Covered Work Clause Samples
The "Covered Work" clause defines the specific materials, software, or content that are subject to the terms of the agreement or license. It typically outlines what is included as covered work, such as original code, modifications, or derivative works, and may specify exclusions. By clearly identifying what is governed by the agreement, this clause ensures that all parties understand the scope of their rights and obligations, thereby preventing disputes over what is or is not included under the license.
POPULAR SAMPLE Copied 1 times
Covered Work. This Agreement covers, without limitation all on-site preparation, surveying, construction, alteration, demolition, installation, improvement, remediation, retrofit, painting, or repair of buildings, structures and other works and related activities for the Project that is within the craft jurisdiction of one of the Unions and which is directly or indirectly part of the Project, including, without limitation to the following examples, geotechnical and exploratory drilling, temporary HVAC, landscaping and temporary fencing, pipelines (including those in linear corridors built to serve the Project), pumps, pump stations, start-up, and modular furniture installation, On-site work includes work done for the Project in temporary yards, dedicated sites, or areas adjacent to the Project, and at any on- site or off-site batch plant constructed solely to supply materials to the Project. This scope of work includes all soils and materials testing and inspection where such testing and inspection is a classification covered by an applicable Master Agreement or in which a prevailing wage determination has been published.
2.3.1 This Agreement applies to any start-up, calibration, commissioning, performance testing, repair, maintenance, and operational revisions to systems and/or subsystems for the Project performed after Completion, unless performed by District employees.
2.3.2 This Agreement covers all on-site fabrication work over which the District, Contractor(s)/Employer(s) or subcontractor(s) possess the right of control (including work done for the Project in any temporary yard or area established for the Project). Additionally, this Agreement covers any off-site work, including fabrication necessary for the Project defined herein, that is covered by a current Schedule A Agreement or local addenda to a National Agreement of the applicable Union(s) that is in effect as of the execution date of this Agreement.
2.3.3 It is expressly agreed and understood by the Parties that the District shall have the right to purchase material and equipment from any source and the craftsperson covered under this Agreement will handle and install such material and equipment. There shall be no limitation or restriction upon the choice of material or upon the full use and installation of equipment, machinery, materials, tools or other labor- saving devices other than as set forth herein. The lawful fabrication provisions of the appropriate national or local agreements shall be applicab...
Covered Work. (a) All right, title and interest to any Covered Work that Employee makes or conceives (whether alone or with others) while employed by the Company, belong to the Company. This Agreement operates as an actual assignment of all rights in Covered Work to the Company. "Covered Work" means products and Inventions that relate to the actual or anticipated business of the Company or any of its subsidiaries or affiliates, or that result from or are suggested by a task assigned to Employee or work performed by Employee on behalf of the Company or any of its subsidiaries or affiliates, or that were developed in whole or in part on the Company time or using the Company's equipment, supplies or facilities. "Inventions" mean ideas, improvements, designs, computer software, technologies, techniques, processes, products, chemicals, compounds, materials, concepts, drawings, authored works or discoveries, whether or not patentable or copyrightable, as well as other newly discovered or newly applied information or concepts. Attached hereto as Exhibit B is a description of any product or Invention in which Employee had or has any right, title or interest which is not included within the definition of "Covered Work".
Covered Work. This Agreement covers all work performed by or on behalf of the Employer in connection with the production, performance and/or presentation of any theatrical shows, concerts, meetings and events, including those held in or about the Employer’s facilities. This clause shall not preclude normal work performed by members of a road crew of a traveling attraction.
Covered Work. This Agreement covers, without limitation, all on-site site preparation, surveying, construction, alteration, demolition, installation, improvement, remediation, retrofit, painting or repair of buildings, structures and other works, and related activities for the Project that is within the craft jurisdiction of one of the Unions and that is directly or indirectly part of the Project, including, without limitation to the following examples, geotechnical and exploratory drilling, temporary HVAC, landscaping and temporary fencing, pipelines (including those in linear corridors built to serve the Project), pumps, pump stations, start-up, modular furniture installation, and final clean-up. Covered Work includes work done for the Project in temporary yards, dedicated sites, or areas adjacent to the Project, and at any on-site or off-site batch plant constructed to supply materials to the Project. Covered Work includes all soils and materials testing and inspection where such testing and inspection is a classification in which a prevailing wage determination has been published.
2.3.1 This Agreement applies to any of the following craft work: start-up, calibration, commissioning, performance testing, repair, maintenance, and operational revisions to systems and/or subsystems for the Project performed after Completion, unless performed by City employees.
2.3.2 This Agreement covers all on-site fabrication work over which the City, Contractor(s) or subcontractor(s) possess the right of control (including work done for the Project in any temporary yard or area established for the Project). This Agreement also covers any off-site work, including fabrication, that is traditionally performed by any of the Unions and is directly or indirectly part of the Project, provided such work is covered by a current Master Agreement or local addenda to a national agreement of the applicable Union(s) as of the date this agreement is effective.
2.3.3 Except for the delivery of supplies, equipment or materials that are stockpiled for later use, this Agreement covers all construction trucking work, including the hauling and delivery of ready-mix, asphalt, aggregate, sand, soil or other fill or similar material that is directly incorporated into the construction process as well as the off-hauling of soil, sand, gravel, rocks, concrete, asphalt, excavation materials, construction debris and excess fill, material and/or mud. Contractor(s)/Employer(s), including brokers, of persons providi...
Covered Work. This Agreement covers, without limitation, all site preparation, surveying, construction, alteration, demolition, installation, improvement, remediation, retrofit, painting, or repair of buildings, structures and other works, and related activities for the Project, that is within the craft jurisdiction of one of the Unions and that is directly or indirectly part of the Project, including, without limitation to the following examples, geotechnical and exploratory drilling, temporary HVAC, landscaping and temporary fencing, soils and materials testing and inspection, pipelines (including those in linear corridors built to serve the Project), pumps, pump stations, start-up, modular furniture installation, and final clean-up. Covered Work includes work done for the Project in temporary yards, dedicated sites, or areas adjacent to the Project, and at any on-site or off-site batch plant constructed solely to supply materials to the Project.
2.3.1. This Agreement applies to any start-up, calibration, commissioning, performance testing, repair, maintenance, and operational revisions to systems and/or subsystems for the Project performed after Completion, and which is covered by a Schedule A, unless performed by District employees.
2.3.2. This Agreement covers all on-site fabrication work over which the District, Contractor(s)/Employer(s), or subcontractor(s) possess the right of control (including work done for the Project in any temporary yard or area established for the Project). Additionally, this Agreement also covers any off-site work, including fabrication necessary for the Project defined herein, that is traditionally performed by any of the Unions and that is directly or indirectly part of the Project, provided such work is covered by a Master Agreement or local addenda to a national agreement of the applicable Union(s).
2.3.3. Except for the delivery of supplies, equipment or materials that are stockpiled for later use, this Agreement covers all construction trucking work, including the hauling and delivery of ready-mix, asphalt, aggregate, sand, soil or other fill or similar material that is directly incorporated into the construction process as well as the off-hauling of soil, sand, gravel, rocks, concrete, asphalt, excavation materials, construction debris and excess fill, material and/or mud shall be covered by the terms and conditions of this Agreement to the fullest extent provided by law. Contractor(s)/Employer(s), including brokers, of persons pro...
Covered Work. If any work should be covered prior to a specified or requested inspection, the Contractor shall uncover the work for observation and shall replace same at no cost to Owner. If any work has been covered which Owner has not specifically requested to observe prior to being covered, Owner may request to see such work and it shall be uncovered by the Contractor. If the uncovered work is found to be in accordance with the Contract Documents, the cost of uncovering and replacement shall, by appropriate Change Order, be charged to Owner. If the uncovered work is not in accordance with the Contract Documents, the Contractor shall pay such costs.
Covered Work. This Agreement covers, without limitation, all Construction Contracts for on-site site preparation, surveying, construction, alteration, demolition, installation, improvement, remediation, retrofit, painting of buildings, structures and other works, and related activities for Project Work that is within the craft jurisdiction of one or more of the Unions and which is directly or indirectly part of Project Work, including, without limitation to the following examples, geotechnical and exploratory drilling, temporary HVAC, landscaping and temporary fencing, pipelines (including those in linear corridors built to serve Project Work), pumps, pump stations, start-up, modular furniture installation and final clean-up. On-site work includes Project Work in temporary yards, dedicated sites, or areas adjacent to Project Work sites, and at any on- site or off-site batch plant constructed solely to supply materials to the Project. This scope of work includes all soils and materials testing and inspection where such testing and inspection is a classification in which a prevailing wage determination has been published.”
Covered Work. 2.3.1 This Agreement covers, without limitation, all on-site construction, demolition, alteration, painting or repair of buildings, structures, landscaping, temporary fencing and other works and related activities for the Projects that is within the craft jurisdiction of one of the Unions and that is part of the Projects, including, without limitation, pipelines, site preparation, survey work, demolition of existing structures and all construction, demolition or improvements required to be performed as a condition of approval by any public agency. This scope of work includes all soils and materials testing and inspection where such testing and inspection is a classification in which a prevailing wage determination has been published.
2.3.2 The Projects include work necessary for the Projects and/or in temporary yards or areas adjacent to and dedicated to the Projects, and at any on-site batch plant(s) constructed solely to supply materials to the Projects, when those sites are dedicated exclusively to the Projects. This Agreement covers all on-site fabrication work over which the City, Contractor(s) or subcontractor(s) possess the right of control (including work done for the Projects in any temporary yard or area established for the Projects.)
2.3.3 The furnishing of supplies, equipment or materials which are stockpiled for later use shall in no case be considered subcontracting. Construction trucking work, such as the delivery of ready-mix, asphalt, aggregate, sand or other fill material which are directly incorporated into the construction process as well as the off-hauling of debris and excess fill material and/or mud, shall be covered by the terms and conditions of this Agreement, to the fullest extent provided by law and by prevailing wage determinations of the California Department of Industrial Relations. Employers, including brokers, of persons providing construction trucking work shall provide certified payroll records to the City within ten (10) calendar days of written request or as required by bid specifications.
Covered Work. (a) This Agreement shall apply to all construction work performed pursuant to and within the scope of Prime Contractor's contract with The Preserve at Torry Highlands, LLC, on the Project (“Contract”), other than work excluded in Section 1.2 below
(b) Any Contractor, other than Prime Contractor, performing Covered Work on the Project shall, as a condition to working on the Project, be signatory to the Schedule A Master Agreement of the Union having trade jurisdiction over the work to be performed by that Contractor, except as provided for in Section 1.2 below. Prime Contractor agrees that, to the extent that it directly employs workers to perform Covered Work it will do so in accordance with this Agreement and the applicable Master Agreement.
(c) The Agreement shall be limited to Covered Work on the Project, undertaken pursuant to Contracts which are awarded by the Prime Contractor on or after the Effective Date, and is not intended to, and shall not govern, any construction contracts entered into prior to the Effective Date of this Agreement, or after the expiration or termination of the Agreement and expressly limited to the Project.
(d) The Parties agree that this Agreement will be made available to, and will fully apply to any bidder for Covered Work.
(e) The Unions and all Contractors agree to abide by the terms and conditions of this Agreement and that this Agreement represents the complete understanding of the Parties. No practice, understanding or agreement between a Contractor and a Union party which is not specifically set forth in this Agreement shall be binding on any Contractor or Union on this Project.
Covered Work. 2.3.1 This Agreement covers, without limitation, all on-site preparation, surveying, construction, alteration, demolition, installation, improvement, painting or repair of buildings, structures and other works, and related activities for the Project that is within the craft jurisdiction of one of the Unions and which is directly part of the Project, including, without limitation to the following examples, geotechnical and exploratory drilling, temporary HVAC, landscaping and temporary fencing, pipelines (including those in linear corridors built to serve the project), pumps, pump stations, and modular furniture installation. On-site work includes work done for the Project in temporary yards, dedicated sites, or areas adjacent to the Project, and at any on-site or off-site batch plant constructed solely to supply materials to the Project. Covered work includes all soils and materials testing and inspection where such testing and inspection is a classification in which a prevailing wage determination has been published.
2.3.2 This Agreement shall apply to any start-up, calibration, commissioning, performance testing, repair, maintenance, and operational revisions to systems and/or subsystems performed after Completion unless it is a new contract and falls below the threshold identified in section 1.11, or is performed by City Employees.
2.3.3 This Agreement covers all on-site fabrication work over which the City or Contractor(s)/ Employer(s) possess the right of control (including work done for the Project in any temporary yard or area established for the Project). Additionally, this Agreement covers any off-site work, including fabrication necessary for the Project defined herein, that is covered by a current Schedule A Agreement or local addenda to a National Agreement of the applicable Union(s) that is in effect as of the execution date of this Agreement.
2.3.2 The furnishing of supplies, equipment or materials which are stockpiled for later use shall not be covered by this Agreement. However, construction trucking work such as the delivery of ready-mix, asphalt, aggregate, sand or other fill material which are directly incorporated into the construction process as well as the off-hauling of debris and excess fill, material and/or mud, shall be covered by the terms and conditions of this Agreement. Employers, including brokers, of persons providing construction trucking work shall provide certified payroll records to the City within ten (10) days of writt...