Sample Collection Procedures Clause Samples

Sample Collection Procedures. Describe how sampling points will be selected in the field, and how these locations will be documented and marked for future reference. If a sampling grid will be used, describe the dimensions and lay out planned for the grid. Outline sequentially or step-by-step the procedure for collecting a sample for each medium and each different sampling technique. Include a description of sampling equipment (including materials of construction), field measurements, sample preservation, housekeeping/ cleanliness techniques and well purging procedures. The procedure described must ensure that a representative sample is collected, and that sample handling does not result in cross contamination or unnecessary loss of contaminants. Special care in sample handling for volatile organic samples must be addressed. Method 5035 should be used for soil samples that will be analyzed for VOCs by an off- site laboratory. Describe how and when duplicates, blanks, laboratory quality control samples and background samples will be collected. If samples will be filtered, describe filtration equipment and procedures. The Owner/Operator or Respondent must include sufficient maps and tables to fully describe the sampling effort. This shall include, at a minimum, a map showing all proposed sampling locations and tables that contain the following information: Sampling Location/Interval Analytical Parameters (e.g., volatile organic compounds) Analytical Method Number Medium Preservation Method Holding Times (as specified in USEPA SW 846) Containers (quantity, size, type plus footnotes that discuss source and grade of containers) Sample Description/Area (include QC samples) Analytical Parameters Analytical Method Number Preparation or Extraction Method Number Medium Number of Sample Sites
View SourceView Similar (2)
Sample Collection Procedures. 9.1 Upon the employee’s consent, the Substance Abuse Administrator, department head, or supervisor shall assure that the employee is taken to a designated sample collection site and provides a urine sample and/or is administered an EBT. Upon a positive EBT, the employee shall provide a blood sample in addition to the required sample of urine. 9.2 In the instance of screening due to reasonable suspicion, the employee shall be driven home or to another site following collection of the sample(s). The employee shall not be returned to their vehicle. 9.3 In the instance of injury requiring medical treatment, the Substance Abuse Administrator, the sample(s) as quickly as practical. 9.4 In the case of conducting a urinalysis, the person handling the procedure should have the individual being tested unwrap and open a pre-sealed Chain of Custody Drug Testing Kit which will include the following items: Transport bag, urine specimen container, integrity seal, tamper-proof tape, and sample identification label. The individual being tested should then be escorted to the room used for sample collection. Under no circumstances should any representative, agent or designee of the City of ▇▇▇▇▇▇ directly observe the individual in the process of producing a urine sample. 9.5 In the case of conducting a blood alcohol test, in the presence of the individual being tested, the person handling the procedure should open a pre-sealed chain of custody blood alcohol testing kit which will include the following items: transport bag, blood specimen container, integrity seal, tamper-proof tape, and sample identification label. The individual being tested should be escorted to the room used to draw blood for alcohol testing. The site from which the blood will be drawn should be cleaned by a non-alcohol antiseptic wipe. Blood should be drawn by a qualified phlebotomist or other qualified nursing personnel. 9.6 After receiving an acceptable sample, the person handling the procedure, in the presence of the applicant/employee, should place the identification label on the sample container and fill in the requested information using a code number which is assigned to that specific applicant/employee and secure the sample container with tamper-proof tape. The applicant/employee and the person handling the procedure should both place their initials and the date on the tamper-proof tape, verifying that the sample was sealed in their presence.
View SourceView Similar (2)
Sample Collection Procedures. Sample collection shall be performed by trained personnel employed by NC DWQ certified laboratories in accordance with the DWQ NPDES Monitoring Coalition Program Field Monitoring Guidance Document (May 2008) and subsequent documents. The Field Monitoring Guidance Document can be found on the web at: ▇▇▇▇://▇▇▇▇▇▇.▇▇▇▇▇▇.▇▇▇/web/wq/ess/eco/coalition. Alternate collection procedures require the approval of the DWQ coalition coordinators prior to use.
View SourceView Similar (2)
Sample Collection Procedures. Sample collection shall be performed by trained personnel employed by NC DWR-certified laboratories in accordance with the DWR Monitoring Coalition Program Field Monitoring Guidance Document (November 2017) and subsequent documents. The Field Monitoring Guidance Document can be found on the web at: ▇▇▇▇://▇▇▇.▇▇.▇▇▇/about/divisions/water-resources/water-resources-data/water-sciences- home-page/ecosystems-branch/monitoring-coalition-program. Alternate collection procedures require the approval of the DWR Coalition Coordinator prior to use.
View Source
Sample Collection Procedures. SMC has developed Standard Operating Procedures (SOP) for the collection of monitoring data at the East Boulder Mine that meet standards for best practice with sample collection. These same standards are required for GNA AMP sample collection as described in Section 5 and Appendix A of the East Boulder Mine Water Resources Monitoring Plan (Operational) dated March 2018 and prepared by SMC and Hydrometrics. SMC personnel or contactors responsible for the field collection of water monitoring samples required in this AMP must follow documented, step-by-step procedures for calibration of field equipment, collection of field parameters, collection of water quality samples, and documentation. Separate samples are collected for measurement of field parameters and shipment to the laboratory for analysis. Samples collected for laboratory analysis are stored on ice immediately and preserved according to the analytical method to maintain integrity of the analytical results. Flow rate measurements are collected at the time of sample collection when conditions allow. Detailed field notes are taken at the time of sample collection, including records of field meter calibration, ambient conditions, and measurement of field parameters. Surface water samples are collected as grab samples, with care taken to suspend the sample bottle in the water to avoid entrainment with sediment. Groundwater samples are collected with the use of permanently installed submersible pumps or a portable pump, after the stagnant water is purged from the well casing. Alternatively, in many ▇▇▇▇▇ the sample can be collected using a low-flow micro- purge technique. Static water level in the monitoring well is measured prior to sample collection.
View Source
Sample Collection Procedures. Describe how sampling points will be selected in the field, and how these locations will be documented and marked for future reference. If a sampling grid will be used, describe the dimensions and layout planned for the grid. Outline sequentially or step-by-step the procedure for collecting a sample for each matrix and each different sampling technique. Include a description of sampling equipment (including materials of construction), field measurements, sample preservation, housekeeping/ cleanliness techniques and well purging procedures. The procedure described must ensure that a representative sample is collected, and that sample handling does not result in cross contamination or unnecessary loss of contaminants. Special care in sample handling for volatile organic samples must be addressed. Described how and when duplicates, blanks, laboratory quality control samples and background samples will be collected. The RFI must include sufficient maps and tables to fully describe the sampling effort. This shall include, at a minimum, a map showing all proposed sampling locations and tables that contain the following information: Sample Collection Table *Sampling Location/Interval *Analytical Parameters (e.g., volatile organic compounds) *Analytical Method Number *Matrix *Preservation Method *Holding Times *Containers (quantity, size, type plus footnotes that discuss source and grade of containers) Sample Summary Table *Sample Description/Area (include QC samples) *Analytical Parameters *Analytical Method Number *Preparation or Extraction Method Number *Matrix *Number of Sample Sites *Number of Analyses
View Source
Sample Collection Procedures 
View Source

Related to Sample Collection Procedures

  • Collection Procedures (a) On or before the Closing Date, the Seller and the Purchaser shall have established and shall maintain thereafter the system of collecting and processing Collections of Receivables in accordance with Section 2.02 of the Servicing Agreement. (b) The Seller shall cause all in-store payments to be (i) processed as soon as possible after such payments are received by the Seller but in no event later than the Business Day after such receipt, and (ii) delivered to the Servicer or, if a Daily Payment Event has occurred, deposited in the Collection Account no later than the second Business Day following the date of such receipt. (c) The Seller and the Purchaser shall deliver to the Servicer or, if a Daily Payment Event has occurred, deposit into the Collection Account all Recoveries received by it within two Business Days after the Date of Processing for such Recovery. (d) Any funds held by the Seller representing Collections of Receivables shall, until delivered to the Servicer or deposited in the Collection Account, be held in trust by the Seller on behalf of the Trustee as part of the Trust Estate. (e) The Seller hereby irrevocably waives any right to set off against, or otherwise deduct from, any Collections. (f) The Seller acknowledges that Seller shall not have any right, title or interest in and to any Trust Account.

  • Collection Procedure Escrow Agent is hereby authorized to deposit the proceeds of each wire in the Escrow Account.

  • Data Collection, Processing and Usage Personal data collected, processed and used by the Company in connection with Awards granted under the Plan includes the Grantee’s name, home address, email address, telephone number, date of birth, social insurance number or other identification number, salary, citizenship, job title, any shares of Common Stock or directorships held in the Company, and details of all Awards granted, cancelled, exercised, vested, or outstanding. In granting Awards under the Plan, the Company will collect the Grantee’s personal data for purposes of allocating shares of Common Stock in settlement of the Awards and implementing, administering and managing the Plan. The Company collects, processes and uses the Grantee’s personal data in compliance with Company’s Employment Data Protection Standards and the Uses of Employment Data for the Company’s Entities. The Grantee may exercise rights to access, correction, or restriction or deletion where applicable, by contacting the Grantee’s local HR manager or initiating a request through ▇▇▇.▇▇▇▇.gehealthcare.com.

  • Selection Procedures In selecting the Loan Assets to be Pledged pursuant to this Agreement, no selection procedures were employed which are intended to be adverse to the interests of the Lenders.

  • Election Procedures (a) Each record holder of Shares (other than Dissenting Shares, if any, Shares owned by Textron and shares to be cancelled in accordance with Section 3.1(b)) issued and outstanding immediately prior to the Effective Time shall be entitled to submit a request specifying the portion of such record holder's Shares which such record holder desires to have converted into (i) the Cash Consideration (a "Cash Election"), (ii) the Stock Consideration (a "Stock Election") or (iii) the Mixed Consideration (a "Mixed Election"), or to indicate that such record holder has no preference as to the receipt of Cash Consideration, Stock Consideration or Mixed Consideration for such Shares (a "Non-Election"). Shares in respect of which a Non-Election is made (including Shares in respect of which such an election is deemed to have been made pursuant to this Section 3.2(a) and Section 3.1(g)) (collectively, "Non-Election Shares") shall be deemed to be Shares in respect of which a Cash Election has been made. (b) Elections pursuant to Section 3.2(a) shall be made on the form of letter of transmittal and form of election (the "Letter of Transmittal and Form of Election") to be provided by the Paying Agent (as defined in Section 3.3(a)) to holders of record of Shares, together with instructions for use in effecting the surrender of the Certificates for payment therefor, as soon as practicable following the Effective Time. The Letter of Transmittal and Form of Election shall specify that delivery shall be effected, and risk of loss and title to the Certificates transmitted therewith shall pass, only upon proper delivery of the Certificates to the Paying Agent. Elections shall be made by mailing to the Paying Agent a duly completed Letter of Transmittal and Form of Election in accordance with Section 3.3(b). To be effective, a Letter of Transmittal and Form of Election must be (i) properly completed, signed and submitted to the Paying Agent at its designated office and (ii) accompanied by the Certificates representing the Shares as to which the election is being made (or by an appropriate guarantee of delivery of such Certificates by a commercial bank or trust company in the United States or a member of a registered national security exchange or of the National Association of Securities Dealers, Inc., provided such Certificates are in fact delivered to the Paying Agent within eight Trading Days after the date of execution of such guarantee of delivery). The Company shall determine, in its sole and absolute discretion, which authority it may delegate in whole or in part to the Paying Agent, whether any Letter of Transmittal and Form of Election has been properly completed, signed and submitted or revoked. The decision of the Company (or the Paying Agent, as the case may be) in such matters shall be conclusive and binding. Neither the Company nor the Paying Agent will be under any obligation to notify any person of any defect in a Letter of Transmittal and Form of Election submitted to the Paying Agent.