Quality Control Systems Sample Clauses

POPULAR SAMPLE Copied 1 times
Quality Control Systems. A Quality Control/Assurance framework, including comprehensive Standard Operating Procedures (SOPs) designed to carry out specific cannabis production methods in compliance with GPP and Israeli Ministry of Health requirements. Maintains operational consistency and compliance while allowing IP methods to achieve their desired outputs.
View SourceView Similar (2)
Quality Control Systems. All of Fugro’s management processes and procedures meet or exceed ISO9001:2008 standards for quality project management, a very rigorous, industry-based standard, which requires annual audit and certification compliance with project management processes and procedures. All procedures that will be used in the completion of this project have been documented and are audited in accordance with ISO9001:2008 project management requirements. Fugro’s investment in these quality management standards is designed to ensure that product quality and project metrics (i.e. schedule, performance) are rigorously evaluated and maintained throughout every stage of the project’s lifecycle. Each of our key personnel listed for this project are responsible for defining and communicating quality procedures and standards within their departments, and ensuring that their staff take the appropriate steps to monitor and maintain quality during every phase, from data acquisition through production and final delivery. In a business where technology and the associated production processes are constantly changing and improving, it is imperative that procedures, forms, and metrics are constantly reviewed and updated. The following bullets are key components to Fugro’s quality management system that will be an integral part of Fugro’s approach to this project.  Criteria for Remedial Action - Production processes are based on decades of successful completion of projects and contain elements that have been incorporated in response to both internal and customer specified requests. Anytime a new specification or new production process is introduced, the criteria for remedial action must be reviewed and modified to reflect a change in approach. The Fugro team will work with the RCMPO to identify any specific requirements where criteria must be added or modified to ensure the success of this project.  Remedial Actions - Any quality issue is of immediate concern and must be mitigated at the earliest possible opportunity in order to maintain the project’s production schedule. The quality management system has procedures that are part of the project management process to verify that the project plan has addressed all of the project’s specifications, which eliminates many quality-related issues as the project progresses. The RCMPO will be an integral part of the planning process and will have input into the quality control routines that must be part of plan for imagery production using any of the...
View SourceView Similar (3)
Quality Control Systems. FSL shall maintain or cause its subcontractors to maintain ISO9001:2008 and ISO/TS 16949:2009-compliant quality control systems at each Manufacturing Facility in order to ensure that the Wafers to be manufactured by FSL shall conform to the applicable Specifications in all material respects. Without limiting the foregoing, if any material non-compliance is found in any audit for ISO/TS 16949 compliance that could reasonably affect the maintenance of ISO/TS 16949:2009 certification at any Manufacturing Facility, and if FSL reasonably believes that it will not be able to cure such material non-compliance within the period specified by the auditor, FSL shall promptly provide the details of such non-compliance to Spansion.
View SourceView Similar (2)
Quality Control Systems. FSL shall maintain or cause its subcontractors to maintain ISO9001:2008 and ISO/TS 16949:2009-compliant quality control systems at each Sort Facility in order to ensure that the Sort Services to be performed by FSL shall conform to the applicable Specifications in all material respects. Without limiting the foregoing, if any material non-compliance is found in any audit for ISO/TS 16949 compliance that could reasonably affect the maintenance of ISO/TS 16949:2009 certification at any Sort Facility, and if FSL reasonably believes that it will not be able to cure such material non-compliance within the period specified by the auditor, FSL shall promptly provide the details of such non-compliance to Spansion.
View Source
Quality Control Systems. Seller shall provide and maintain a quality control system acceptable to Buyer for the Goods covered by this Order. If an “end use” is identified on this Order, the appropriate and applicable quality requirements will be utilized. In accordance with all Corporate Laws, Buyer certifies that they are NOT ON ANY DENIED PARTY/EMBARGO LIST or Debarred. Seller shall permit Buyer to review Seller’s procedures, practices, processes and related documents to determine such acceptability. All ITAR restricted drawings, documents,specifications, and other technical data are to be soley reviewed by US Citizens and Seller will certify to this criteria upon acceptance of the Order. Seller agrees that if a part or specification control number document is referenced in the Order, it will immediately, upon receipt, advise Buyer of any change in or to the design, configuration or performance characteristics of the Goods identified in the document and the materials or manufacturing processes utilized in the production of such Goods. Changes to be reported are those which may have been made subsequent to the date of publication of any descriptive catalogs, bulletins or data sheets referenced in the control document.
View Source
Quality Control Systems. The IRO shall perform a review of Greenway’s internal quality control systems, including, but not limited to systems designed to ensure that:‌
View Source

Related to Quality Control Systems

  • Quality control system (i) The Contractor shall establish a quality control mechanism to ensure compliance with the provisions of this Agreement (the “Quality Assurance Plan” or “QAP”). (ii) The Contractor shall, within 30 (thirty) days of the Appointed Date, submit to the Authority’s Engineer its Quality Assurance Plan which shall include the following: (a) organisation, duties and responsibilities, procedures, inspections and documentation; (b) quality control mechanism including sampling and testing of Materials, test frequencies, standards, acceptance criteria, testing facilities, reporting, recording and interpretation of test results, approvals, check list for site activities, and proforma for testing and calibration in accordance with the Specifications for Road and Bridge Works issued by MORTH, relevant IRC specifications and Good Industry Practice; and (c) internal quality audit system. The Authority’s Engineer shall convey its approval to the Contractor within a period of 21 (twenty-one) days of receipt of the QAP stating the modifications, if any, required, and the Contractor shall incorporate those in the QAP to the extent required for conforming with the provisions of this Clause 11.2. (iii) The Contractor shall procure all documents, apparatus and instruments, fuel, consumables, water, electricity, labour, Materials, samples, and qualified personnel as are necessary for examining and testing the Project Assets and workmanship in accordance with the Quality Assurance Plan. (iv) The cost of testing of Construction, Materials and workmanship under this Article 11 shall be borne by the Contractor.

  • CONTROL SYSTEM (a) SELLER shall provide and maintain a quality control system to an industry recognized Quality Standard and in compliance with any other specific quality requirements identified in this Contract. (b) Records of all quality control inspection work by SELLER shall be kept complete and available to LOCKHEED ▇▇▇▇▇▇ and its customers.

  • Quality Control A. Controlled Affiliate agrees to use the Licensed Marks and Name only in connection with the licensed services and further agrees to be bound by the conditions regarding quality control shown in attached Exhibit A as they may be amended by BCBSA from time-to-time. B. Controlled Affiliate agrees to comply with all applicable federal, state and local laws. C. Controlled Affiliate agrees that it will provide on an annual basis (or more often if reasonably required by Plan or by BCBSA) a report or reports to Plan and BCBSA demonstrating Controlled Affiliate’s compliance with the requirements of this Agreement including but not limited to the quality control provisions of this paragraph and the attached Exhibit A. D. Controlled Affiliate agrees that Plan and/or BCBSA may, from time-to-time, upon reasonable notice, review and inspect the manner and method of Controlled Affiliate’s rendering of service and use of the Licensed Marks and Name. E. As used herein, a Controlled Affiliate is defined as an entity organized and operated in such a manner, that it meets the following requirements: (1) A Plan or Plans authorized to use the Licensed Marks in the Service Area of the Controlled Affiliate pursuant to separate License Agreement(s) with BCBSA, other than such Controlled Affiliate’s License Agreement(s), (the “Controlling Plan(s)”), must have the legal authority directly or indirectly through wholly-owned subsidiaries to select members of the Controlled Affiliate’s governing body having not less than 50% voting control thereof and to: (a) prevent any change in the articles of incorporation, bylaws or other establishing or governing documents of the Controlled Affiliate with which the Controlling Plan(s) do(es) not concur; (b) exercise control over the policy and operations of the Controlled Affiliate at least equal to that exercised by persons or entities (jointly or individually) other than the Controlling Plan(s); and Notwithstanding anything to the contrary in (a) through (b) hereof, the Controlled Affiliate’s establishing or governing documents must also require written approval by the Controlling Plan(s) before the Controlled Affiliate can: (i) change its legal and/or trade names; (ii) change the geographic area in which it operates; (iii) change any of the type(s) of businesses in which it engages; (iv) create, or become liable for by way of guarantee, any indebtedness, other than indebtedness arising in the ordinary course of business; (v) sell any assets, except for sales in the ordinary course of business or sales of equipment no longer useful or being replaced; (vi) make any loans or advances except in the ordinary course of business; (vii) enter into any arrangement or agreement with any party directly or indirectly affiliated with any of the owners or persons or entities with the authority to select or appoint members or board members of the Controlled Affiliate, other than the Plan or Plans (excluding owners of stock holdings of under 5% in a publicly traded Controlled Affiliate); (viii) conduct any business other than under the Licensed Marks and Name; (ix) take any action that any Controlling Plan or BCBSA reasonably believes will adversely affect the Licensed Marks and Name. In addition, a Plan or Plans directly or indirectly through wholly owned subsidiaries shall own at least 50% of any for-profit Controlled Affiliate. (2) A Plan or Plans authorized to use the Licensed Marks in the Service Area of the Controlled Affiliate pursuant to separate License Agreement(s) with BCBSA, other than such Controlled Affiliate’s License Agreement(s), (the “Controlling Plan(s)”), have the legal authority directly or indirectly through wholly-owned subsidiaries to select members of the Controlled Affiliate’s governing body having more than 50% voting control thereof and to: (a) prevent any change in the articles of incorporation, bylaws or other establishing or governing documents of the Controlled Affiliate with which the Controlling Plan(s) do(es) not concur; (b) exercise control over the policy and operations of the Controlled Affiliate. In addition, a Plan or Plans directly or indirectly through wholly-owned subsidiaries shall own more than 50% of any for-profit Controlled Affiliate.

  • Quality Control Program Engineer shall have a quality control program in place that ensures that all deliverable work is of high quality. Engineer shall submit a plan detailing its program to the Inspection Branch of the TxDOT Bridge Division for review and approval prior to beginning work. State may review or audit the programs.

  • Management and Control Systems Grantee will: 1. maintain an appropriate contract administration system to ensure that all terms, conditions, and specifications are met during the term of the contract through the completion of the closeout procedures. 2. develop, implement, and maintain financial management and control systems that meet or exceed the requirements of Uniform Statewide Accounting System (UGMS). Those requirements and procedures include, at a minimum, the following: i. Financial planning, including the development of budgets that adequately reflect all functions and resources necessary to carry out authorized activities and the adequate determination of costs; ii. Financial management systems that include accurate accounting records that are accessible and identify the source and application of funds provided under each Contract of this Contract, and original source documentation substantiating that costs are specifically and solely allocable to a Contract and its Contract and are traceable from the transaction to the general ledger; iii. Effective internal and budgetary controls; iv. Comparison of actual costs to budget; determination of reasonableness, allowableness, and allocability of costs; v. Timely and appropriate audits and resolution of any findings; vi. Billing and collection policies; and vii. Mechanism capable of billing and making reasonable efforts to collect from clients and third parties.