License Grant and Conditions Clause Samples

License Grant and Conditions. In addition to the license grant and conditions set forth in the Agreement, the following conditions apply: 2.1 The XHQ license permits the XHQ Software to be installed on either (a) one Intel-class server with a maximum of two physical CPU sockets, or (b) a cloud hosted virtual server that is approved in writing by SISW. The usage is limited to the number of licensed Named Users and is referred to as the “production” server. 2.2 An XHQ license for a "non-production" server permits the XHQ Software to be installed on either (a) one Intel- class server with a maximum of two physical CPU sockets, or (b) a cloud hosted virtual server that is approved in writing by SISW. The installation may be used for solution development and solution testing only. The installation is limited to be accessed only by the number of Authorized Users as defined in the "non-production" product description, but otherwise has the same XHQ license options enabled as in the production server and is referred to as the “non-production” server. 2.3 The "non-production" server may not be used under any circumstance as an additional production server nor to temporarily replace a production server which may be momentarily inoperable. The sole purpose of a "non- production" server is to allow solution development or solution testing without impacting the production server. XHQ solution content updates from the development server are typically transferred to the production server in regular intervals by the solution administrator. This is needed to make the XHQ content updates accessible to the end users. 2.4 Customer may install XHQ Software on a virtual server only if the underlying hardware configuration of the underlying physical server, either alone or when used in a cluster, does not exceed the maximum capability of two physical Intel-class server CPU sockets. 2.5 If Customer intends to transfer the license key of the XHQ Software to another server it shall notify SISW with a reasonable notice period prior to the intended transfer. In such cases, SISW shall allow such transfer to another server up to three (3) times per calendar year at no charge and will issue a new license key to the Customer.

License Grant and Conditions. 1.1. DEXMA hereby grants You a worldwide, non-transferable and non-exclusive right to use the Service, (a) for Your own internal company use and (b) for providing services to Your Clients, subject to compliance with all the terms of this Agreement. All rights that are not expressly granted remain reserved to DEXMA. 1.2. As conditions of this License and unless permitted by your Partner Agreement, You may not (i) license, sublicense, sell, resell, transfer, assign, distribute or exploit commercially or in any other manner or make available to third parties the Service or any Contents, in party or whole, other than to paid-up Clients activated by You; (ii) modify or make works derived or based on the Service,; (iii) create Internet "links" to the Service or "mask" or "duplicate" the Service in or through any server or wireless or Internet-based device; or (iv) carry out any reverse engineering or access to the Service or modify the software and technology platform underlying the Service, to (a) create a competing product, software or service, (b) create a software, product or service using ideas, features, functions or graphics similar to those of the Service, or (c) copy any ideas, features, functions or graphics of the software, product or Service. 1.3. Your account is unique to You and may not be shared by anyone. Client End-User accounts may not be shared or used by more than one Client End-User, but they can be reassigned at a given moment to new Client End-User within the same Client (replacing previous Client End-Users that have finished working with the Service or changed their work status or role, and will therefore not continue using the Service). 1.4. In addition, You may not and will ensure that Your Clients will not, through or via the Service: (i) send or store material that contains software with virus, worms, trojans or codes, files, command sequences, harmful computer agents or programs; (ii) interfere or affect the integrity or performance of the Service or the data it contains; or (iii) try to obtain unauthorized access to the Service or related systems or networks. 1.5. Third party Apps. As part of the Service, DEXMA may make available to You and Your Clients the services and functionalities of certain third party Applications. Client Data will be sent to the servers of the Application providers during processing. While DEXMA will channel support for such Applications to their creators as part of the Support Terms, DEXMA assumes no liabil...

License Grant and Conditions. 2.1. If you are provided access to the Cisco Media, Data or other Cloud Service Application Programming Interfaces (“Cisco APIs”), Cisco grants You a limited, revocable, non-exclusive, non-transferable, non- sublicensable license to access, use and make calls to Cisco APIs solely during the Usage Term for the sole purpose of updating, creating, retrieving, or deleting API Accessible Data and voice recordings associated with the Cloud Service, and developing business reporting, integrations and/or implementations to Your business requirements with third-parties for consumer services. 2.2. In addition to the conditions of use set forth in Section 3 of the ▇▇▇▇, You shall not use, or allow others to use, the Cisco APIs to: (a) substantially replicate and compete with the underlying Cloud Service; (b) collect, share, resell, store, or in any way transmit API Accessible Data; (c) disable, disrupt, circumvent, interfere with, or otherwise violate the security of any Cisco product, service, or user; or (d) access any application, system, service, computer, data, account, or network without authorization. Cisco may immediately terminate Your Use of the Cloud Service if You do not comply with any part of this Section 2.2.

License Grant and Conditions. In addition to the license grant and conditions as stipulated in the Agreement, the following conditions shall apply. The XHQ license permits the licensed XHQ Software to be installed on one Intel-class server with a maximum of two physical CPU sockets only. The usage is limited to the number of licensed Named Users and/or Concurrent Users and is referred to as the “production” server. The XHQ license additionally permits the licensed XHQ Software to be installed on one Intel-class server with a maximum of two physical CPU sockets for solution development purposes only. In this case, the installation is limited to access by 10 Concurrent Users only but otherwise has the same XHQ license options enabled as in the production server and is referred to as the “development” server. The development server may not be used as an additional production server. The sole purpose of a development server is to allow solution development or solution testing without impacting the production server. XHQ solution content updates from the development server are typically transferred to the production server in regular intervals by the solution administrator in order to be accessible to the end users. Customer may not install XHQ Software on a physical Intel-class server with more than two physical CPU sockets. Customer may use a virtual server only if the underlying hardware configuration of the physical server does not exceed the licensed physical CPU socket count as described above. XHQ Software cannot be used or licensed on a virtual server where the underlying physical server, either alone or when used in a cluster, would exceed the maximum capability of two physical Intel-class server CPU sockets. If Customer intends to transfer the license key of the XHQ Software to another Server it shall notify SISW with a reasonable notice period prior to the intended transfer. In such cases, SISW shall allow such transfer to another Server up to three (3) times per calendar year at no charge and will issue a new license key to the Customer.

License Grant and Conditions. Subject to the terms of this Agreement, including but not limited to the conditions set out below in this section 1, Company grants you a limited, non-exclusive, and nontransferable license to: (a) download, install, and use the Application for your personal, non-commercial use on a single mobile device owned or otherwise controlled by you (”Mobile Device”) strictly in accordance with the Application’s documentation; and (b) access and use on such Mobile Device the Content and Services (as defined in section 5) made available in or otherwise accessible through the Application, strictly in accordance with this Agreement and the Terms of Use applicable to such Content and Services as set forth in section 5. YOU AGREE THAT THE LICENSE SHALL BE SUBJECT TO THE FOLLOWING CONDITIONS: If you intend to use the Application in your capacity as a health care professional, you acknowledge and agree that, prior to your use of the Application, you have obtained your employer’s express approval to use the Application in connection with your work as a health care professional. You acknowledge and agree that any output or results from your use of the Application, including but not limited to any PDF-reports where wound attributes are presented together with suitable Company products and education materials, is intended to provide you with information about the Company’s wound care products, instructions for use and training material based on the wound attributes you have selected. You acknowledge and agree that the Application is solely intended to be used as a reference material and is not intended for use in the diagnosis of disease or other conditions, or in the cure, mitigation, treatment, or prevention of any disease, and that the Application cannot replace the judgment of clinical personnel or performing any clinical assessment. YOU ACKNOWLEDGE AND AGREE THAT THE APPLICATION CAN NOT AND MAY NOT UNDER ANY CIRCUMSTANCES BE RELIED UPON AS MEDICAL ADVICE. You agree that the Company or any of its affiliates shall not have any liability, including but not limited to liability resulting from patient injury, which may arise from or relate to your use or misuse of the Application, as is further developed and described in section 10 of this Agreement.

License Grant and Conditions. 1. License Grant. HE grants Customer a nonexclusive, nontransferable, limited license to install and use Software and related Documentation for Customer’s internal business purposes for the time period specified in the Order, and subject to the applicable Supplemental Terms. Software is provided in object code form only, unless otherwise specified in this Agreement. Software is the trade secret of HE or its licensors. Customer may copy Software only as required to support the authorized use. Each copy must include all notices and legends embedded in Software and affixed to its medium or container as received from HE. HE or its licensors retain title to and ownership of Software and HE IP. HE reserves all rights in Products and HE IP not expressly granted herein.

License Grant and Conditions. Licensor hereby grants you a limited, non-exclusive, non-transferable, and revocable license to use the Software, provided that you have obtained a valid license from Wassa. The right to use the Software is contingent upon your purchase and subscription to a valid license from Wassa. • You may only use the Software within the scope of the license granted by Wassa. • The license must be active and valid. Your right to use the Software terminates automatically upon the expiration or revocation of the license. This license allows you to: • Download and install the virtual machine image on a compatible cloud platform (Amazon Web Services, Microsoft Azure, or Google Cloud Platform). • Use the Software solely within your organization for the purpose of processing media files in accordance with the features of BlurIt. • Use the Software in compliance with applicable local laws and regulations.

License Grant and Conditions. Subject to the terms and conditions herein, Backbase grants to Licensee a royalty free, limited, non-exclusive, non- transferable, personal right and license: (a) to install and/or use the Software as permitted herein; (b) to copy the Software solely as necessary for backup or archival purposes; and (c) reproduce any documentation accompanying the Software in connection with Licensee’s authorized use of the Software. Notwithstanding the foregoing, if Licensee is: (i) an Organization, the licensee may install and use the Software on an unlimited number of local developer Workstations and may install and use the Software on a maximum of one (1) Shared Server with a maximum of two (2) CPUs; or (ii) an Educational Institution, Licensee may install and use the Software on an unlimited number of CPUs, provided such use is solely for educational or training purposes and not for Licensee’s internal business or any commercial use. Except for the express license granted in this Section 2.1, no other licenses are granted by implication, estoppel or otherwise. Any other use requires that you acquire a commercial version of the Backbase software under the terms of the commercial Backbase End-User License Agreement. Please contact a Backbase representative for further assistance.

License Grant and Conditions. (a) License Grant. SISW grants Customer a nonexclusive, nontransferable, limited license to install and use Software and related Documentation for Customer’s biusninestseprurpnosaeslfor the time period specified in the Order, and subject to the applicable Supplemental Terms. Software is provided in object code form only, unless otherwise specified in this Agreement. Software is the trade secret of SISW or its licensors. Customer may copy Software only as required to support the authorized use. Each copy must include all notices and legends embedded in Software and affixed to its medium or container as received from SISW. SISW or its licensors retain title to and ownership of Software and SISW IP. SISW reserves all rights in Products and SISW IP not expressly granted herein.