall issue reports to each other Construction Party on a monthly basis, and at such other times as reasonably requested, regarding the status of the construction and installation of the Interconnection Facilities. Each Construction Party shall promptly identify, and shall notify each other Construction Party of, any event that the Construction Party reasonably expects may delay completion, or may significantly increase the cost, of the Interconnection Facilities. Should a Construction Party report such an event, Transmission Provider shall, within fifteen days of such notification, convene a technical meeting of the Construction Parties to evaluate schedule alternatives.

  • Evaluation Reports Where a formal evaluation of an employee's performance is carried out, the employee shall be provided with a copy to read and review. Provision shall be made on the evaluation form for an employee to sign it. The form shall provide for the employee's signature in two (2) places, one indicating that the employee has read and accepts the evaluation, and the other indicating that the employee disagrees with the evaluation. The employee shall sign in one of the places provided within seven (7) calendar days. No employee may initiate a grievance regarding the contents of an evaluation report unless the signature indicates disagreement with the evaluation. The employee shall receive a copy of the evaluation report at the time of signing. An evaluation report shall not be changed after an employee has signed it, without the knowledge of the employee, and any such changes shall be subject to the grievance procedure.

  • Periodic Review of Costs of Environmental Compliance In the ordinary course of its business, the Company conducts a periodic review of the effect of Environmental Laws on the business, operations and properties of the Company and its subsidiaries, in the course of which it identifies and evaluates associated costs and liabilities (including, without limitation, any capital or operating expenditures required for clean-up, closure of properties or compliance with Environmental Laws or any permit, license or approval, any related constraints on operating activities and any potential liabilities to third parties). On the basis of such review and the amount of its established reserves, the Company has reasonably concluded that such associated costs and liabilities would not, individually or in the aggregate, result in a Material Adverse Change.

  • Inspection Checklist (Check one)