DMAS Installation of Software Clause Samples

The 'DMAS Installation of Software' clause defines the responsibilities and procedures for installing software provided by DMAS. Typically, this clause outlines whether DMAS or the client is responsible for the installation process, specifies any technical requirements or prerequisites, and may set timelines or conditions for successful installation. Its core practical function is to ensure that both parties understand their roles and obligations during the software installation phase, thereby minimizing misunderstandings and facilitating a smooth deployment process.
DMAS Installation of Software. For a Solution that includes Software that DMAS elects to install itself, the Software will be deemed to be installed when all Acceptance criteria as specified in the Contract documents have been met. Upon completion of installation and successful Acceptance testing, DMAS shall provide to Supplier written notice of Acceptance. Supplier shall proceed with full deployment of the Solution concurrently with or after DMAS’ installation of the Software, as agreed between DMAS and Supplier the Contract documents.
View SourceView Similar (4)
DMAS Installation of Software. If the Solution includes Software which may be installed by DMAS and DMAS elects to install the Software itself, the Software shall be deemed to be installed when all programs, program libraries and user interfaces are copied to and initialized on the appropriate equipment as executable by having DMAS invoke the primary function of each major Component of the Software or when Acceptance criteria as specified in the Contract have been met. DMAS shall provide to Supplier written notice of Acceptance upon completion of installation and successful Acceptance testing. Supplier shall proceed with full deployment of the Solution concurrently with or after DMAS’ installation of the Software, as agreed between DMAS and Supplier in the Contract
View Source
DMAS Installation of Software. If the Solution includes Software which may be installed by DMAS and DMAS elects to install the Software itself, the Software shall be deemed to be installed when all programs, program libraries and user interfaces are copied to and initialized on the appropriate equipment as executable by having DMAS invoke the primary function of each major Component of the Software or when Acceptance criteria as specified in the Contract have been met. DMAS shall provide to Supplier written notice of Acceptance upon completion of installation and successful Acceptance testing. Supplier shall proceed with full deployment of the Solution concurrently with or after DMAS’ installation of the Software, as agreed between DMAS and Supplier in the Contract Documentation of Software Configuration If the Solution includes configuration of Software by Supplier, Supplier shall provide to DMAS documentation containing a description of the configuration. Such documentation shall be sufficiently detailed such that any appropriately trained employee or Agent of DMAS may reconstruct the configuration of the Software. Managed Environment DMAS is establishing and building a multi-provider, integrated services platform (the “Integrated Services Platform”) for the delivery of certain IT services to DMAS and the other Business Partners within the IT environments supported by DMAS (collectively, the “Managed Environment”), as is further described in Integration Services (within Section 3.a.7.3) and by further notice from DMAS to Integrated Supplier from time to time. The Integrated Services Platform is and shall comprise various services provided by various third party suppliers, including the Services and Supplier (each such supplier, an “Integrated Supplier”), with which DMAS shall contract from time to time to provide services to DMAS and other Business Partners and Customers. The Managed Environment requires coordination, cooperation and integration among the Integrated Suppliers, notwithstanding that they may otherwise view themselves as competitors, in order to work together toward the common goal of uninterrupted, high quality services to DMAS, Business Partners, and the other Customers. In this regard, Integrated Supplier must perform the Services and its other obligations under this Contract and in connection therewith, interact and cooperate with others within the Managed Environment in a manner that, as a foremost guiding principle, first considers the best interests of DMAS and th...
View Source

Related to DMAS Installation of Software

  • Installation of Equipment You represent that there are no legal, contractual or similar restrictions on the installation of the Equipment in the location(s) you have authorized. It is your responsibility to ensure compliance with all applicable building codes, zoning ordinances, homeowners’ association rules, covenants, conditions, and restrictions related to the Service, to pay any fees or other charges, and to obtain any permits or authorizations necessary for the installation or use of the Service (collectively "Legal Requirements"). You are solely responsible for any fines or similar charges for violation of any applicable Legal Requirements. You acknowledge and agree that Viasat or its designated service provider will be required to access your premises and computer to install and maintain the Equipment, including, without limitation, the antenna and its components. Standard Equipment installations performed by Viasat-authorized installers include: (i) installation of the antenna to an outside wall or sloped roof; (ii) travel to and from your Service location within 50 miles of the installer’s office; (iii) cable routed through one exterior wall and one interior wall or floor; (iv) connection of the antenna to the modem using up to 150 feet of cable; (v) connection of the modem to one computer using up to 7 feet of cable; and (vi) required mounting and cabling hardware. Any different or additional installation services or hardware are non-standard and may result in additional charges to be agreed upon between you and the installer. All installations include attaching the Equipment to your computer, installing software on your computer and configuring your computer to optimize the performance of the Internet Service. You confirm that you have reviewed the installation plan and agreed to any associated charges. If you approved a roof mount, you acknowledge the potential risks associated with this type of installation (including, without limitation, with respect to any warranty that applies to your roof or roof membrane). By signing this Agreement, scheduling a service or installation visit, and permitting us or our service provider to enter your home, you are authorizing Viasat and its service provider to perform all of the above actions. You are responsible for backing up the data on your computer and we highly recommend that you do so prior to permitting access to us or one of our designated service providers. NEITHER VIASAT NOR ITS SERVICE PROVIDER SHALL HAVE ANY LIABILITY WHATSOEVER FOR ANY LOSSES RESULTING FROM THE EQUIPMENT OR ANY INSTALLATION, REPAIR OR OTHER SERVICES ASSOCIATED WITH THE EQUIPMENT, INCLUDING WITHOUT LIMITATION, DAMAGE TO YOUR PREMISES OR LOSS OF SOFTWARE, DATA OR OTHER INFORMATION FROM YOUR COMPUTER. This limitation does not apply to any damages arising from the gross negligence or willful misconduct of us or one of our designated service providers. Time frames for installation, if any, are not guaranteed and may vary depending on the types of services requested and other factors.

  • Software Installation The AGENCY shall request approval in writing from the COUNTY prior to installation of any software on COUNTY computer equipment. All software installations must be supervised by COUNTY technical support staff and proof of licensing is required. Upon completion, the AGENCY is responsible for reconfiguring the computers back to the original state.

  • Utility Installations Trade Fixtures Alterations 8.3.1 The term “Utility Installations” refers to all floor and window coverings, air and/or vacuum lines, power panels, electrical distribution, security and fire protection systems, communication cabling, lighting fixtures, HVAC equipment, plumbing, and fencing in or on the Premises. The term “Trade Fixtures” shall mean Lessee’s machinery and equipment that can be removed without doing material damage to the Premises. The term “Alterations” shall mean any modification of the improvements, other than Utility Installations or Trade Fixtures, whether by addition or deletion. “Lessee Owned Alterations and/or Utility Installations” are defined as Alterations and/or Utility Installations made by Lessee that are not yet owned by Lessor pursuant to Section 8.4.1.

  • Maintenance Repairs Utility Installations Trade Fixtures and Alterations (a) Subject to the provisions of Paragraphs 2.2 (Lessor’s warranty as to condition), 2.3 (Lessor’s warranty as to compliance with covenants, etc.), 7.2 (Lessor’s obligations to repair), 9 (damage and destruction), and 14 (condemnation), Lessee shall, at Lessee’s sole cost and expense and at all times, keep the Premises and every part thereof in good order, condition and repair, structural and non-structural (whether or not such portion of the Premises requiring repair, or the means of repairing the same, are reasonably or readily accessible to Lessee, and whether or not the need for such repairs occurs as a result of Lessee’s use, any prior use, the elements or the age of such portion of the Premises), including, without limiting the generality of the foregoing all equipment or facilities serving the Premises, such as plumbing, heating, air conditioning, ventilating, electrical, lighting facilities, boilers, fired or unfired pressure vessels, fire sprinkler and/or standpipe and hose or other automatic fire extinguishing system, including fire alarm and/or smoke detection systems and equipment, fire hydrants, fixtures, walls (interior and exterior), foundations, ceilings, roofs, floors, windows, doors, plate glass, skylights, landscaping, driveways, parking lots, fences, retaining walls, signs, sidewalks and parkways located in, on, about, or adjacent to the Premises. Lessee shall not cause or permit any Hazardous Substance to be spilled or released in, on, under or about the Premises (including through the plumbing or sanitary sewer system) and shall promptly, at Lessee’s expense, take all investigatory and/ore remedial action reasonably recommended, whether or not formally ordered or required, for the cleanup of any contamination of, and for the maintenance, security and/or monitoring of, the Premises, the elements surrounding same, or neighboring properties that was caused or materially contributed to by Lessee, or pertaining to or involving any Hazardous Substance and/or storage tank brought onto the premises by or for lessee or under its control. Lessee, in keeping the Premises in good order, condition and repair, shall exercise and perform good maintenance practices. Lessee’s obligations shall include restorations, replacements or renewals when necessary to keep the Promises and all improvements thereon or a part thereof in good order, condition and state of repair. If Lessee occupies the Premises for seven (7) years or more, lessor may require Lessee to repaint the exterior of the buildings on the Premises as reasonably required, but not more frequently than once every seven (7) years. (b) Lessee shall, at Lessee’s sole cost and expense, procure and maintain contracts, with copies to Lessor, in customary form and substance for, and with contractors specializing and experienced in, the inspection, maintenance and service of the following equipment and improvements, if any, located on the Premises: (i) heating, air conditioning and ventilation equipment, (ii) boiler, fired or unfired pressure vessels, (iii) fire sprinkler and/or standpipe and hose or other automatic fire extinguishing systems, including fire alarm and/or smoke detection. (iv) landscaping and irrigation systems, (v) roof covering and drain maintenance and (vi) asphalt and parking lot maintenance.

  • Equipment Installation In order to meet its obligations under this Agreement, a Party that owns, rents, or leases equipment (the equipment owner) may require installation of such equipment on property owned by another Party (the property owner), provided that the property is being used for an electric utility purpose and that the property owner shall not be required to do so if it would thereby be prevented from performing its own obligations or exercising its rights under this Agreement.