DELIVERY, INSTALLATION AND ACCEPTANCE Clause Samples

DELIVERY, INSTALLATION AND ACCEPTANCE. 9.1 The Seller shall transport the Equipment at its own cost to the place of delivery. If the shipment is intact, the Buyer shall issue delivery note for the Seller. 9.2 The Buyer shall perform the installation of the Equipment and verify whether the Equipment is functional and meets the technical requirements of Annexes No. 1 and 2 hereof. 9.3 The Buyer undertakes to perform the installation of the Equipment and verification whether the Equipment is functional and meets the technical requirements within 3 working days of the delivery of the Equipment. 9.4 The delivery shall include all technical documentation pertaining to the Equipment, user manuals and certificate of compliance of the Equipment and all its parts and accessories with approved standards. 9.5 The procedure shall be completed by acceptance of the Equipment confirmed by the acceptance protocol containing specifications of all performed tests. The protocol shall contain the following information: 9.5.1 Information about the Seller, the Buyer and any subcontractors, 9.5.2 Description of the Equipment including description of all components and serial numbers, 9.5.3 Description of performed tests including achieved parameters, 9.5.4 List of technical documentation including the manuals, 9.5.5 Date and signature of the representative of the Buyer specified in 11.2 hereof. 9.6 Acceptance of the Equipment does not release the Seller from liability for damage caused by product defects. 9.7 The Buyer shall not be obliged to accept an Equipment, which would show defects or unfinished work and which would otherwise not form a barrier, on their own or in connection with other defects, to using the Equipment. In this case, the Buyer shall issue a record containing the reason for its refusal to accept the Equipment.

DELIVERY, INSTALLATION AND ACCEPTANCE. 43.1 The provisions of article 35 with respect to delivery and installation apply mutatis mutandis. 43.2 Unless supplier is obliged, under the agreement, to host the software and/or website for client on its own computer system, supplier either delivers the software and/or website to client on a data carrier and in a form determined by supplier, or makes the software and/or website online available to client. 43.3 The provisions of article 36 of these general terms with respect to acceptance apply mutatis mutandis. 43.4 If parties make use of a development method as referred to in article 42, the provisions of article 36.1, 36.2, article 36.4 up to and including 36.9, article 36.12 and article 40.1 and 40.5 do not apply. Client accepts the software and/or website in the state it is in at the moment the last development phase ends (‘as is, where is’).

DELIVERY, INSTALLATION AND ACCEPTANCE. The Seller shall transport the Equipment at its own cost to the place of delivery. If the shipment is intact, the Buyer shall issue delivery note for the Seller. The Buyer shall perform the installation of the Equipment and verify whether the Equipment is functional and meets the technical requirements of Annexes No. 1 and 2 hereof. The Buyer undertakes to perform the installation of the Equipment and verification whether the Equipment is functional and meets the technical requirements within 3 working days of the delivery of the Equipment. The delivery shall include all technical documentation pertaining to the Equipment, user manuals and certificate of compliance of the Equipment and all its parts and accessories with approved standards. The procedure shall be completed by acceptance of the Equipment confirmed by the acceptance protocol containing specifications of all performed tests. The protocol shall contain the following information: Information about the Seller, the Buyer and any subcontractors, Description of the Equipment including description of all components and serial numbers, Description of performed tests including achieved parameters, List of technical documentation including the manuals, Date and signature of the representative of the Buyer specified in 11.2 hereof. Acceptance of the Equipment does not release the Seller from liability for damage caused by product defects. The Buyer shall not be obliged to accept an Equipment, which would show defects or unfinished work and which would otherwise not form a barrier, on their own or in connection with other defects, to using the Equipment. In this case, the Buyer shall issue a record containing the reason for its refusal to accept the Equipment.

DELIVERY, INSTALLATION AND ACCEPTANCE. The Software will be deemed irrevocably accepted upon delivery of Software.

DELIVERY, INSTALLATION AND ACCEPTANCE. 2.1 Unibet shall deliver the Service to the Company at a time which shall be agreed upon between the Parties. Unibet shall be responsible for setting up the Service. 2.2 Unibet will provide a production plan which shall be approved in writing by the Company. If standard white labelling solution is applied, Unibet shall deliver, provided that Unibet has received the design and feature description from the Company, the first version of the Service to the Company in accordance with the date of the acceptance of the production plan. The Company shall within 48 hours after delivery give notice in writing to Unibet whether the Service is accepted or not. If no such notice is given within this time period, the delivery shall be deemed as accepted by the Company. 1) The Company shall ensure that: (a) all required designing data is delivered to Unibet in a proper format which shall be agreed upon between the Parties; (b) the design follows the design implementation templates delivered by Unibet; and (c) it has all necessary permits and licenses to execute this Agreement including relevant IPR licenses and/or ownership to all copyright material it provides to Unibet to be published on Company's Web site/s. 2) Unibet shall: (a) have all relevant IPR licenses and/or ownership to all copyright material it publishes on Company's Web site/s as part of the Service; (b) implement the relevant Google Analytics code on the Company's hosted webpages to enable the Company to track its traffic and visitor statistics; (c) use its best efforts to institute reasonable Search Engine Optimization strategies as requested by the Company from time to time; (d) work with the Company to migrate the Company's existing player base to the Service in a manner causing the least possible disruption to such players' gaming experience;

DELIVERY, INSTALLATION AND ACCEPTANCE. 22.1 FP-development B.V. shall deliver the software to be developed to the Customer and install it as much as possible in accordance with the specifications recorded in writing, with installation only occurring if installation by FP-development B.V. has been agreed in writing. In the absence of express agreements in this regard, the Customer itself shall install, set up, design parameters for and tune the software and, if necessary, adjust the equipment and user environment used in this connection. Unless expressly otherwise agreed, FP-development B.V. shall not be required to convert data. 22.2 If an acceptance test has been agreed, the test period shall be 14 days after delivery or, if installation by FP-development B.V. has been agreed in writing, after the installation is completed. The Customer shall not be allowed to use the software for productive or operational purposes during the test period. FP-development B.V. may always require, hence, even if this has not been expressly agreed, that the Customer conduct a proper test of sufficient scope and depth using sufficiently qualified employees as to interim or other results of the development work and that the test results be reported to FP-development B.V. in writing and in a well-organized and comprehensible manner. 22.3 The software shall be considered accepted by the Parties: (a) if an acceptance test has not been agreed between the Parties: at the time of delivery or, if installation by FP-development B.V. has been agreed in writing, when the installation is completed, or (b) f an acceptance test has been agreed between the Parties: on the first day after the test period, or (c) if FP-development B.V. receives a test report as referred to in Article 22.5 before the end of the test period: at the time that the errors within the meaning of Article

DELIVERY, INSTALLATION AND ACCEPTANCE. Lessor or its designated ------------------------------------ representative shall arrange for delivery and installation of the Equipment at the location specified in the applicable Schedule. Lessee shall pay all costs associated with packing, transportation, taxes, duties, insurance, delivery, installation, testing and support of the Equipment. Lessor will have no liability for any delay or failure of the Seller to deliver or service the Equipment or, license any software. Acceptance shall also be deemed to occur upon the date of execution by Lessee of a Certificate of Acceptance in the form of that attached. Lessee hereby authorizes Lessor to insert in any Schedule the date of acceptance (the "Acceptance Date") for any Item of Equipment as well as such items as serial numbers and the Equipment description and cost resulting from any orders or change orders occurring after the Schedule is executed. In the event of replacement by the supplier or manufacturer of any Equipment that is determined after acceptance to be defective, the Equipment list and serial numbers on the applicable Schedule shall be deemed amended to rafted the substitute Equipment.

DELIVERY, INSTALLATION AND ACCEPTANCE. 5.1 [Pre-Delivery Testing by Developer. Before delivering and installing any Software Deliverable, Developer shall: (a) test the Software component of such Software Deliverable to confirm that it is fully operable, meets all applicable Specifications, and will function in accordance with the Specifications and Documentation when properly installed in the Operating Environment; (b) scan such Software Deliverable using the most up-to-date scanning software and definitions to confirm it is free of Harmful Code; (c) remedy any Non-Conformity or Harmful Code identified and retest and rescan the Software Deliverable; and (d) prepare, test, and, as necessary, revise the Documentation component of the Software Deliverable to confirm it is complete and accurate and conforms to all requirements of this Agreement. Customer shall have the right to be present for all pre-installation testing. Developer shall give Customer at least three (3) days’ prior notice of all such testing.]

DELIVERY, INSTALLATION AND ACCEPTANCE. 6.1 Supplier shall meet or exceed all Technical, Test and Acceptance Requirements set forth in Exhibit B with respect to the Deliverables supplied to Sprint.