Integrated System Test Sample Clauses

Integrated System Test. Test of dynamic function and operation of multiple systems. Integrated System Tests are conducted under various modes, such as fire alarm and emergency situations, life safety conditions, power failure, etc. Systems are integrally operated through all specified sequences of operation. Components are verified to be responding in accordance with Contract Documents. Integrated System Tests are executed after Functional Performance Tests are complete and prior to Substantial Completion. Integrated System Tests provide verification that the integrated systems will properly function according to the Contract Documents.
View SourceView Similar (3)
Integrated System Test. The integrated system test shall verify the stability of the system hardware and software after the functional performance test has been successfully completed. During the integrated system test, all functions shall run concurrently and all AMISP-supplied equipment shall operate for a continuous 100-hour period. This minimum level of activity may be augmented, by other activities that represent normal day-to-day operation of the system as long as these activities are conducted in accordance with the documentation provided with the system. These other activities may include, but shall not be limited to, database, display, and report modifications, software development activities, configuration changes (including user-commanded server and device failovers), and the execution of any function described in this Specification. The integrated system test shall ensure that the computer system is free of improper interactions between software and hardware while the system is operating as an integrated unit. In case during the 100-hour period testing, un-commanded functional restart or server or device fail occurs the test shall be extended by 24 hours each time such a fail over occurs. Further the test shall not be conducted with the failed device. Unstructured Testing Periods of unstructured testing shall be allocated to allow AMISP to verify proper operation of the systems under conditions not specifically included in the test procedures. Unstructured testing shall be conducted in compliance with the following conditions: A minimum of 25 percent of the actual test period shall be reserved for unstructured test of the system The AMISP's test and QA/QC representative shall be present during unstructured test periods All simulation software, test cases, and other test facilities used during the structured portions of the factory tests shall be available for use during unstructured testing Unstructured testing shall not begin prior to the start of the functional performance test Unstructured testing shall be allowed at the discretion of QA/QC both at the end of a structured test segment and after completion of the functional performance test. Despatch of Material to Site The Material Inspection Clearance Certificate (MICC) for all hardware shall be issued only after successful completion of FAT as per specification. At least 10 Field Devices for each protocol shall relate to each central system and the remaining Field devices shall be simulated in the factory test en...
View Source
Integrated System Test. CONTRACTOR shall have electronic PCRs downloaded from the Field site server to the TEMIS Central database.
View Source
Integrated System Test. CONTRACTOR shall have all EMS PCR records received under Section I.C.1 (Functional Test) above processed through the TEMIS Scanning Solution program.
View Source
Integrated System Test. CONTRACTOR shall clear database from data entered in the Functional Test.
View Source
Integrated System Test. 38 4.3.3 Electro Magnetic Compatibility (EMC) Test...............40 4.3.4 RF Health Check.........................................40 4.3.5 Electro Static Discharge (ESD) Test.....................41 4.3.6 Spacecraft Alignment Test...............................43 4.3.7
View Source
Integrated System Test. 1A The initial Integrated System Test (IST-1) is performed to verify specified operation of the spacecraft subsystems prior to application of environmental tests. This test provides a reference baseline of test data to which subsequent performance test results will be compared during and after environmental tests. Because the antennas are not installed on the spacecraft until after the thermal vacuum test, the IST-1 is broken into two parts designated IST-1A and IST-1B. IST-IB is conducted after the antennas are installed subsequent to the thermal test. IST-1A consists of initial alignments of subsystem support module (SSM) equipment a propulsion functional test and the performance test. Tables 6.1-1 through 6.1-4, Spacecraft Protoflight and Acceptance Test Matrices, describe the system level tests to be performed on the various subsystems during the IST-1A and subsequent system tests. Shown vertically on the left of each matrix are the major activities in the test sequence. Shown horizontally at the top of each matrix, organized by subsystem, are the measurements to be performed during the indicated activities. The places in the sequence where these test measurements are made are denoted by an X, or other symbol as defined in footnotes. Tables 6.1-5 through 6.1-13, at the end of this section, contain descriptions of the spacecraft test configurations. The test configurations are also keyed to the system test matrices.
View Source
Integrated System Test. 1B Interated Systems Test-1B (IST-1B) is conducted after antenna installation and initial alignment. 6.3.1 BASELINE ANTENNA INSTALLATION AND ALIGNMENTS *
View Source

Related to Integrated System Test

  • System Upgrades The Connecting Transmission Owner shall procure, construct, install, and own the System Upgrade Facilities and System Deliverability Upgrades described in Attachment 6 of this Agreement. To the extent that design work is necessary in addition to that already accomplished in the Class Year Interconnection Facilities Study for the Interconnection Customer, the Connecting Transmission Owner shall perform or cause to be performed such work. If all the Parties agree, the Interconnection Customer may construct System Upgrade Facilities and System Deliverability Upgrades. 5.2.1 As described in Section 32.3.5.3 of the SGIP in Attachment Z of the ISO OATT, the responsibility of the Interconnection Customer for the cost of the System Upgrade Facilities and System Deliverability Upgrades described in Attachment 6 of this Agreement shall be determined in accordance with Attachment S of the ISO OATT, as required by Section 32.3.5.3.2

  • System Logging The system must maintain an automated audit trail which can 20 identify the user or system process which initiates a request for PHI COUNTY discloses to 21 CONTRACTOR or CONTRACTOR creates, receives, maintains, or transmits on behalf of COUNTY, 22 or which alters such PHI. The audit trail must be date and time stamped, must log both successful and 23 failed accesses, must be read only, and must be restricted to authorized users. If such PHI is stored in a 24 database, database logging functionality must be enabled. Audit trail data must be archived for at least 3 25 years after occurrence.

  • Required hardware and software The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found here: ▇▇▇▇▇://▇▇▇▇▇▇▇.▇▇▇▇▇▇▇▇.▇▇▇/guides/signer-guide- signing-system-requirements.

  • Random Testing Notwithstanding any provisions of the Collective Agreement or any special agreements appended thereto, section 4.6 of the Canadian Model will not be applied by agreement. If applied to a worker dispatched by the Union, it will be applied or deemed to be applied unilaterally by the Employer. The Union retains the right to grieve the legality of any imposition of random testing in accordance with the Grievance Procedure set out in this Collective Agreement.

  • Meter Testing Company shall provide at least twenty-four (24) hours' notice to Seller prior to any test it may perform on the revenue meters or metering equipment. Seller shall have the right to have a representative present during each such test. Seller may request, and Company shall perform, if requested, tests in addition to the every fifth-year test and Seller shall pay the cost of such tests. Company may, in its sole discretion, perform tests in addition to the fifth year test and Company shall pay the cost of such tests. If any of the revenue meters or metering equipment is found to be inaccurate at any time, as determined by testing in accordance with this Section 10.2 (Meter Testing), Company shall promptly cause such equipment to be made accurate, and the period of inaccuracy, as well as an estimate for correct meter readings, shall be determined in accordance with Section 10.3 (Corrections).