DEVELOPMENT TIMETABLE Clause Samples

The Development Timetable clause sets out the schedule and key deadlines for completing various stages of a development project. It typically outlines milestones such as design submission, permit acquisition, construction phases, and final completion, specifying the dates or timeframes by which each must be achieved. This clause ensures all parties are aligned on expectations and responsibilities, helping to prevent delays and disputes by providing a clear framework for project progress.
DEVELOPMENT TIMETABLE. We will provide the deliverables to you according to the development timetable as outlined in the Proposal or Commercial Terms.
View SourceView Similar (3)
DEVELOPMENT TIMETABLE. A detailed project schedule needs to be developed. It is planned that the total elapsed time of the project will be approximately [**].
View SourceView Similar (2)
DEVELOPMENT TIMETABLE. Vendor shall commit and utilize sufficient resources to meet the development milestones and complete development of the Enhancements according to the development timetable set forth in Exhibit B attached hereto (the "Development Timetable"). Vendor agrees to notify XcelleNet promptly of any factor, occurrence, or event coming to its attention that may affect Vendor's ability to meet the requirements for the Enhancements as set forth in Exhibit A, or that is likely to occasion any delay in delivery of the Enhancements according to the schedule set forth in the Development Timetable.
View Source
DEVELOPMENT TIMETABLE. Project schedule will be developed by CDIC and PHILIPS jointly. Preferred completion date would allow for [CONFIDENTIAL TREATMENT REQUESTED].
View Source
DEVELOPMENT TIMETABLE. 3.1 Development and dispatch of the zinc hydrocolloid and zinc alginate Products shall be completed before April 30th, 1998. 3.2 Development and dispatch of the flat sheet zinc hydrogel shall be completed before 31st December, 1998.
View Source
DEVELOPMENT TIMETABLE. The Purchaser agrees to commence construction of the Development within twelve (12) months of closing; and to complete the Development within the following twenty-four (24) months. Commencement of construction is scheduled for the month of , ; with completion scheduled for the month of , .
View Source
DEVELOPMENT TIMETABLE. Stages and Completion Dates The Timetable for the development of a new Competency Based Classification Structure to be as detailed below: November 2004 A new Development Committee ("the Committee") shall be formed to oversee the development process. Membership of the Committee, shall consist of a maximum of: five AMWU Delegates plus an AMWU Official three NUW Delegates plus an NUW Official four management members nominated by the Company. The Organisational Development Manager will have responsibility for co coordinating the Committee. External expertise may be utilized if agreed by both Union and Company members of the Committee. March 2005 Committee to agree on the process to be used to achieve outcomes outlined in the timetable. May 2005 Review and update existing task reports and where necessary undertake new task analysis. September 2005 A process of competency matching will be undertaken March 2006 Committee to formulate and recommend a new Competency Based Classification Structure. June 2006 Review and if necessary amend, existing training and assessment structure. Identify additional training and assessment materials as required. Determine career progression methodology August 2006 Develop timelines for implementation of the Competency Based Classification Structure. Setting of the Weekly Wages and other conditions for each classification will be included in negotiations for the next Enterprise Agreement.
View Source
DEVELOPMENT TIMETABLE. Company shall provide its development and customization services in accordance with the milestone delivery schedule set forth as attached Exhibit B (the "Milestone Schedule"). Company agrees that time is of the essence in this Agreement and represents and warrants to Customer that, conditioned upon receiving timely feedback and cooperation from Customer, Company has the resources committed to this project to permit it to perform its services and to customize and deliver the software in accordance with the Milestone Schedule.
View Source

Related to DEVELOPMENT TIMETABLE

  • Development Plans Customer has provided Provider with a report attached hereto as Exhibit D (the “Current Development Plan”) describing in detail, as of January 1, 2017, the planned development, drilling, production, processing, treating, marketing and other activities to take place with respect to Dedicated Production and Customer Injected NGLs for the applicable Development Period. The information contained in the Current Development Plan is, with respect to the first three Years covered by the Current Development Plan, on a Quarter-by-Quarter basis, and with respect to the remaining Years covered by the Current Development Plan, on a Year-by-Year basis. The Current Development Plan attached hereto has been approved by the Parties. (a) From time to time during each Year of the Term, the Parties shall meet to discuss the planned development, drilling, production, processing, treating, marketing and other activities that Customer expects to take place with respect to Dedicated Production and Customer Injected NGLs for the then-applicable Development Period. Customer and Provider shall each make their respective representatives available to participate in such meetings and discussions. No later than August 1 of each such Year, Customer shall provide (or cause to be provided) to Provider a proposed update of the then-currently agreed Development Plan, prepared on the same basis as the Current Development Plan and describing in detail the planned development, drilling, production, processing, treating, marketing and other activities to take place with respect to Dedicated Production and Customer Injected NGLs for the then-applicable Development Period (any such update, an “Updated Development Plan” and, together with the Current Development Plan, each, a “Development Plan”). (b) Each proposed Development Plan shall include information as to the following, in each case, broken out, with respect to the first three Years covered by such Development Plan, on a Quarter-by-Quarter basis, and, with respect to the remaining Years covered by such Development Plan, on a Year-by-Year basis: (i) forward-looking production estimates for the applicable time period covered by such Development Plan for all Customer Gas and Customer Injected NGLs (A) that Customer reasonably and in good faith believes will become owned or Controlled by Customer during the time period covered by such Development Plan, and/or (B) that will be produced from (I) in the aggregate, all ▇▇▇▇▇ then-existing and (II) in the aggregate, all ▇▇▇▇▇ that are expected to be drilled during the time period covered by such Development Plan (each such Well reflected in such Development Plan, a “Planned Well” and, such collective estimates described in subsections (A) and (B), both with respect to a particular Quarter and an entire Year, the “Dedicated Production Estimates”); TERMS IN THIS EXHIBIT HAVE BEEN REDACTED BECAUSE CONFIDENTIAL TREATMENT FOR THOSE TERMS HAS BEEN REQUESTED. THE REDACTED MATERIAL HAS BEEN FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION, AND THE TERMS HAVE BEEN MARKED AT THE APPROPRIATE PLACE WITH TWO ASTERISKS (**). (ii) (A) each new receipt point (including the location thereof) proposed by Customer with respect to the Dedicated Production Estimate reflected in such Development Plan (each such receipt point, a “Planned Receipt Point”), (B) each Receipt Point at which Customer expects to Tender Customer Gas or Customer Injected NGLs reflected in such Development Plan into the TGP System, and (C) the estimated portion of the Dedicated Production Estimate contained in such Development Plan that Customer expects to Tender at each such Receipt Point and Planned Receipt Point; (iii) (A) each new delivery point (including the location thereof) proposed by Customer with respect to the Dedication Production Estimate reflected in such Development Plan (each such delivery point, a “Planned Delivery Point”), (B) each Delivery Point at which Customer expects to Nominate Customer Residue Gas or Customer NGLs produced from the Dedicated Production Estimate reflected in such Development Plan to be redelivered to Customer, and (C) the estimated volumes of Customer Residue Gas and Customer NGLs produced from the Dedication Production Estimate contained in such Development Plan that Customer expects to Nominate to each such Delivery Point; (iv) the earliest date on which each Planned Receipt Point and Planned Delivery Point included in the Development Plan is required by Customer to be placed into service, which date shall not be earlier than three Months after the January 1st that is immediately subsequent to the date that the Development Plan that initially reflected such Planned Receipt Point or Planned Delivery Point was delivered to Provider hereunder; (v) the anticipated characteristics of the production from the ▇▇▇▇▇ and Planned ▇▇▇▇▇ reflected in such Development Plan (including liquids content and gas and liquids composition) and the projected production volumes and production pressures applicable thereto; provided that Customer may utilize the existing and historical production information from similarly situated ▇▇▇▇▇; (vi) any (A) proposed revision to the then-existing Dedicated Area and/or any then-existing Dedicated Contract and/or (B) any new contract that Customer proposes to be a Dedicated Contract; and (vii) other information reasonably requested by Provider that is relevant to the design, construction, and operation of the TGP System, including (A) any applicable Plant Expansion or Facilities Modification proposed by Customer, (B) the relevant Receipt Point and Planned Receipt Point facilities applicable to such Development Plan, and (C) the relevant Delivery Point and Planned Delivery Point facilities applicable to such Development Plan. TERMS IN THIS EXHIBIT HAVE BEEN REDACTED BECAUSE CONFIDENTIAL TREATMENT FOR THOSE TERMS HAS BEEN REQUESTED. THE REDACTED MATERIAL HAS BEEN FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION, AND THE TERMS HAVE BEEN MARKED AT THE APPROPRIATE PLACE WITH TWO ASTERISKS (**).

  • Development Plan document specifying the work program, schedule, and relevant investments required for the Development and the Production of a Discovery or set of Discoveries of Oil and Gas in the Contract Area, including its abandonment.

  • Project Timeline The Project Timeline establishes a start and end date for each Phase of the Project. Developed during the Initiate & Plan Stage and revised as mutually agreed to, if needed, the timeline accounts for resource availability, business goals, size and complexity of the Project, and task duration requirements.

  • Development Schedule The Project shall substantially comply with the specific timetables and triggers for action set forth in Article 5 of this Agreement. The parties acknowledge that, as provided in G.S. 160A-400.25(b), the failure to meet a commencement or completion date shall not, in and of itself, constitute a material breach of this Agreement pursuant to G.S. 160A-400.27 but must be judged based upon the totality of the circumstances.

  • Development Program A. Development activities to be undertaken (Please break activities into subunits with the date of completion of major milestones) B. Estimated total development time