System Attributes Sample Clauses

System Attributes. A System Attribute is a specific attribute related to GPS metadata. If you add one or more of these types of attributes to your feature, the attributes will be logged automatically using the data available from your GPS receiver, and cannot be edited by the field user. Examples of system attributes include PDOP, # of Satellites Used, etc. When logging multiple points for a feature in progress, you are only prompted for the feature and attributes for the first point. All future points for that feature are automatically associated with the original feature and attributes selected. As mentioned earlier, if no feature file is selected for a project, the project is automatically given a generic point, a generic line, and a generic area to choose from when logging points. Each of these features has one alphanumeric attribute associated with it titled Comment, which has a limit of 40 characters.
View SourceView Similar (2)
System Attributes. Except as may be provided in the Special Terms and Conditions hereto, System Owner shall at all times during the Term of this Agreement own and retain exclusive rights· to any and all Capacity, Ancillary Services, Tax Benefits, Environmental Credits and all other products or economic benefits of the System.
View SourceView Similar (2)
System Attributes. The LGC Wireless designed ▇▇▇▇ ▇, ▇, ▇▇▇ ▇ ▇▇▇▇, utilizing multiple LGCells, has the following system attributes: · Lower Cabling Cost — The LGCell’s ability to use existing multi-mode fiber for installation or expansion (when it is available) can greatly reduce the overall cost of implementation. · Faster Deployment—In the typical LGCell implementation, the only cable infrastructure work is the installation of CAT 5 runs for each, antenna. Since this work can be performed by any LAN (TIA 568A) certified cabling contractor, turn around time and complexity is significantly reduced when compared with installing a coax or single mode fiber cable plant. In addition, no AC power is required at the ▇▇▇ (antenna), greatly simplifying RF design, antenna placement and installation. Cable length independent design means that antenna placement locations can be chosen without having to calculate cable loss and balance the system. · Centralized Equipment — An LGCell has a nominal “wingspan” of 2 kilometers. This large reach of the LGCell system allows all the main hubs to be co-located with other communications equipment in a central location. Since the LGCell is using the same TIA 568A standards as LANs, the Expansion Hubs can typically be co-located with data hubs and routers in existing dispersed equipment closets. The ability to centralize many of the components and co-locate with data equipment means easier planning, simplified maintenance and greater equipment security. Only the LGCell Bubs, located in the equipment rooms, need AC power. The ▇▇▇’▇ are powered by the CAT 5 and are easily and inexpensively installed and moved (if necessary). · Double Star Topology — The first star in an LGCell design is the MMF cabling from the Main Hubs to the Expansion Hubs. The second star is the CAT 5 from the Expansion Hubs to the ▇▇▇’▇. A single MMF pair will support 4 antennas, reducing the fiber runs required between buildings. When LGCell Hubs are co-located with LAN equipment, the fiber runs originate and terminate in the same locations as the LAN and that fiber can be utilized without jumpering (or running new fiber). Lastly, the use of Expansion Hubs as an ▇▇▇ power source means that the antenna locations do not need to be wired for AC power. · Add Capacity Easily — Once an LGCell is in place, it is relatively simple to add more capacity as demand increases. First, capacity can be increased by adding additional carriers. If demand requires even more capacity, it is easy...
View SourceView Similar (2)
System Attributes. You understand and agree that, subject to the requirements of the Program and applicable law, all credits (including tax credits, emission reduction credits, renewable energy credits, and carbon offset credits, but excluding any Bill Credits allocated to You), benefits, incentives, attributes, and rebates, howsoever entitled, derived, or attributable from or to the System, whether existing now or in the future (the “System Attributes”), are the property of and for the benefit of SPC (or its designee), usable and transferable at its sole discretion. You agree to reasonably cooperate with SPC (or its designee) so that it may claim the System Attributes. You agree to assign and transfer to SPC (or its designee) any and all System Attributes in which You acquire an ownership interest. You agree to refrain from entering into any agreement that would entitle You or a third party toclaim the System Attributes.
View SourceView Similar (2)
System Attributes. The ECSwin program described below is used primarily for configuring and setting parameters for type U16xx summators (U1600, U1601, U1602, U1603 and U161x) within an Energy Control System (ECS LAN). Beyond this, the program is capable of acquiring energy consumption data, and visualizing them in the form of measurement value tables and graphic representations. The 32 bit programs can be used with all 32 or 64 bit versions of the Microsoft Windows operating system (Windows 95/98/ME, Windows NT/20xx/XP/Vista/7/8). Data exchange with the summators within the ECS LAN is not accomplished directly, but rather by means of a special server program which saves data from the clients to intermediate storage, maintains communication with the ECS LAN via a serial RS 232 interface (including protocol, checksum etc.) and finally forwards response data to the client. In light of this, ECSwin must be viewed as a client program. The server program can be installed to a different network PC than the client program if desired, although this is not necessary. The TCP/IP network protocol is used for communication between the server and the client. ECSDIENST.EXE or FELANIP.EXE can be used as a server program. A dedicated COM server (e.g. from W & T, which however usually only permits one client connection) can be used instead of a server program. Figure 1 provides a basic overview of the system’s expansion options.
View Source
System Attributes. Subject to § 3.2, Seller shall be entitled to receive the SGIP Deposit and all System Attributes, including SGIP Incentives, with respect to the System, consistent with Exhibit C and Exhibit D.
View Source

Related to System Attributes

  • System Logging The system must maintain an automated audit trail which can 20 identify the user or system process which initiates a request for PHI COUNTY discloses to 21 CONTRACTOR or CONTRACTOR creates, receives, maintains, or transmits on behalf of COUNTY, 22 or which alters such PHI. The audit trail must be date and time stamped, must log both successful and 23 failed accesses, must be read only, and must be restricted to authorized users. If such PHI is stored in a 24 database, database logging functionality must be enabled. Audit trail data must be archived for at least 3 25 years after occurrence.

  • System Use (a) An electronic site access system may be used on site, subject to the requirements of this statement. (b) The system operates via: (i) a facial recognition device; and (ii) an electronic gate. (c) The system will be installed at the access and egress point/s of the site and will only be utilised to identify presence on site. (d) The purpose for which the electronic site access system will be implemented is to ensure: (i) avoiding unauthorised access to site; (ii) confirmation and co-ordination of effort in emergency situations; and (iii) confirmation that all entrants to site have received a site specific induction; (e) The only personal data collected by the system is a site entrant’s: (i) image; (ii) first & last name; (iii) mobile phone number; (iv) email address; and (v) employer’s name. (the Collected Data) (f) The Collected Data will only be held or used for the purposes specified above, unless otherwise by consent or required by law. (g) The Employer will not use the electronic site access control system to verify who was on a site at a particular time for the purpose of: (i) evaluating whether a variation claim regarding labour costs made by a subcontractor can be substantiated; (ii) taking disciplinary action against an Employee, or assisting a subcontractor to take disciplinary action against its own employees, regarding their start and finish times; or (iii) otherwise generally tracking a worker’s movements whilst on the site.

  • System Upgrades The Connecting Transmission Owner shall procure, construct, install, and own the System Upgrade Facilities and System Deliverability Upgrades described in Attachment 6 of this Agreement. To the extent that design work is necessary in addition to that already accomplished in the Class Year Interconnection Facilities Study for the Interconnection Customer, the Connecting Transmission Owner shall perform or cause to be performed such work. If all the Parties agree, the Interconnection Customer may construct System Upgrade Facilities and System Deliverability Upgrades. 5.2.1 As described in Section 32.3.5.3 of the SGIP in Attachment Z of the ISO OATT, the responsibility of the Interconnection Customer for the cost of the System Upgrade Facilities and System Deliverability Upgrades described in Attachment 6 of this Agreement shall be determined in accordance with Attachment S of the ISO OATT, as required by Section 32.3.5.3.2

  • Outputs Analogue and digital outputs of protected content are allowed if they meet the requirements in this section and if they are not forbidden elsewhere in this Agreement..

  • Switching System Hierarchy and Trunking Requirements For purposes of routing ECI traffic to Verizon, the subtending arrangements between Verizon Tandem Switches and Verizon End Office Switches shall be the same as the Tandem/End Office subtending arrangements Verizon maintains for the routing of its own or other carriers’ traffic (i.e., traffic will be routed to the appropriate Verizon Tandem subtended by the terminating End Office serving the Verizon Customer). For purposes of routing Verizon traffic to ECI, the subtending arrangements between ECI Tandem Switches and ECI End Office Switches shall be the same as the Tandem/End Office subtending arrangements that ECI maintains for the routing of its own or other carriers’ traffic.