Caged Sample Clauses

Caged. At DSLi’s expense, DSLi may arrange with a Supplier certified by BellSouth (“Certified Supplier”) to construct a collocation arrangement enclosure in accordance with BellSouth’s guidelines and specifications prior to starting equipment installation. BellSouth will provide guidelines and specifications upon request. Where local building codes require enclosure specifications more stringent than BellSouth’s standard enclosure specification, DSLi and DSLi’s Certified Supplier must comply with the more stringent local building code requirements. DSLi’s Certified Supplier shall be responsible for filing and receiving any and all necessary permits and/or licenses for such construction. BellSouth shall cooperate with DSLi and provide, at DSLi’s expense, the documentation, including existing building architectural drawings, enclosure drawings, and specifications required and necessary for DSLi to obtain the zoning, permits and/or other licenses. DSLi’s Certified Supplier shall ▇▇▇▇ DSLi directly for all work performed for DSLi pursuant to this Attachment and BellSouth shall have no liability for nor responsibility to pay such charges imposed by the DSLi’s Certified Supplier. DSLi must provide the local BellSouth building contact with two Access Keys used to enter the locked enclosure. Except in case of emergency, BellSouth will not access DSLi’s locked enclosure prior to notifying DSLi. Upon request, BellSouth shall construct the enclosure for DSLi. 3.2.1 BellSouth may elect to review DSLi’s plans and specifications prior to allowing construction to start to ensure compliance with BellSouth’s guidelines and specifications. Notification to DSLi indicating BellSouth’s desire to execute this review will be provided in BellSouth’s response to the Initial Application, if DSLi has indicated their desire to construct their own enclosure. If DSLi’s Initial Application Version 3Q01: 10/22/01 does not indicate their desire to construct their own enclosure, but their subsequent firm order does indicate their desire to construct their own enclosure, then notification to review will be given within ten (10) calendar days after the Firm Order date. . BellSouth shall complete its review within fifteen (15) calendar days after the receipt of the plans and specifications. Regardless of whether or not BellSouth elects to review DSLi’s plans and specifications, BellSouth reserves the right to inspect the enclosure after construction to make sure it is constructed according to the su...
Caged. Sprint will authorize the enclosure of CLEC’s equipment and facilities at CLEC’s option. Sprint will provide guidelines and specifications upon request. Based on CLEC’s request, space and cage enclosures in amounts as small as that sufficient to house and maintain a single rack or bay or equipment will be made available. At CLEC’s option, Sprint will permit CLEC to arrange with a third party vendor to construct a Collocation Arrangement enclosure at CLEC’s sole expense. If CLEC is the first CLEC in a Sprint Premises, CLEC will not be responsible for the entire cost of site preparation and security. CLEC’s third party vendor will be responsible for filing and receiving any and all necessary permits and/or licenses for such construction. The third party vendor shall ▇▇▇▇ ▇▇▇▇ directly for all work performed for CLEC and Sprint will have no liability for nor responsibility to pay such charges imposed by the third party vendor. CLEC must provide the local Sprint building contact with one Access key used to enter the locked enclosure. Except in case of emergency, Sprint will not access CLEC’s locked enclosure prior to notifying CLEC and obtaining authorization. 87.2.1. Sprint has the right to review CLEC’s plans and specifications prior to allowing construction to start. Sprint will complete its review within fifteen (15) calendar days. Sprint has the right to inspect the enclosure after construction to make sure it is constructed according to the submitted plans and specifications. Sprint can require CLEC to remove or correct, at its cost, any structure that does not meet these plans.
Caged. At DukeNet’s expense, DukeNet may arrange with a Supplier certified by BellSouth (“BellSouth Certified Supplier”) to construct a collocation arrangement enclosure, where technically feasible as that term has been defined by the FCC, in accordance with BellSouth’s Technical References (TR) (“Specifications”) prior to starting equipment installation. BellSouth will provide Specifications upon request. DukeNet’s BellSouth Certified Supplier shall be responsible for filing and receiving any and all necessary permits and/or licenses for such construction. BellSouth shall cooperate with DukeNet and provide, at DukeNet’s expense, the documentation, including existing building architectural drawings, enclosure drawings, and Specifications required and necessary for DukeNet’s BellSouth Certified Supplier to obtain the zoning, permits and/or other licenses. DukeNet’s BellSouth Certified Supplier shall bill DukeNet directly for all work performed for DukeNet pursuant to this Attachment and BellSouth shall have no liability for nor responsibility to pay such charges imposed by DukeNet’s BellSouth Certified Supplier. DukeNet must provide the local BellSouth Remote Site Location contact with two Access Keys used to enter the locked enclosure. Except in case of emergency, BellSouth will not access DukeNet’s locked enclosure prior to notifying DukeNet at least forty-eight (48) hours before access to the Remote Site Location is required. Upon request, BellSouth shall construct the enclosure for DukeNet. 3.2.1 BellSouth may elect to review DukeNet’s plans and specifications prior to allowing construction to start to ensure compliance with BellSouth’s Specifications. Notification to DukeNet indicating ▇▇▇▇▇▇▇▇▇’s desire to execute this review will be provided in BellSouth’s response to the Application, if DukeNet has indicated their desire to construct their own enclosure. If DukeNet’s Application does not indicate their desire to construct their own enclosure, but their firm order does indicate their desire to construct their own enclosure, then notification to review will be given within ten (10) calendar days after the Firm Order date. BellSouth shall complete its review within fifteen (15) calendar days after the receipt of the plans and specifications. Regardless of whether or not BellSouth elects to review DukeNet’s plans and specifications, BellSouth reserves the right to inspect the enclosure after construction to make sure it is constructed according to the submitte...
Caged a form of collocation which allows Comcast to lease caged floor space to house their equipment within Windstream Wire Centers or access tandems pursuant to this attachment. The minimum floor space requirement for caged collocation is 100 sq. feet.
Caged. Sprint will authorize the enclosure of CLEC’s equipment and facilities at CLEC’s option. Sprint will provide guidelines and specifications upon request. Based on CLEC’s request, space and cage enclosures in amounts as small as that sufficient to house and maintain a single rack or bay or equipment will be made available. At CLEC’s option, Sprint will permit CLEC to arrange with a third party vendor to construct a Collocation Arrangement enclosure at CLEC's sole expense. If CLEC is the first CLEC in a Sprint Premises, CLEC will not be responsible for the entire cost of site preparation and security. CLEC's third party vendor will be responsible for filing and receiving any and all necessary permits and/or licenses for such construction. The third party vendor shall ▇▇▇▇ ▇▇▇▇ directly for all work performed for CLEC and Sprint will have no liability for nor responsibility to pay such charges imposed by the third party vendor. CLEC must provide the local Sprint building contact with one Access key used to enter the locked enclosure. Except in case of emergency, Sprint will not access CLEC's locked enclosure prior to notifying CLEC and obtaining authorization.

Related to Caged

  • Check Meters Developer, at its option and expense, may install and operate, on its premises and on its side of the Point of Interconnection, one or more check meters to check Connecting Transmission Owner’s meters. Such check meters shall be for check purposes only and shall not be used for the measurement of power flows for purposes of this Agreement, except as provided in Article 7.4 below. The check meters shall be subject at all reasonable times to inspection and examination by Connecting Transmission Owner or its designee. The installation, operation and maintenance thereof shall be performed entirely by Developer in accordance with Good Utility Practice.

  • Classrooms The Board shall be responsible for maintaining a standard of cleanliness in each teacher’s classroom.

  • Sites 11.1 To enable Digital Origin to fulfill its obligations under any Contract: 11.1.1 the Client shall permit or procure permission for Digital Origin and any other person(s) authorised by Digital Origin to have reasonable access to the Client’s Sites, Equipment and/or Leased Equipment and any other relevant telephone system and other equipment and shall provide such reasonable assistance as Digital Origin requests. 11.1.2 Digital Origin will normally carry out work by appointment and during Normal Working Hours but may request the Client to (and the Client shall) provide access at other times. In the event that the Client cancels, reschedules or misses any pre-arranged appointment, it shall be liable to Digital Origin for any costs and expenses which Digital Origin incurs as a result of such cancellation, rescheduling and/or missed appointment. 11.2 At the Client’s request, Digital Origin may agree (at its sole discretion) to work outside Normal Working Hours and the Client shall pay Digital Origin’s reasonable charges for complying with such a request. 11.3 The Client warrants, represents and undertakes that it has adequate health and safety provisions in place at its Sites. 11.4 The Client shall procure all consents, licences and permissions necessary from landlords or other third parties for the carrying out of preparation work, installation of Equipment and/or Leased Equipment and for the provision, use and operation of the Equipment and/or Leased Equipment and/or Services at the Sites (save to the extent Digital Origin has agreed in writing to do it). 11.5 In the event that the Client is not able to procure the necessary consent to provide the Services within ninety days of the Connection Date Digital Origin will be able to terminate the Contract forthwith by giving the Client written notice without any liability. If the Client has not managed to procure the necessary consents and Digital Origin has commenced work the Client shall, on request by Digital Origin, refund to Digital Origin the cost of all such work (including, without limitation, staff costs and equipment costs) of an amount no less than £500 as Early Termination Charges. 11.6 The Client shall provide Digital Origin with the site and building plans (to include full details of all internal cabling runs) of the Sites and provide Digital Origin with full details of all other services in the vicinity of the proposed works. 11.7 The Client is responsible for making the Site good after any work undertaken by Digital Origin at a Site, including without limitation replacing and re-siting items and for re-decorating. 11.8 If the Client is moving a Site, Digital Origin must be informed as soon as is reasonably practicable so that suitable arrangements can be made to transfer the Client’s Services and Equipment and/or Leased Equipment. Unless otherwise requested, Digital Origin, in addition to moving the Service and Equipment and/or Leased Equipment, will also endeavour (but cannot guarantee that it will be able, for example where the Client moves to a different exchange) to retain the Client’s relevant existing telephone number(s). If Digital Origin can transfer the Client’s existing number(s) to the new Site the existing Contract will continue under the same terms and conditions. If Digital Origin cannot transfer the Client’s existing number(s) to the new Site, installation of a new line will be required at the new Site, or if the Client requires any additional new lines, this will attract new line connection charges and a new Contract. 11.9 If the new installation or moving Site involves the visit of an engineer to facilitate the new installation the Client will be responsible for the costs incurred by Digital Origin for the appointment together with an administration fee in respect of any additional works required to be undertaken by Digital Origin to complete the transfer of the Services and Equipment and/or Leased Equipment. 11.10 If the Client moves Sites and leaves the Equipment and/or Leased Equipment for the new owner/tenant the Client is required to inform them that the Service will be discontinued if Digital Origin is not contacted by the new owner/tenant within 72 hours for the purpose of entering into a new contract with Digital Origin for such services and subject in any event to the agreement of such a contract. 11.11 If at the new Site the Client receives services from an alternative supplier the Client is responsible for any contractual agreement the Client has with them and any liabilities the Client may incur for terminating such agreement.

  • Site Lands or areas indicated in the Contract Documents as being furnished by the Owner upon which the Work is to be performed, including rights-of-way and easements for access thereto, and such other lands furnished by the Owner that are designated for the use of the Contractor. Also referred to as Project Site, Job Site and Premises.

  • Classroom Management The certificated classroom teacher demonstrates a competent level of knowledge 48 and skill in organizing the physical and human elements in the educational setting. 49