Description of the Materials Sample Clauses

Description of the Materials. 1.1: The Provider reserves the right to request immediate feedback regarding the Material quality. If there are concerns with Material quality, the Recipient will contact the Provider with this information.
View SourceView Similar (2)
Description of the Materials. The Materials include all collections listed in the table below and attachments [describe].
View SourceView Similar (2)
Description of the Materials. The Materials being provided to MCRI by the Supplier include: [MCRI employee to insert description of the materials being provided by Supplier – If the Material is data, indicate the type (de-identifed, re-identifable, identifiable), description and format being shared] ______________________________________________________________________________ In this document: Confidential Information of the Supplier includes the following, whether or not in material form: all information that is confidential to the Supplier and that is disclosed (whether before or after the execution of this agreement) by the Supplier to the MCRI including but not limited to all information relating to the Material and any confidential know-how, data, results, models, samples, intellectual property, technology, trade secrets, drawings, processes, formulae, product development plans, but excludes the following information, being information that: is public knowledge or is lawfully known to or in the possession or control of the MCRI, other than as a result of a breach of confidentiality or this agreement; is independently developed by the MCRI without the use of the Supplier confidential information and/or Materials; or is required by law to be disclosed. Intellectual Property Rights means all intellectual property rights subsisting anywhere in the world, including the following rights: patents, copyright (including future copyright and software), rights in circuit layouts, designs, trade and service marks (including goodwill in those marks), domain names and trade names, confidential information and any right to have confidential information kept confidential whether or not such rights are registered or capable of being registered; and to the extent available any application or right to apply for registration of any of the rights referred to in paragraph (a). The MCRI: may only use the Material for the Purpose; must not use the Material or any products containing any part of the Material or resulting from the use of the Material, for any commercial purpose without the prior written consent of the Supplier; must comply with any applicable laws in relation to the importation, transportation, use, maintenance or disposal of the Material; must not distribute or release the Material (nor any unmodified derivatives or genetically engineered modifications which are based on the Material) to any person other than the employees of the MCRI, and must make sure that no one is allowed to take or...
View SourceView Similar (2)
Description of the Materials. The Materials being provided by XYZ to the Recipient include: [XYZ employee to insert description of the materials being provided by Supplier – If the Material is data, indicate the type (de-identifed, re- identifable, identifiable), description and format being shared); If the Material is biospecimen, XYZ employee to ensure compliance with the Policy to Store, Access and Handling of Samples] In this document:
View Source
Description of the Materials. In the space below, please write a brief description of the materials, purpose of the materials, and how they will be transported.
View Source
Description of the Materials. All HVAC filters must have a Minimum Efficiency Reporting Value (MERV) of 8 when evaluated under the guidelines of ASHRAE Standard 52.2-2007. It must have an average dust spot efficiency of 30% and an average arrestance of 95% when evaluated under ASHRAE Standard 52.1-2007. Media must be classified UL-900 Class II. The HVAC panel filters utilized for this Contract must be manufactured with pleated synthetic media mounted in a rigid craft-board frame, constructed in such a manner as to prevent raking during the intended use. The filter media must be bonded to an expanded metal support grid for rigidity. The media must be bonded to the perimeter of the frame with a moisture-resistant adhesive in such a manner as to provide a continuous seal against filter bypass. The media must withstand a temperature of 400 degrees F without smoking or burning. It must have a minimum efficiency of MERV 8 with an Initial Resistance (in. WG) of .153 inches when tested at 295 FPM, minimum 12 pleats per lineal foot (1” filters); minimum 10 pleats per lineal foot (2” filters); and minimum 9 pleats per lineal foot (4” filters). The Dust Holding Capacity for a 24" X 24" filter must hold a minimum of 195.6 grams when tested to a final resistance of 1". The roll filter media utilized for this Contract must be constructed of multi-denier 100% polyester fibers treated with flame retardant, moisture proof chemical bonding agents having a minimum loft of 7/8". The media must utilize a semi-cured non-migrating, permanently tacky, non-viscous polyvinyl bonding agent on the “air leaving” side locking in smaller dirt particles. The media must withstand a temperature of 400 degrees F without smoking or burning. It must have a minimum efficiency of MERV 8 with an Initial Resistance (in. WG) of .153 inches when tested at 295 FPM. The minimum Dust Holding Capacity for a 24" X 24" filter section be 195.6 grams when tested to a final resistance of 1". The HVAC panel filters must be imprinted with size, length, width, thickness. Each filter will be date stamped or tagged including date of HVAC filter change and inspection and Technicians initials. HVAC filter samples must be submitted at time of bid. A 24” x 24” x 2” pleated panel filter and a 24” x 24” section of the roll filter media that will be utilized for the Contract for engineering evaluation and approval. Include independent laboratory ASHRAE Standard 52.2-2007 test reports for a typical panel filter and for the roll filter media to be us...
View Source
Description of the Materials. The Materials being provided to RCH by the Supplier include: [RCH employee to insert description of the materials being provided by Supplier – If the Material is data, indicate the type (de-identifed, re-identifable, identifiable), description and format being shared] ______________________________________________________________________________
View Source

Related to Description of the Materials

  • Indirect Materials Indirect materials shall be considered to be originating without regard to where they are produced and the value of such materials shall be their cost as reported in the accounting records of the producer of the good.

  • Other Materials On each date on which the Company is required to deliver a certificate pursuant to Section 7(l), the Company shall have furnished to the Agent such appropriate further information, opinions, certificates, letters and other documents as the Agent may reasonably request. All such opinions, certificates, letters and other documents will be in compliance with the provisions hereof.

  • Stored Materials Upon prior written agreement between the Contractor and Region 4 ESC, payment may be made for materials not incorporated in the work but delivered and suitably stored at the site or some other location, for installation at a later date. An inventory of the stored materials must be provided to Region 4 ESC prior to payment. Such materials must be stored and protected in a secure location and be insured for their full value by the Contractor against loss and damage. Contractor agrees to provide proof of coverage and additionally insured upon request. Additionally, if stored offsite, the materials must also be clearly identified as property of Region 4 ESC and be separated from other materials. Region 4 ESC must be allowed reasonable opportunity to inspect and take inventory of stored materials, on or offsite, as necessary. Until final acceptance by Region 4 ESC, it shall be the Contractor's responsibility to protect all materials and equipment. Contractor warrants and guarantees that title for all work, materials and equipment shall pass to Region 4 ESC upon final acceptance.

  • Customer Materials Subject to Section 4(a), all right, title and interest (including all Intellectual Property Rights) in and to the Customer Materials are owned by Customer or Customer’s suppliers.

  • Security of All Software Components Supplier will inventory all software components (including open source software) used in Deliverables, and provide such inventory to Accenture upon request. Supplier will assess whether any such components have any security defects or vulnerabilities that could lead to a Security Incident. Supplier will perform such assessment prior to providing Accenture with access to such software components and on an on-going basis thereafter during the term of the Agreement. Supplier will promptly notify Accenture of any identified security defect or vulnerability and remediate same in a timely manner. Supplier will promptly notify Accenture of its remediation plan. If remediation is not feasible in a timely manner, Supplier will replace the subject software component with a component that is not affected by a security defect or vulnerability and that does not reduce the overall functionality of the Deliverable(s).