Source Inspections Sample Clauses

Source Inspections. Upon prior written notice to Manufacturer, Com21 or its authorized representative(s) may conduct source inspections of the Products at Manufacturer's facility at which Products are being manufactured, during Manufacturer's normal business hours. Such inspections shall be based upon IPC-A-610 Class 2; MIL STD. 105, .65 AQL, Normal Inspection, Level II; and such other standards as Com21 may reasonably elect. (Note: Com21 may require a more stringent standard (IPC-A-610 Class 3) for specific products. In that event, Com21 and Manufacturer will discuss and agree on additional charges if any. For those products, inspections shall be based on IPC-A-610 Class 2.) The Parties shall mutually agree upon the timing of such inspections, which shall be conducted in a manner that does not interfere with Manufacturer's operations. Manufacturer shall provide sufficient facilities for persons conducting such source inspections. If any Product fails the test procedure set forth in the Product Performance Specifications, Com21 may reject the entire lot of any such Products, and Manufacturer shall promptly take all steps necessary to correct such failures. Immediately upon any rejection resulting from a source inspection, Manufacturer shall identify the cause of the failure and shall promptly take all reasonable steps to correct any such failure.
View SourceView Similar (2)
Source Inspections. Upon prior notice to Solectron, Trimble or its authorized representative(s) may conduct source inspections of the Products at Solectron’s facility at which those Products are being manufactured, during Solectron’s normal business hours. Such inspections [***]; and such other standards as Trimble may reasonably elect so long as they have been duly agreed to in writing by Solectron as criteria for the manufacture of Trimble products. The Parties shall mutually agree upon the timing of such inspections, which shall be conducted in a manner that does not interfere with Solectron’s operations. Solectron shall provide sufficient facilities for persons conducting such source inspections. [***].
View Source
Source Inspections. NEC will deliver to Stratus only those Products conforming to the test and acceptance requirements specified in Appendix 2, unless it has obtained prior written approval from Stratus for a deviation. Products are subject to Stratus’ quality inspection and testing on Stratus’ premises or on NEC’s premises, at Stratus’ option. Stratus shall have the right (but not the obligation) to conduct such inspection and testing at NEC’s premises (including the facilities of NEC’s Contract Manufacturer, if applicable) on a mutually agreed as needed basis (“Source Inspection”). All Stratus Source Inspections shall be conducted during the normal business hours of NEC manufacturing facilities (including its Contract Manufacturer’s facilities) and in such a manner as not to unreasonably interfere with NEC manufacturing facilities’ normal business activities. NEC (and its Contract Manufacturer) shall provide Stratus with its reasonable cooperation and assistance in Stratus’ Source Inspections. Stratus shall be responsible for the costs and expenses relating to the Stratus employees conducting such Source Inspection. NEC’s outgoing quality rating shall be based on meeting quality goals mutually agreed to by the parties. The base quality level and measurements required for all Products will be set forth in Appendix 1. If Products do not meet the quality goal, NEC will use best commercial efforts to fix and/or improve processes and product design in the areas causing the deficiencies. The fact that Stratus may perform its own tests on the Products delivered under this Agreement shall not relieve NEC from any of its obligations under this Agreement.
View Source
Source Inspections. Upon prior notice to Solectron, Trimble or its authorized representative(s) may conduct source inspections of the Products at Solectron's facility at which Products are being manufactured, during Solectron's normal business hours. Such inspections shall be based upon [*] and such other standards as Trimble may reasonably elect. The Parties shall mutually agree upon the timing of such inspections, which shall be conducted in a manner that does not interfere with Solectron's operations. Solectron shall provide sufficient facilities for persons conducting such source inspections. If any Product fails the test procedure set forth in the Manufacturing Standards, Trimble may reject the entire lot of any such Products, and Solectron shall promptly take all steps necessary to correct such failures. Immediately upon any rejection resulting from a source inspection, Solectron shall identify the cause of the failure and shall promptly take all reasonable steps to correct any such failure as described in the Manufacturing Specifications.
View Source

Related to Source Inspections

  • Site Inspections Grantees must ensure by site inspections that facilities on the Project site are being operated and maintained for outdoor recreation for a minimum period of twenty-five (25) years from the Project Completion Date set forth in the Project Completion Certificate. The Project site must be open at reasonable times and must be managed in a safe and attractive manner.

  • Tests and Inspections § 15.5.1 Tests, inspections and approvals of portions of the Work shall be made as required by the Design-Build Documents and by applicable laws, statutes, ordinances, codes, rules and regulations or lawful orders of public authorities. Unless otherwise provided, the Design-Builder shall make arrangements for such tests, inspections and approvals with an independent testing laboratory or entity acceptable to the Owner, or with the appropriate public authority, and shall bear all related costs of tests, inspections and approvals. The Design-Builder shall give the Owner timely notice of when and where tests and inspections are to be made so that the Owner may be present for such procedures. The Owner shall bear costs of (1) tests, inspections or approvals that do not become requirements until after bids are received or negotiations concluded, and (2) tests, inspections or approvals where building codes or applicable laws or regulations prohibit the Owner from delegating their cost to the Design-Builder. § 15.5.2 If the Owner determines that portions of the Work require additional testing, inspection or approval not included under Section 15.5.1, the Owner will instruct the Design-Builder to make arrangements for such additional testing, inspection or approval by an entity acceptable to the Owner, and the Design-Builder shall give timely notice to the Owner of when and where tests and inspections are to be made so that the Owner may be present for such procedures. Such costs, except as provided in Section 15.5.3, shall be at the Owner’s expense. § 15.5.3 If such procedures for testing, inspection or approval under Sections 15.5.1 and 15.5.2 reveal failure of the portions of the Work to comply with requirements established by the Design-Build Documents, all costs made necessary by such failure shall be at the Design-Builder’s expense. § 15.5.4 Required certificates of testing, inspection or approval shall, unless otherwise required by the Design-Build Documents, be secured by the Design-Builder and promptly delivered to the Owner. § 15.5.5 If the Owner is to observe tests, inspections or approvals required by the Design-Build Documents, the Owner will do so promptly and, where practicable, at the normal place of testing. § 15.5.6 Tests or inspections conducted pursuant to the Design-Build Documents shall be made promptly to avoid unreasonable delay in the Work.

  • Visits and Inspections The Parent and the Borrower shall, and shall cause each Subsidiary to, permit representatives or agents of any Lender or the Agent, from time to time after reasonable prior notice if no Event of Default shall be in existence, as often as may be reasonably requested, but only during normal business hours and at the expense of such Lender or the Agent (unless a Default or Event of Default shall exist, in which case the exercise by the Agent or such Lender of its rights under this Section shall be at the expense of the Borrower), as the case may be, to: (a) visit and inspect all properties of the Parent, the Borrower or such Subsidiary to the extent any such right to visit or inspect is within the control of such Person; (b) inspect and make extracts from their respective books and records, including but not limited to management letters prepared by independent accountants; and (c) discuss with its officers and employees, and its independent accountants, its business, properties, condition (financial or otherwise), results of operations and performance. If requested by the Agent, the Parent and the Borrower shall execute an authorization letter addressed to its accountants authorizing the Agent or any Lender to discuss the financial affairs of the Parent and any Subsidiary with its accountants.

  • Audits and Inspections At any time during normal business hours and as often as the City may deem necessary, Service Provider shall make available to the City for the City’s examination all of Service Provider’s records and documents with respect to all matters covered by this Agreement and, furthermore, Service Provider will permit the City to audit, examine and make copies, excerpts or transcripts from such records, and to make audits of all contracts, invoices, materials, payrolls, records of personnel, conditions of employment and other data relating to all matters covered by this Agreement.

  • Audits/Inspections Contractor agrees to permit the County’s Auditor-Controller or the Auditor- Controller’s authorized representative (including auditors from a private auditing firm hired by the County) access during normal working hours to all books, accounts, records, reports, files, financial records, supporting documentation, including payroll and accounts payable/receivable records, and other papers or property of Contractor for the purpose of auditing or inspecting any aspect of performance under this Contract. The inspection and/or audit will be confined to those matters connected with the performance of the Contract including, but not limited to, the costs of administering the Contract. The County will provide reasonable notice of such an audit or inspection. The County reserves the right to audit and verify the Contractor’s records before final payment is made. Contractor agrees to maintain such records for possible audit for a minimum of three years after final payment, unless a longer period of records retention is stipulated under this Contract or by law. Contractor agrees to allow interviews of any employees or others who might reasonably have information related to such records. Further, Contractor agrees to include a similar right to the County to audit records and interview staff of any subcontractor related to performance of this Contract. Should the Contractor cease to exist as a legal entity, the Contractor’s records pertaining to this Contract shall be forwarded to the County’s project manager.