Sample Submission Clause Samples

The Sample Submission clause outlines the requirements and procedures for providing product or material samples to another party for review or approval. Typically, this clause specifies the type, quantity, and quality standards of samples to be submitted, as well as timelines and methods for delivery. By establishing clear expectations for sample provision, the clause helps ensure that both parties agree on the characteristics of goods or materials before full-scale production or delivery, thereby reducing the risk of disputes over quality or suitability.
Sample Submission. The participating Vendor shall submit samples (each cavity if applicable) as specified by the Buyer for the Vendor's incoming Quality Assurance approval. The First Article package shall comprise information provided by the Buyer on a separate email.
View SourceView Similar (2)
Sample Submission. The Submitter will provide a completed Submission Form (the “Submission”) and the samples to be analyzed (the “Samples”). We reserve the right to decline a Submission. By making a Submission, the Submitter certifies that They are legally capable of entering into binding contracts on behalf of Themselves, Their supervisor, and/or Their Company.
View Source
Sample Submission. Samples will be submitted for laboratory analysis of VOCs via USEPA method TO-15.
View Source
Sample Submission. Client agrees to submit all samples of goods produced or sold (“Sample”) for testing (each, an “Order”) in accordance with the guidelines and minimum sample size requirements (“Minimum Sample Requirement”) as provided on the Saguaro Testing website (the “Website”). Minimum Sample Requirements may change at the discretion of Saguaro Testing; therefore, Client is responsible for confirming that each submitted Sample conforms to the Minimum Sample Requirements as provided on the Website at the time of Sample submission.
View Source
Sample Submission. Samples collected from test pits will be submitted for laboratory analysis of VOCs via USEPA Method 8260, SVOCs via USEPA Method 8270, PCBs via USEPA Method 8082 and total weight RCRA metals via USEPA Method 6010 and Method 7471. Toxicity Characteristic Leaching Procedure (TCLP) analyses will be performed on a select number of samples, determined in consultation with the NYSDEC, for those compounds documented at concentrations greater than 20 times the maximum contaminant level as specified in 40 CFR Part 261.
View Source
Sample Submission. Client shall ship Samples to SomaLogic on dry ice after submitting a completed electronic Sample Submission Form.
View Source
Sample Submission. All samples must be delivered to BGI Tech Solutions in accordance with sample requirements listed above, find more information at BGI TechSolutions Sample Submission Instructions . Once you get a project number from your BGI service representative and get ready to submit samples, please submit sample information online by following the BGI Sample Submission Guide one or two days prior to shipping. When you complete the online submission, you may send samples and a hard copy of sample information form to the address showed on the form.
View Source
Sample Submission. Samples Collected for Surface Soil Screening Samples Collected Adjacent to Electrical Transformer Samples Collected Adjacent to the Sub Station Samples Collected within Building 5A and 5B Samples Collected in Western Parking Area
View Source

Related to Sample Submission

  • BID SUBMISSION All Bids are to be packaged, sealed and submitted to the location stated in the Bid Specifications. Bidders are solely responsible for timely delivery of their Bids to the location set forth in the Bid Specifications prior to the stated Bid opening date/time. A Bid return envelope, if provided with the Bid Specifications, should be used with the Bid sealed inside. If the Bid response does not fit into the envelope, the Bid envelope should be attached to the outside of the sealed box or package with the Bid inside. If using a commercial delivery company that requires use of their shipping package or envelope, Bidder’s sealed Bid, labeled as detailed below, should be placed within the shipper’s sealed envelope to ensure that the Bid is not prematurely opened. All Bids must have a label on the outside of the package or shipping container outlining the following information: “BID ENCLOSED (bold print, all capitals) • Group Number • IFB or RFP Number • Bid Submission date and time” In the event that a Bidder fails to provide such information on the return Bid envelope or shipping material, the receiving entity reserves the right to open the shipping package or envelope to determine the proper Bid number or Product group, and the date and time of Bid opening. Bidder shall have no claim against the receiving entity arising from such opening and such opening shall not affect the validity of the Bid or the procurement. Notwithstanding the receiving agency’s right to open a Bid to ascertain the foregoing information, Bidder assumes all risk of late delivery associated with the Bid not being identified, packaged or labeled in accordance with the foregoing requirements. All Bids must be signed by a person authorized to commit the Bidder to the terms of the Bid Documents and the content of the Bid (offer).

  • Claims Submission We will submit your claims and assist you in any way we reasonably can to help get your claims paid. Your insurance company may need you to supply certain information directly. It is your responsibility to comply with their request. Please be aware that the balance of your claim is your responsibility whether or not your insurance company pays your claim. Your insurance benefit is a contract between you and your insurance company; we are not party to that contract.

  • REPORT SUBMISSION 1. Copies of reporting packages for audits conducted in accordance with 2 CFR Part 200, Subpart F-Audit Requirements, and required by PART I of this form shall be submitted, when required by 2 CFR 200.512, by or on behalf of the recipient directly to the Federal Audit Clearinghouse (FAC) as provided in 2 CFR 200.36 and 200.512 A. The Federal Audit Clearinghouse designated in 2 CFR §200.501(a) (the number of copies required by 2 CFR §200.501(a) should be submitted to the Federal Audit Clearinghouse), at the following address: Federal Audit Clearinghouse Bureau of the Census ▇▇▇▇ ▇▇▇▇ ▇▇▇▇ ▇▇▇▇▇▇ ▇▇▇▇▇▇▇▇▇▇▇▇▇▇, ▇▇ ▇▇▇▇▇ Submissions of the Single Audit reporting package for fiscal periods ending on or after January 1, 2008, must be submitted using the Federal Clearinghouse’s Internet Data Entry System which can be found at ▇▇▇▇://▇▇▇▇▇▇▇▇▇.▇▇▇▇▇▇.▇▇▇/facweb/ 2. Copies of financial reporting packages required by PART II of this Attachment shall be submitted by or on behalf of the recipient directly to each of the following: A. The Department of Environmental Protection at one of the following addresses: By Mail: Florida Department of Environmental Protection Office of Inspector General, MS 40 ▇▇▇▇ ▇▇▇▇▇▇▇▇▇▇▇▇ ▇▇▇▇▇▇▇▇▇ Tallahassee, Florida 32399-3000 Electronically: ▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇@▇▇▇.▇▇▇▇▇.▇▇.▇▇ B. The Auditor General’s Office at the following address: Auditor General Local Government Audits/342 ▇▇▇▇▇▇ ▇▇▇▇▇▇ Building, Room ▇▇▇ ▇▇▇ ▇▇▇▇ ▇▇▇▇▇▇▇ ▇▇▇▇▇▇ ▇▇▇▇▇▇▇▇▇▇▇, ▇▇▇▇▇▇▇ ▇▇▇▇▇-1450 The Auditor General’s website (▇▇▇▇://▇▇▇▇▇▇▇▇▇.▇▇▇/) provides instructions for filing an electronic copy of a financial reporting package. 3. Copies of reports or management letters required by PART III of this Attachment shall be submitted by or on behalf of the recipient directly to the Department of Environmental Protection at one of the following addresses: By Mail: Florida Department of Environmental Protection Office of Inspector General, MS 40 ▇▇▇▇ ▇▇▇▇▇▇▇▇▇▇▇▇ ▇▇▇▇▇▇▇▇▇ Tallahassee, Florida 32399-3000 Electronically: ▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇@▇▇▇.▇▇▇▇▇.▇▇.▇▇ 4. Any reports, management letters, or other information required to be submitted to the Department of Environmental Protection pursuant to this Agreement shall be submitted timely in accordance with 2 CFR 200.512, section 215.97, F.S., and Chapters 10.550 (local governmental entities) or 10.650 (nonprofit and for-profit organizations), Rules of the Auditor General, as applicable. 5. Recipients, when submitting financial reporting packages to the Department of Environmental Protection for audits done in accordance with 2 CFR 200, Subpart F-Audit Requirements, or Chapters 10.550 (local governmental entities) and 10.650 (non and for-profit organizations), Rules of the Auditor General, should indicate the date and the reporting package was delivered to the recipient correspondence accompanying the reporting package.

  • Application Submission Submissions of a rental application does not guarantee approval or acceptance. It does not bind us to accept the application or to sign a Lease contact.

  • Invoice Submission All invoices submitted by Contractor shall include the City Contract Number, an assigned Invoice Number, and an Invoice Date. City will provide Contractor with an invoice cover sheet. Invoice cover sheets are required to be accurately completed and submitted with each invoice. Contractor shall submit the original invoice, no more than once monthly, through the responsible City Project Manager at: City of Ocala Engineering Department, Attn: ▇▇▇▇ ▇▇▇▇▇▇▇▇, Address: ▇▇▇▇ ▇▇ ▇▇▇▇ ▇▇▇▇▇▇, ▇▇▇▇. ▇▇▇, ▇▇▇▇▇, ▇▇▇▇▇▇▇ ▇▇▇▇▇, E-Mail: ▇▇▇▇▇▇▇▇▇@▇▇▇▇▇▇▇.▇▇▇.